Track Reconstruction in Vertex Chamber of Bes-Ii

Gp Chen,Y Yuan,Zp Mao,Jz Bai,Hs Sun,J Liu,Wg Li,Cc Zhang,Wg Yan,Pq Li,Jf Qiu,J Yang,Cm Yang,G Rong,Jp Zhen,Hw Zhao,M Zhao,Y Xie

1998-01-01

Abstract:This paper describes the algorithm of the non-numerical pattern recognition used in the VC of BES-II. The code is good to provide the spacial resolution and the effeciency of the track found by M.C. data and experimental data.

What problem does this paper attempt to address?

A 3D Laser Scanning Mountain Tunnel Processing Method Based on ICP Algorithm

Han Zhao,Yicheng Wang,Xu Xie,Peifeng Li,G. Y. Tang

DOI: https://doi.org/10.1117/12.3020850

2024-01-01

Abstract:This article introduces three-dimensional laser scanning technology for monitoring in the application field of mountain tunnels, and proposes a full cycle deformation point cloud processing method ICP algorithm for mountain tunnels. Firstly, the tunnel point cloud is cut into a single circular point cloud. After denoising the point cloud, the ICP algorithm is used to accurately register the two phase point clouds. After registration, the corresponding original point cloud and target point cloud with the closest and farthest Euclidean distance are calculated, which are the maximum deformation points. At the same time, after registration, the deformation settlement at the top of the tunnel can be obtained by calculating the highest point deformation. Leica Scanstation C10 is used to obtain the data of Qinghe project mountain tunnel, which proves that the method proposed in this paper has practical significance in tunnel section Deformation monitoring.
Track reconstruction using the TSF method for the BESIII main drift chamber

Liu Qiu-Guang,Zang Shi-Lei,Li Wei-Guo,Mao Ze-Pu,Bian Jian-Ming,Cao Guo-Fu,Cao Xue-Xiang,Chen Shen-Jian,Deng Zi-Yan,Fu Cheng-Dong,Gao Yuan-Ning,He Kang-Lin,He Miao,Hua Chun-Fei,Huang Bin,Huang Xing-Tao,Ji Xiao-Bin,Li Fei,Li Hai-Bo,Li Wei-Dong,Liang Yu-Tie,Liu Chun-Xiu,Liu Huai-Min,Liu Suo,Liu Ying-Jie,Ma Qiu-Mei,Ma Xiang,Mao Ya-Jun,Mo Xiao-Hu,Pan Ming-Hua,Pang Cai-Ying,Ping Rong-Gang,Qin Gang,Qin Ya-Hong,Qiu Jin-Fa,Sun Sheng-Sen,Sun Yong-Zhao,Wang Ji-Ke,Wang Liang-Liang,Wen Shuo-Pin,Wu Ling-Hui,Xie Yu-Guang,Xu Min,Yan Liang,You Zheng-Yun,Yu Guo-Wei,Yuan Chang-Zheng,Yuan Ye,Zhang Bing-Yun,Zhang Chang-Chun,Zhang Jian-Yong,Zhang Xue-Yao,Zhang Yao,Zheng Yang-Heng,Zhu Ke-Jun,Zhu Yong-Sheng,Zhu Zhi-Li,Zou Jia-Heng

DOI: https://doi.org/10.1088/1674-1137/32/7/011

IF: 2.944

2008-07-01

Chinese Physics C

Abstract:We describe the algorithm to reconstruct the charged tracks for BESIII main drift chamber at BEPCII, including the track finding and fitting. With a new method of the Track Segment Finder (TSF), the results of present study indicate that the algorithm can reconstruct the charged tracks over a wide range of momentum with high efficiency, while improving the robustness against the background noise in the drift chamber. The overall performances, including spatial resolution, momentum resolution and secondary vertices reconstruction efficiency, etc. satisfy the requirements of BESIII experiment.

physics, particles & fields, nuclear
Track Reconstruction In Bes Barrel Shower Counter

Haiwen Zhao,Taijie Wang,Zepu Mao,Jin Li,Hongtao Liu,Weiguo Li,Wuguang Yan,GuangPei Chen,Jing Liu,Peiqin Li,Gang Rong,Ye Yuan

1999-01-01

Abstract:The track reconstruction of BES barrel shower counter was presented and the shower finding, pattern recognition technique were described. The reconstruction results from experimental data were presented and discussed.
Dual-basis Reconstruction Techniques for Tomographic PIV

