Abstract:Here, we reported some simulated atmospheric corrosion studies of magnesium alloy (including AZ91D and AM60) based on electrochemical impedance spectroscopy and polarization technology, and the effect of rare earth element Ce or La on corrosion behavior of magnesium alloy. In the case of AZ91D magnesium alloy, the electrochemical results reveal that the corrosion rate of AZ91D under thin electrolyte layers (TELs) is slower than that in bulk solution and decreases with the TEL thickness thinning. Bothe the anodic and cathodic reactions are restrained under TELs, especially in thickness thinning to around 200 μm and lower. For AM60 magnesium alloy and pure magnesium, the corrosion processes are also inhibited by decreasing thickness of TEL. All those corrosion rates and behavior of magnesium and its alloy are different from that of aluminum, copper and zinc alloy, which are due to the special cathodic reaction for magnesium alloy. Rare earth elements Ce or La have a strong effect on the dissolution of AM60 magnesium alloy under TEL. Typical impedance diagrams consist of two capacitive arcs at high and intermediate frequencies in all cases. At low frequencies, an arc or tail in the Nyquist plots appears sometimes disappears due to the complex corrosion reaction. Comparing to AM60, AM60 with rare earth element addition presents the 3rd capacitive loop sometimes instead of an inductive tail under the TEL thicknesses of 200 and 300 μm, which is associated with reaction taking place on the cathodic intermetallic compounds formed with rare earth elements. The EIS and polarization measurements indicate the rare earth element alloying can reduce corrosion rate of AM60 and AZ91D both under TEL and in bulk electrolyte.

Investigation of Az91d Magnesium Alloy Corrosion Behavior under Thin Electrolyte Layer Using Nondestructive Electrochemical Techniques

Electrochemical Behavior of ZE41 Magnesium Alloy under Simulated Atmospheric Corrosion

Magnesium Alloy Corrosion under Thin Electrolyte Layer Using Electrochemical Impedance Spectroscopy and Polarization Curve

Corrosion Behavior of an AZ91D Magnesium Alloy under a Heterogeneous Electrolyte Layer

Corrosion Behavior of Pure Zinc and Its Alloy under Thin Electrolyte Layer

AC Impedance Spectroscopy Study of the Corrosion Behavior of an AZ91 Magnesium Alloy in 0.1 M Sodium Sulfate Solution

Electrochemical Noise Analysis of the Corrosion of AZ91D Magnesium Alloy in Alkaline Chloride Solution

EIS Study on Corrosion Process of Anodized Film on AZ91D Magnesium Alloy

Corrosion Electrochemical Behavior of AZ31 and AZ61 Magnesium Alloys in Simulated Sea Water

Electrochemical Noise Characteristics in Corrosion Process of Az91d Magnesium Alloy in Neutral Chloride Solution

Corrosion Behavior of AZ91D Magnesium Alloy in Acidic Solution of NaCl

Study on Time-Dependent Electrochemical Corrosion Behavior of AZ31 Magnesium Alloy in NaCl Medium

ELECTROCHEMICAL NOISE ANALYSIS FOR CORROSION OF AZ91D MAGNESIUM ALLOY IN ALKALINE CHLORIDE MEDIUM

Corrosion Inhibition Effects of Corrosion Products on High-purity Mg and AZ91D under Thin Electrolyte Layers

Evaluation of microstructural effects on corrosion behaviour of AZ91D magnesium alloy

Corrosion Behavior of We54 Magnesium Alloy in 3.5%nacl Solution

Corrosion and Electrochemical Behavior of Az31d Magnesium Alloys in Sodium Chloride

Corrosion behavior of anodized AZ91D magnesium alloy in NaCl aqueous solution

Corrosion resistance of AZ91D magnesium alloy with electroless plating pretreatment and Ni–TiO2 composite coating

The Corrosion Behavior of AZ91D Magnesium Alloy in Simulated Haze Aqueous Solution

Corrosion Behaviour of AM60 Magnesium Alloys Containing Ce or La under Thin Electrolyte Layers. Part 1: Microstructural Characterization and Electrochemical Behaviour