Abstract:In the research of lower extremity exoskeleton, how to achieve synchronization between human and machine is quite significant. The intention recognition, which can be divided into three categories including EMG-based, EEG-based and biomechanics-based, is one of the effective implementation methods. In this paper, a new biomechanics-based method to realize the intention recognition is proposed. Compared with the mainstream, this method identifies the characteristic value of stride and frequency during walking, which describes human intention mathematically and concretizes the intention of human movement, improving the accuracy of recognition result and streamlining the algorithm. In addition, the impedance model is designed to further correct the recognition error. The main contents of this paper can be roughly summarized as follows. Gait feature event points are detected according to the angular signals of exoskeleton joints and the pressure signals of foot sole during the wearer’s walking process. Then the whole gait cycle is segmented by the identified gait feature event points, which is used to identify the wearer’s gait step and frequency in the gait cycle and output the trajectory transformed from standard gait trajectory by the recognized stride and frequency. Moreover, the interactive force signal collected by the three-dimensional force sensors mounted on the four-legged bar is provided as input to the designed impedance controller to adjust the transformed trajectory again. Also, the final trajectory is input to the Proportion Integral and Differential (PID) controller to realize the motion function of the lower extremity exoskeleton based on the wearer’s intention recognition result. Moreover, a simple hardware platform of lower limb exoskeleton is designed and built for practical experimental verification, which involves three kinds of gait respectively having constant stride, constant frequency and time-varying stride and frequency. The feasibility and reliability of the proposed algorithm can be concluded by analyzing the satisfactory experiment result.

Gait Event Detection of a Lower Extremity Exoskeleton Robot by an Intelligent IMU

Gait-Event-Based human intention recognition approach for lower limb

Gait Event Detection Based on Fuzzy Logic Model by Using IMU Signals of Lower Limbs

Real-Time Gait Event Detection for a Lower Extremity Exoskeleton Robot by Infrared Distance Sensors

An IMU-Based Real-Time Gait Detection Method for Intelligent Control of Knee Assistive Devices

A Novel Gait Event Detection Algorithm Using a Thigh-Worn Inertial Measurement Unit and Joint Angle Information

Inertial Measurement Unit-Based Real-Time Adaptive Algorithm for Human Walking Pattern and Gait Event Detection

An adaptive gait learning strategy for lower limb exoskeleton robot

An IMU-Based Gait Detection for a Wearable Walking Assistive Device

Simultaneous Gait Event Intention Detection Using Single sEMG Sensor for Lower Limb Exoskeleton

Gait-stride-and-frequency-based human intention recognition approach and experimental verification on lower limb exoskeleton

Research on a gait detection system and recognition algorithm for lower limb exoskeleton robot

Lower-Body Walking Motion Estimation Using Only Two Shank-Mounted Inertial Measurement Units (IMUs)

A Practical Gait Feedback Method Based on Wearable Inertial Sensors for a Drop Foot Assistance Device

Gait Pattern Identification and Phase Estimation in Continuous Multilocomotion Mode Based on Inertial Measurement Units

Machine Learning Based Adaptive Gait Phase Estimation Using Inertial Measurement Sensors

Gait Recognition Based on Minirocket with Inertial Measurement Units

A Novel Gait Detection Algorithm Based On Wireless Inertial Sensors

Method for Walking Gait Identification in A Lower Extremity Exoskeleton Based on C4.5 Decision Tree Algorithm

Convolutional Neural Network Model for Gait Classification of Flexible Lower Limb Exoskeleton

GAIT ANALYSIS USING IMU SENSOR