ZhiJian Ye,Qi Gao,HongPing Wang,RunJie Wei,JinJun Wang

DOI: https://doi.org/10.1007/s11431-015-5909-x

2015-01-01

Science China Technological Sciences

Abstract:As an inverse problem, particle reconstruction in tomographic particle image velocimetry attempts to solve a large-scale underdetermined linear system using an optimization technique. The most popular approach, the multiplicative algebraic reconstruction technique (MART), uses entropy as an objective function in the optimization. All available MART-based methods are focused on improving the efficiency and accuracy of particle reconstruction. However, those methods do not perform very well on dealing with ghost particles in highly seeded measurements. In this report, a new technique called dual-basis pursuit (DBP), which is based on the basis pursuit technique, is proposed for tomographic particle reconstruction. A template basis is introduced as a priori knowledge of a particle intensity distribution combined with a correcting basis to enable a full span of the solution space of the underdetermined linear system. A numerical assessment test with 2D synthetic images indicated that the DBP technique is superior to MART method, can completely recover a particle field when the number of particles per pixel ( ppp ) is less than 0.15, and can maintain a quality factor Q of above 0.8 for ppp up to 0.30. Unfortunately, the DBP method is difficult to utilize in 3D applications due to the cost of its excessive memory usage. Therefore, a dual-basis MART was designed that performed better than the traditional MART and can potentially be utilized for 3D applications.
3D SPECTRUM IMAGING AND COMPUTER RECONSTRUCTION SYSTEM

Huajun Feng,Zhihai Xu,Qi Li,Meijuan Bian,Hao Yin

2000-01-01

Abstract:A new 3D computer vision approach, 3D spectrum imaging and reconstruction system, is proposed in this paper. The basic principal and structure of the system is introduced, the formulas to obtain the 3D information is deduced on the base of triangular algorithm, and the experiment result is given. As it shows in the paper, this new 3D computer vision system is clear in its principal, fast in its accurate computation, and simple in its structure. The fast 3D objects imaging and reconstruction features of this system can make it possible to be used in practical applications.
Gauss Ball+ Based Quadratic Surface Sub-Decomposition and Recognition

Zhan Ding,Zhiyang Chen,Sanyuan Zhang,Yin Zhang,Xiuzi Ye

DOI: https://doi.org/10.3321/j.issn:1003-9775.2007.01.006

2007-01-01

Abstract:The mesh was first decomposed into multiple rough segments using principal curvature. Then based on Gauss Ball+ method, the algorithm detected the type of quadratic surface in each rough segment and sub-decomposed and re-clustered them. Finally it recognized each sub-decomposed meshes into quadratic surfaces. Results show that this method can quickly and automatically decompose quadratic surfaces from part, and can be well embedded into reverse engineering to recognize the parameters of quadratic surface.
Gradient Descent Based Restoration Method of Track Irregularity in Asymmetric Chord Reference Method

Chen Zeng,Wei Guo,Han-yun Liu,Zhi-wu Yu,Li-zhong Jiang,Zhen Guo,Sui Tan

DOI: https://doi.org/10.1007/s11771-023-5449-7

2024-01-01

Journal of Central South University

Abstract:This paper proposes a gradient descent based restoration method of track irregularity. Based on the theory of asymmetric chord-reference method (CRM), the restoration of track irregularity is described as an optimization problem for an underdetermined linear system. Gradient descent method is employed to solve this optimization problem, where a quadratic cost function considering penalization is used. To evaluate the performance of the proposed method, an inspection trolley was setup and used in a field test on a scaled bridge model. Comparison between the proposed method and level measurement validates a good accuracy of gradient descent based restoration method. Compared with traditional method which needs a specially designed inverse filter, the proposed method has a clear physical meaning, which only needs configuration of asymmetric CRM and measured chord reference value to establish the optimization model. This suggests that gradient descent method has good operability in the field test. And the repeatability assessment reveals that the proposed method has a good track irregularity restoration reproduction capacity.
Primary Vertex Reconstruction Based on the Kalman Filter Technique at BESIII

Xu Min,He Kang-Lin,Zhang Zi-Ping,Wang Yi-Fang,Bian Jian-Ming,Fu Cheng-Dong,Huang Bin,Ji Xiao-Bin,Sun Sheng-Sen,Yan Liang,Zhang Jian-Yong

