Abstract:With continuous technological development, the future development trend of LiDAR in the field of remote sensing and mapping is to obtain the elevation and spectral information of ground targets simultaneously. Airborne hyperspectral imaging LiDAR inherits the advantages of active and passive remote sensing detection. This paper presents a simulation method to determine the design parameters of an airborne hyperspectral imaging LiDAR system. In accordance with the hyperspectral imaging LiDAR equation and optical design principles, the atmospheric transmission model and the reflectance spectrum of specific ground targets are utilized. The design parameters and laser emission spectrum of the hyperspectral LiDAR system are considered, and the signal-to-noise ratio of the system is obtained through simulation. Without considering the effect of detector gain and electronic amplification on the signal-to-noise ratio, three optical fibers are coupled into a detection channel, and the power spectral density emitted by the supercontinuum laser is simulated by assuming that the signal-to-noise ratio is equal to 1. The power spectral density emitted by the laser must not be less than 15 mW/nm in the shortwave direction. During the simulation process, the design parameters of the hyperspectral LiDAR system are preliminarily demonstrated, and the feasibility of the hyperspectral imaging LiDAR system design is theoretically guaranteed in combination with the design requirements of the supercontinuum laser. The spectral resolution of a single optical fiber of the hyperspectral LiDAR system is set to 2.5 nm. In the actual prototype system, multiple optical fibers can be coupled into a detection channel in accordance with application needs to further improve the signal-to-noise ratio of hyperspectral LiDAR system detection.

Real-time Analysis and Simulation of Remote Sensing Photoelectric Information from Aerospace Fourier Transform Infrared Spectrometer

A Spectroscopic Transmittance Analytical Modeling for Field-Widened Michelson Interferometer Employed by High Spectral Resolution Lidars

Design and Implementation of Data Acquisition System of Fourier Transform Infrared Spectrometer

Analysis on Simulation of Remote Sensing Image and Its Application

Stray Light Analysis and Suppression for an Infrared Fourier Imaging Spectrometer

Intensity Simulation of a Fourier Transform Infrared Spectrometer

Simulation of Remote Sensing Images Using High-Resolution Data and Spectral Libraries

Spaceborne Hyperspectral Image Generation Based on Airborne Hyperspectral Image

Design and realization of an long-wave infrared hyperspectral imaging system

Parameter Simulation and Design of an Airborne Hyperspectral Imaging LiDAR System

Research on snapshot infrared computational spectral imaging technology

Research on Verification of Infrared Scene Simulation Model Based on Remote Sensing Data

Optical Design of a Hyperspectral Remote-Sensing System Based on an Image-Slicer Integral Field Unit in the Short-Wave Infrared Band

Optical Design and Test of a Infrared Hyperspectral Imaging System

Analysis of System Parameters for Interferometric Imaging Spectrometer

Research on Photonic Integrated Interferometric Imaging Mechanism and Space Spectrum Coverage

Optical Design of Infrared Bispectrum Fourier Transform Imaging Spectrometer

System design and description of infrared simulator system based on the multidimensional flight table

Research on System Spectral Response Functions’ Calibration and Data Processing Methods for Computational Imaging Spectrometers Based on Filter Modulation

[Evaluation of sensor spectral parameters for the simulation accuracy of the vegetation spectrum]

Rotary Fourier Transform Infrared Spectrometer Measurement System