Abstract:Brake-by-wire systems are one of the key components in intelligent/unmanned vehicles that have attracted worldwide attention. Testing and evaluation of brake-by-wire systems are a significant step during the development of the technology of vehicular braking and further the advancement of intelligent/unmanned vehicles. Using the test bench to simulate different road adhesion coefficients (i.e. road surfaces) and to complete the testing and evaluation of the vehicle braking systems is of great significance and importance. A test bench for simulation of vehicular braking of 1/4 vehicle is presented and investigated in this article. It is composed of a motor, two rollers, a 1/4 vehicle suspension system, a magnetic powder clutch, a flywheel, sensors, a signal acquisition and processing system, and a controller. The wheel and vehicle speeds are simulated by the rollers and flywheel speeds, respectively. The translational kinetic energy of 1/4 vehicle is simulated by the rotational kinetic energy of the flywheel. The signal acquisition and processing system is used to acquire and process the experimental signals, such as rotational speeds and torques during tests. The magnetic powder clutch with adjusted applied currents in the test bench is used to real-timely simulate roads with different adhesion coefficients. Based on the working principle of the test bench and the fundamentals of vehicle dynamics, the prototype of the test bench is established and the simulation approach of the translational kinetic energy of 1/4 vehicle is investigated. The mathematical model of the real-time simulation about roads with different adhesion coefficients based on the magnetic powder clutch with real-time controllable transmitted torque is established. With the built 1/4 vehicle braking systems based on the test bench and road, and the corresponding established models, the comparison and analysis of the simulation results of various road surfaces are conducted. Experiments are sequentially implemented to verify the feasibility and effectiveness of the test bench.

Study Of Vehicle Real-Time Test & Analysis System Based On Labview

Testing System for the Braking Performance of an Automobile Based on LabVIEW

Design of automatic hydraulic test bench based on LabVIEW

Design and Development of Test and Control System for Hydraulic Steering Control Unit Based on Virtual Instrument

The Study on the Handling and Stability Test of Vehicles Based on ADMS and WTK

An Automatic Testing System for Vehicle's Drive Axis Performance Test

Signal Processing Experiment Analyses of Automotive Anti-lock Braking Systems

Development of remote data acquisition system based on OPC for brake test bench

Study on vehicle braking performance detection system

Development of integrated hardware-in-the-loop (hil) test bench anti-lock brake system (abs) instrument

Novel Bench-Based Inspection Approach for Automobile Anti-Lock Braking System

Design, modeling, and verification of a test bench for braking simulation of 1/4 vehicle

SIMULATION STUDY OF VEHICLE'S ANTI-LOCK BRAKING SYSTEM

Motor Vehicle Longitudinal Performance Roadway Test System Based on CAN Technology

Road Identification Method for ABS Based on Vehicle Body Deceleration Estimation

Design and Application of Multifunctional ABS Researchand Testing System for Air-Braked Vehicle

Simulation and experimental investigation of vehicle braking system employing a fixed caliper based electronic wedge brake

Design and Performance Analysis of A Novel Regenerative Braking System for Electrified Passenger Vehicles

The Development of Dynamic Test Bench for EV Hybrid Brake System

Application of Integrated Simulation System for Air-Brake TCS Control Development

A Study on the Algorithem of Anti-skid Braking System of Vehicle Based on the Braking Decay Power