DOI: https://doi.org/10.1088/1674-1137/34/1/017

2010-01-01

Abstract:Primary vertex reconstruction is crucial to estimate the beam profile in collision experiments. We study the principle of an iterative process, called the Kalman filter method, and apply it to primary vertex reconstruction at BESIII. A Newton procedure to find the zero point of the distance function's gradient is used for primary vertex finding in 3-dimensional space. Results are obtained based on raw data at BESIII.
Besiii Track Extrapolation and Matching

Wang Liang-Liang,Yuan Chang-Zheng,Ma Qiu-Mei,Ma Xiang,Wang Da-Yong,Deng Zi-Yan,You Zheng-Yun,Mao Ze-Pu,Wen Shuo-Pin,Sun Yong-Zhao,Liu Huai-Min,Liu Chun-Xiu,Li Wei-Dong,Wu Ling-Hui,Zhang Chang-Chun,Qiu Jin-Fa,He Kang-Lin,He Miao,Zhang Xue-Yao,Zhang Yao,Ji Xiao-Bin,Zheng Zhi,Mao Ya-Jun,Yu Guo-Wei,Yuan Ye,Jiang Lin-Li,Xie Yu-Guang,Zang Shi-Lei

DOI: https://doi.org/10.3321/j.issn:0254-3052.2007.02.011

2007-01-01

Abstract:A GEANT4 based, Object-Oriented package, TrkExtAlg, is developed for extrapolating the BESIII MDC track into outer sub-detectors. The magnetic deflection and ionization loss of the particle in the BESIII detector is considered, the algorithm supplies the position and the momentum of the track in all the outer sub-detectors, as well as the error matrix at any given hit point with the multiple scattering effect taken into account. Through comparing the results of track extrapolation with the results of a full simulation and checking the results and application of track matching with hits in outer sub-detectors, TrkExtAlg is proved to be reliable.
BESIII track fitting algorithm

Wang Ji-Ke,Mao Ze-Pu,Bian Jian-Ming,Cao Guo-Fu,Cao Xue-Xiang,Chen Shen-Jian,Deng Zi-Yan,Fu Cheng-Dong,Gao Yuan-Ning,He Kang-Lin,He Miao,Hua Chun-Fei,Huang Bin,Huang Xing-Tao,Ji Xiao-Bin,Li Fei,Li Bai-Bo,Li Wei-Dong,Liang Yu-Tie,Liu Chun-Xiu,Liu Huai-Min,Liu Suo,Liu Ying-Jie,Ma Qiu-Mei,Ma Xiang,Mao Ya-Jun,Mo Xiao-Hu,Pan Ming-Hua,Pang Cai-Ying,Ping Rong-Gang,Qin Ya-Hong,Qiu Jin-Fa,Sun Sheng-Sen,Sun Yong-Zhao,Wang Liang-Liang,Wen Shuo-Pin,Wu Ling-Hui,Xie Yu-Guang,Xu Min,Yan Liang,You Zheng-Yun,Yuan Chang-Zheng,Yuan Ye,Zhang Bing-Yun,Zhang Chang-Chun,Zhang Jian-Yong,Zhang Xue-Yao,Zhang Yao,Zheng Yang-Heng,Zhu Ke-Jun,Zhu Yong-Sheng,Zhu Zhi-Li,Zou Jia-Heng

DOI: https://doi.org/10.1088/1674-1137/33/10/010

IF: 2.944

2009-10-01

Chinese Physics C

Abstract:A track fitting algorithm based on the Kalman filter method has been developed for BESIII of BEPCII. The effects of multiple scattering and energy loss when the charged particles go through the detector, non-uniformity of magnetic field (NUMF) and wire sag, etc., have been carefully handled. This algorithm works well and the performance satisfies the physical requirements tested by the simulation data.

physics, particles & fields, nuclear
Adaptive Multitrack Reconstruction for Particle Trajectories Based on Fuzzy C-Regression Models

Niu Li-Bo,Li Yu-Lan,Huang Meng,Fu Jian-Qiang,He Bin,Li Yuan-Jing

DOI: https://doi.org/10.1088/1674-1137/39/3/036201

2015-01-01

Abstract:In this paper, an approach to straight and circle track reconstruction is presented, which is suitable for particle trajectories in an homogenous magnetic field (or 0 T) or Cherenkov rings. The method is based on fuzzy c-regression models, where the number of the models stands for the track number. The approximate number of tracks and a rough evaluation of the track parameters given by Hough transform are used to initiate the fuzzy c-regression models. The technique effectively represents a merger between track candidates finding and parameters fitting. The performance of this approach is tested by some simulated data under various scenarios. Results show that this technique is robust and could provide very accurate results efficiently.
Track Reconstruction Using A 3-D Map of the Target Magnetic Field

