Abstract:We report a stable tensile recovery strain induced by a Ni4Ti3 nanoprecipitate in a Ni50.4Ti49.6 shape memory alloy (SMA) fabricated via selective laser melting (SLM), followed by a discussion on the underlying physical mechanism. In particular, the physical properties, such as morphology and size of the Ni4Ti3 nanoprecipitate were tailored by heat treatment, namely solid solution and aging treatment, of the SLM-fabricated (SLMed) SMA. The heat-treated SMA exhibited a three-stage phase transformation owing to the larger aspect ratio and smaller size of the Ni4Ti3 nanoprecipitate; furthermore, it exhibited a larger strain/stress field inside the grain interior region relative to the grain boundary region. The significantly larger endothermic and exothermic enthalpies in the heat-treated SMA relative to the SLMed counterpart were due to the substantial elimination of the dislocation and residual stress generated during SLM, and the lower Ni concentration in the B2 matrix induced by the formation of Ni-rich Ni4Ti3 nanoprecipitate. In particular, the stress-controlled loading and unloading tests led to a decrease in the endothermic and exothermic enthalpies of the heat-treated SMA. This is ascribed to the formation of stabilized B19′ martensite after the formation of high-density dislocations and enhanced strain/stress field around the coherent Ni4Ti3 nanoprecipitate during tensile cycles. Interestingly, a stable tensile recovery strain as high as 2.25–3.74% was obtained in the heat-treated SMA during the stress-controlled loading and unloading tests. Fundamentally, this was attributed to the saturation of the dislocations formed at critical tensile cycles, which can be achieved by the dislocation pile-up around the spherical Ni4Ti3 nanoprecipitate or the dislocation cut-through of the lenticular Ni4Ti3 nanoprecipitate. Finally, these results can provide significant insights into tailoring the microstructure and functional properties of NiTi SMAs by SLM.

A Study On Strain-Sense And Actuated Properties Of Tini Shape Memory Alloys

Study on Strain-Sense Property of TiNi and TiNiCu Shape Memory Alloys

Study on the mechanical properties of TiNi shape memory alloy wires using mark shearing system

Experimental Study of One‐dimensional Superelastic Capability of a Nearly Equi‐atomic NiTi Shape Memory Alloy

Experimental Study of Superelasticity of Ni-Ti Shape Memory Alloy Wires

Experimental Investigations Of Mechanical Behavior Of Superelastic Niti Shape Memory Alloy. (Sma) Wires

Superelastic and Cyclic Response of Nitisma at Various Strain Rates and Temperatures

DYNAMICAL BEHAVIOR AND CONSTITUTIVE MODEL OF SUPERELASTICITY NITI SHAPE MEMORY ALLOY WIRE : EXPERIMENT AND THEORY

Phase Transformation Behavior of Pseudoelastic Niti Shape Memory Alloys under Large Strain

Investigation on Recovery Stress and Stability of Hot-Drawn Ni47Ti44Nb9 SMA

Strain states and unique properties in cold-rolled TiNi shape memory alloys

EXPERIMENTAL EXPLORATION OF POST CONSTRAINED RECOVERY MECHANICS OF NITI

Strain Sensing Properties of Shape Memory Alloy

Stable Tensile Recovery Strain Induced by a Ni4Ti3 Nanoprecipitate in a Ni50.4Ti49.6 Shape Memory Alloy Fabricated Via Selective Laser Melting

Experimental Investigation on Local Mechanical Response of Superelastic NiTi Shape Memory Alloy

Study on Electrical Resistance Properties of NiTi Shape Memory Alloy

Investigation on the Deformation of TiNi Shape Memory Alloy with a Crack Using Moiré Interferometry

Constitutive Behavior of Ni-Ti Shape Memory Alloy under Hot Compression

Investigation On Deformation Mechanisms Of Niti Shape Memory Alloy Tube Under Radial Loading

Analysis of thermo-mechanical behavior of shape memory alloys

Time-Dependent Deformation Behavior of TiNi Shape-Memory Alloy