Abstract:As an energy-intensive industry, the iron and steel industry has been facing the challenges associated with reducing CO2 emissions. Therefore, metallurgical workers have been examining whether the steel industry can absorb some of the CO2 emissions. At high temperatures, CO2 is capable of oxidizing, which can lead to reactions with the carbon in the tuyeres raceway of the blast furnace to generate twice the volume of CO, improving the degree of indirect reduction and increasing the CO concentration in the top gas. In this study, metallurgical thermodynamics is used as the basis for constructing mathematical models of the mass and energy balance of a blast furnace and of the heat balance of a hot blast stove. Based on these models, the CO2 emission of CO2 injection into blast furnace is analyzed using the blast furnace CO2 emission model. Because of the endothermic reaction between CO2 and carbon, thermal compensation for the increases in the fuel ratio and oxygen enrichment is required. As the CO2 enrichment rate increases, the input of CO2 emission increases. However, as the CO concentration in the top gas increases and the top gas required by the hot blast stove decreases, the CO2 emission reduction at the output increases. When the CO2 enrichment limit is reached, the CO2 emission at the input increases by 530.97 kg/(tHM), the CO2 emission reduction at the output increases by 544.65 kg/(tHM), and the net CO2 emission decreases by 13.68 kg/(tHM). The high-quality top gas can replace a portion of the role of gas producers and reduce the CO2 emission of gas producers by 38.84 kg/(tHM). It can also prevent too much low-quality top gas from being released.

Effect of CO<Subscript>2</Subscript> Mix Ratios on Materials and Heat Balances of Bottom-Blowing O<Subscript>2</Subscript>–CaO Converter

Research on Top and Bottom Mixed Blowing CO2 in Converter Steelmaking Process

Physical Simulation and Industrial Testing of Bottom-Blown O2-CaO Converter for Steelmaking Process

Oxidizing Decarbonization Characteristics of MgO–C Refractories for Electric Arc Furnace Steelmaking with CO2 Utilization

Study on Metallurgical Characteristics of the Bottom-Blown O2–CaO Converter

Experimental Characterization of CO2 and CaCO3 Used in a Pyrometallurgical Vanadium-Extraction Process

Influence of Carrier Gas of Converter Oxygen Lance on Smooth Distribution of O2−CO2−CaO Mixed Jet

Influence of Bottom Blowing Oxygen on Dust Emission in Converter Steelmaking

Modeling on the Blast Furnace with CO2-enriched Hot Blast

Numerical simulation of O2/CO2 combustion in decomposition furnace

Numerical Investigation of the Limit of Coke Rate Reduction in an Ironmaking Blast Furnace (BF)

Effect Of Co2 On Vanadium Extraction And Thermal Effect In Top-Bottom Combined Blowing Converter

CO2 Emission of CO2 Injection into Blast Furnace

Optimization Dephosphorization Process of the Early Stage in 300t Steelmaking Converter with Top and Bottom Combined Blowing

Mathematical Simulation on Blast Furnace Operation of Coke Oven Gas Injection in Combination with Top Gas Recycling

Mathematical simulation and experimental study on coke oven gas injection aimed to low carbon blast furnace ironmaking

Effect of CO2 on Coal Devolatilization in Oxy-Fuel Combustion: Exploring the Influence of Temperature and Inherent Alkali/alkaline Earth Metal

Effect of CO2 atmosphere on Ca-containing mineral transformation behaviors during a Ca dominated coal co-firing with a Si/Al dominated coal in oxy-fuel condition

Integrating a Top-Gas Recycling and CO2 Electrolysis Process for H2-Rich Gas Injection and Reduce CO2 Emissions from an Ironmaking Blast Furnace

Computational Fluid Dynamics Study of the Thermochemical Behaviors in an Ironmaking Blast Furnace with Oxygen Enrichment Operation

Numerical investigation of the impact of injecting coke oven gas on raceway evolution in an ironmaking blast furnace