Si-guang Wang,Ya-jun Mao,Hong-xue Ye,Bo Zhu

DOI: https://doi.org/10.1016/j.nima.2008.09.007

2008-01-01

Abstract:Magnetic fields are often applied to the target zone of a particle beam to maintain the polarization of gaseous targets, as with the HERMES experiment. The same field bends the trajectories of charged particles, however, introducing errors in vertex reconstruction.This paper describes a method for accurately describing relativistic charged particle transport within a 3-dimensional (3-D), non-uniform magnetic field. The algorithm is tested on HERMES experimental data, and is shown to substantially improve the K(s)(0) resonance in the pi(+)pi(-) invariant mass spectrum. Indeed, corrected data taken with target magnet switched on are as good as data taken with magnet switched off. The method can easily be applied to other experiments given a 3-D magnetic field map of the target region. The relevant code is provided in an Appendix. (C) 2008 Elsevier B.V. All rights reserved.
Simulation study of BESIII with stitched CMOS pixel detector using ACTS

Yi Liu,Xiaocong Ai,Guangyan Xiao,Yaxuan Li,Linghui Wu,Liangliang Wang,Jianing Dong,Mingyi Dong,Qinglin Geng,Min Luo,Yan Niu,Anqing Wang,Chenxu Wang,Meng Wang,Lei Zhang,Liang Zhang,Ruikai Zhang,Yao Zhang,Minggang Zhao,Yang Zhou

2023-09-06

Abstract:Reconstruction of tracks of charged particles with high precision is very crucial for HEP experiments to achieve their physics goals. As the tracking detector of BESIII experiment, the BESIII drift chamber has suffered from aging effects resulting in degraded tracking performance after operation for about 15 years. To preserve and enhance the tracking performance of BESIII, one of the proposals is to add one layer of thin CMOS pixel sensor in cylindrical shape based on the state-of-the-art stitching technology, between the beam pipe and the drift chamber. The improvement of tracking performance of BESIII with such an additional pixel detector compared to that with only the existing drift chamber is studied using the modern common tracking software ACTS, which provides a set of detector-agnostic and highly performant tracking algorithms that have demonstrated promising performance for a few high energy physics and nuclear physics experiments.

Instrumentation and Detectors,High Energy Physics - Experiment
A 3D Track Reconstruction Algorithm for Pre-research of the STCF MDC L1 Trigger

Yidi Hao,Changqing Feng,Zixuan Zhou,Wenhao Dong,Zhujun Fang,Xueye Hu,Hang Zhou,Shubin Liu

DOI: https://doi.org/10.1109/tns.2024.3503068

IF: 1.703

2024-01-01

IEEE Transactions on Nuclear Science

Abstract:The proposed STCF (Super Tau Charm Facility) is an electron-positron collider with high luminosity. Under the conditions of a high radiation, high counting-rate environment, and a pure physics event rate of up to 400 kHz, for a Level 1 (L1) trigger system, it is crucial to suppress background events to an acceptable rate. To this end, this study presents a threedimensional (3D) track reconstruction algorithm for the preresearch of the STCF main drift chamber (MDC) L1 trigger. The proposed algorithm can reject tracks outside the interaction region and provide 3D track information to the global trigger logic (GTL) of an L1 trigger for further analysis with other sub-detectors. By using hit information from the MDC and the transverse momentum ( pT ) and azimuthal angle (ϕ) from previous research on two-dimensional reconstruction, this study reconstructs the z (longitudinal) position for the track vertex using a neural network-based method with an innovative stereo track segment design. The neural network is trained using high granularity quantization (HGQ) to reduce resource consumption while maintaining resolution. The proposed method is implemented into a field programmable gate array (FPGA) using the hls4ml. The achieved resolution of the z-vertex reconstruction of a single track (z ∈ [-50, 50]cm) is approximately 2.8 cm, which can ensure rejecting 97% beam background tracks in a ± 3σ interval.
A High-Precision Reconstruction Algorithm of 3D Data Fields Based on Quasi-interpolation

Jia Lu,Rui Wang,Meie Fang,Qunsheng Peng

DOI: https://doi.org/10.3969/j.issn.1003-9775.2013.08.002

2013-01-01

Abstract:3D data field reconstruction is a fundamental and an important step for volume modeling and analysis. The precision of reconstruction affects directly the accuracy of the following process such as data resampling and analysis. Based on the quasi-interpolation theory, we develop a novel estimate of the reconstruction error which fully explores the intrinsic information embedded in the volume data and have arrived at a minimum of the reconstruction error under the L2 measurement by conducting a global optimization. Experimental results on various examples demonstrate the effectiveness of the proposed algorithm in reducing the reconstruction error and retaining the high-frequency details of the dada field.
Three-dimensional reconstruction optimization of tunnel face and intelligent extraction of discontinuity orientation based on binocular stereo vision

Min Song,Quan Ma,Wenpin Yan,Haiqiang Lv,Leping Ren,Qinzheng Yang,Hongtian Wang,Ying Zhao,Ang Li

DOI: https://doi.org/10.3389/feart.2023.1314378

IF: 2.9

2024-01-03

Frontiers in Earth Science

Abstract:In the process of grading and dynamically optimizing the design and construction parameters of the surrounding rock mass of a rock tunnel face, efficiently and accurately acquiring the geometrical parameters of the rock discontinuities is an important basic task. To address the problems of time consuming, low accuracy, and high danger associated with traditional methods of obtaining the structural information of rock mass, this paper proposes a method for three-dimensional reconstruction and intelligent information extraction of tunnel face based on binocular stereo vision (BSV). First, the parallel binocular device with a single camera was improved, calibrated using the checkerboard calibration method. By integrating with the semi-global matching algorithm, the BSV based method for the three-dimensional reconstruction of the rock mass of the tunnel face was optimized. Furthermore, based on the results from on-site engineering applications, this study leveraged two parameters, point cloud density and algorithm runtime, to determine the optimal values for the disparity range and window size parameters within the semi-global stereo matching algorithm. This enhancement improved the performance of the 3D reconstruction method based on binocular stereo vision. Finally, efficient and refined intelligent methods for extracting structural parameters of the rock mass were proposed based on k-nearest neighbor search and kernel density estimation. The research results can provide reliable technical support for the intelligent and efficient acquisition of rock mass structural information in rock tunnel engineering faces.

geosciences, multidisciplinary
Track Reconstruction Based on Hough-transform for Ntpc

Niu Li-Bo,Li Yu-Lan,Huang Meng,He Bin,Li Yuan-Jing

DOI: https://doi.org/10.1088/1674-1137/38/12/126201

IF: 2.944

2014-01-01

Chinese Physics C

Abstract:A GEM-TPC prototype, which will be used as a fast neutron spectrometer based on the recoil proton method, is designed and being constructed in Tsinghua University. In order to derive the recoil angle of the recoil proton, tracks of recoil proton in the TPC sensitive volume must be reconstructed. An algorithm based on Houghtransform for track finding and least square method for track fitting was developed in this paper. Based on the Monte Carlo simulation data given by Geant 4, a detailed track reconstruction process was introduced and the spectrum of induced fast neutron was derived here. The results show that the algorithm was effective and high-performance.With the recoil angle of the proton less than 30°, a 4.4% FWHM neutron energy resolution was derived for 5 Me V induced fast neutron, and the detection efficiency was about 2×10-4.
Track Recognition for the $ΔE-E$ Telescopes with Silicon Strip Detectors

Fenhai Guan,Yijie Wang,Xinyue Diao,Yuhao Qin,Zhi Qin,Dong Guo,Qianghua Wu,Dawei Si,Sheng Xiao,Boyuan Zhang,Yaopeng Zhang,Xuan Zhao,Zhigang Xiao

DOI: https://doi.org/10.48550/arXiv.2110.08261

2021-10-18

Instrumentation and Detectors

Abstract:For the high granularity and high energy resolution, Silicon Strip Detector (SSD) is widely applied in assembling telescopes to measure the charged particles in heavy ion reactions. In this paper, we present a novel method to achieve track recognition in the SSD telescopes of the Compact Spectrometer for Heavy Ion Experiment (CSHINE). Each telescope consists of a single-sided silicon strip detector (SSSSD) and a double-sided silicon strip detector (DSSSD) backed by $3 \times 3$ CsI(Tl) crystals. Detector calibration and track reconstruction are implemented. Special decoding algorithm is developed for the multi-track recognition procedure to deal with the multi-hit effect convoluted by charge sharing and the missing signals with certain probability. It is demonstrated that the track recognition efficiency of the method is approximately 90\% and 80\% for the DSSSD-CsI and SSSSD-DSSSD events, respectively.
BIT: Biologically Inspired Tracker

Bolun Cai,Xiangmin Xu,Xiaofen Xing,Kui Jia,Jie Miao,Dacheng Tao

DOI: https://doi.org/10.48550/arXiv.1904.10411

2019-04-23

Computer Vision and Pattern Recognition

Abstract:Visual tracking is challenging due to image variations caused by various factors, such as object deformation, scale change, illumination change and occlusion. Given the superior tracking performance of human visual system (HVS), an ideal design of biologically inspired model is expected to improve computer visual tracking. This is however a difficult task due to the incomplete understanding of neurons' working mechanism in HVS. This paper aims to address this challenge based on the analysis of visual cognitive mechanism of the ventral stream in the visual cortex, which simulates shallow neurons (S1 units and C1 units) to extract low-level biologically inspired features for the target appearance and imitates an advanced learning mechanism (S2 units and C2 units) to combine generative and discriminative models for target location. In addition, fast Gabor approximation (FGA) and fast Fourier transform (FFT) are adopted for real-time learning and detection in this framework. Extensive experiments on large-scale benchmark datasets show that the proposed biologically inspired tracker performs favorably against state-of-the-art methods in terms of efficiency, accuracy, and robustness. The acceleration technique in particular ensures that BIT maintains a speed of approximately 45 frames per second.
Study of the Tracking Method and Expected Performance of the Silicon Pixel Inner Tracker Applied in BESIII

Qinglei Xiu,Mingyi Dong,Weidong Li,Huaimin Liu,Qiumei Ma,Qun Ouyang,Zhonghua Qin,Liangliang Wang,Linghui Wu,Ye Yuan,Yao Zhang

DOI: https://doi.org/10.48550/arXiv.1510.08558

2015-10-29

Abstract:The inner drift chamber of the BESIII is encountering serious aging problem after five year's running. For the first layer, the decrease in gas gain is about 26% from 2009 to 2013. The upgrade of the inner tracking detector has become an urgent problem for the BESIII experiment. An inner tracker using CMOS pixel sensors is an important candidate because of its great advantages on spatial resolution and radiation hardness. In order to carry out a Monte Carlo study on the expected performance, a Geant4-based full simulation for the silicon pixel detector has been implemented. The tracking method combining the silicon pixel inner tracker and outer drift chamber has been studied and a preliminary reconstruction software was developed. The Monte Carlo study shows that the performances including momentum resolution, vertex resolution and the tracking efficiency are significantly improved due to the good spatial resolution and moderate material budget of the silicon pixel detector.

Instrumentation and Detectors,High Energy Physics - Experiment

Track Reconstruction in Vertex Chamber of Bes-Ii

A 3D Laser Scanning Mountain Tunnel Processing Method Based on ICP Algorithm

Track reconstruction using the TSF method for the BESIII main drift chamber

Track Reconstruction In Bes Barrel Shower Counter

Dual-basis Reconstruction Techniques for Tomographic PIV

3D SPECTRUM IMAGING AND COMPUTER RECONSTRUCTION SYSTEM

Gauss Ball+ Based Quadratic Surface Sub-Decomposition and Recognition

Gradient Descent Based Restoration Method of Track Irregularity in Asymmetric Chord Reference Method

Primary Vertex Reconstruction Based on the Kalman Filter Technique at BESIII

Besiii Track Extrapolation and Matching

BESIII track fitting algorithm

Adaptive Multitrack Reconstruction for Particle Trajectories Based on Fuzzy C-Regression Models

Track Reconstruction Using A 3-D Map of the Target Magnetic Field

Simulation study of BESIII with stitched CMOS pixel detector using ACTS

A 3D Track Reconstruction Algorithm for Pre-research of the STCF MDC L1 Trigger

A High-Precision Reconstruction Algorithm of 3D Data Fields Based on Quasi-interpolation

Three-dimensional reconstruction optimization of tunnel face and intelligent extraction of discontinuity orientation based on binocular stereo vision

Track Reconstruction Based on Hough-transform for Ntpc

Track Recognition for the $ΔE-E$ Telescopes with Silicon Strip Detectors

BIT: Biologically Inspired Tracker

Study of the Tracking Method and Expected Performance of the Silicon Pixel Inner Tracker Applied in BESIII