Abstract:The positioning accuracy of the footprint of a satellite laser altimeter is primarily dependent on the accuracy of its laser pointing, e.g., a 30 arcsec pointing bias will induce 87 m horizontal error and 1.5 m vertical error when the altitude is 600 km and the laser incident angle is 1?. In order to achieve the three-dimensional high-precision observation on the Earth surface, on-orbit calibration is needed to remove the systematic pointing bias mainly arising from the thermal effect. The current methods of on-orbit calibration and verification for laser altimeters are the attitude maneuvering and the footprint detection, respectively. However, the attitude maneuvering is not applicable to the existing satellite platform of China, which uses the large platform with a three-axis attitude stabilization system. The current footprint detection method can only achieve on-orbit verification task, i.e., the horizontal and vertical errors can be evaluated by analyzing the captured laser footprints but the systematic pointing bias cannot be estimated and removed. An improved design scenario of energy detector that is used for capturing laser footprint is given in this paper. The quantification level of the captured laser energy is equal to 8, which is bigger than that of the energy detector designed for geoscience laser altimeter systems corresponding to level 2. Benefiting from the new design scenario, fewer detectors are needed to achieve the same precision when calculating the centroid geolocations of captured footprints. A new systematic misalignment estimation model in the laser direction cosines is deduced, and it is used to estimate the systematic bias by using the detected footprints based on the Gauss-Markoff criterion. With the new detectors and bias estimation model, the footprint detection method now can achieve on-orbit calibration, as well as on-orbit verification. According to the presented calculation model, simulation experiments are operated to analyse three effects that may influence the performance of the footprint detection on-orbit calibration, i.e., the laser incident angle on the detector array, the surface roughness of the site where detectors lay out, and the grid density of the detector array. The simulation results indicate that, when the horizontal positioning accuracy of the captured footprint centroid demands better than 1.8 m which corresponds to 0.6 arcsec laser pointing accuracy when the altitude of the satellite is 600 km, the grid distance of the detector array can be 20 m, the laser incident angle on the detector array should be larger than 3?, and the surface roughness of the calibration site should be less than 0.1 m. The designed detectors and calibration method will be used to capture laser footprints and remove the systematic bias for the laser altimeter on China GF-7 satellite, which is one of the upcoming high-resolution satellites for Earth observation.

On-board Spectral Calibration Algorithm for an Airborne Hyperspectral Imager and Elimination of the Effect of the Atmospheric Underlying Surface.

Preflight Spectral Calibration of Airborne Shortwave Infrared Hyperspectral Imager with Water Vapor Absorption Characteristics.

On-Orbit Calibration of Satellite Laser Altimeters Based on Footprint Detection

On-Site Spectral Calibration Of Hyperspectral Imager Using Target Spectral Features

Spectral Recalibration for In-Flight Broadband Sensor Using Man-Made Ground Targets.

Simulation study on spectral calibration of hyperspectral imagery based on target absorption features

In-Flight Spectral Calibration of Uav Hyperspectral Imager Based on Radiance Matching

Retrieval of Spectral Characteristics of Hyperspectral Sensor and Retrieval of Reflectance Spectra

On-Orbit Radiometric Calibration of Hyperspectral Sensors on Board Micro-Nano Satellite Constellation Based on RadCalNet Data

Radiometric crosscalibration of the ZY102D hyperspectral imager using the GF5 AHSI imager

Radiometric Cross-Calibration of the ZY1-02D Hyperspectral Imager Using the GF-5 AHSI Imager

Toward High Altitude Airship Ground-Based Boresight Calibration of Hyperspectral Pushbroom Imaging Sensors

Calibration method of relative spectral response function of indirect imaging spectrometer

Radiometer-to-imager in-flight cross calibration and verification

An Automatic Radiometric Cross-Calibration Method for Wide-Angle Medium-Resolution Multispectral Satellite Sensor Using Landsat Data

Improved Methods for Spectral Calibration of On-Orbit Imaging Spectrometers.

Atmospheric correction system for airborne thermal infrared imaging spectrometer: general design

The Uncertainty of SNO Cross-Calibration for Satellite Infrared Channels

Radiometric Cross-Calibration of HJ-2A/CCD3 Using the Random Forest Algorithm and a Spectral Interpolation Convolution Method with Sentinel-2/MSI

A Target-based Calibration Method for LiDAR-Visual-Thermal Multi-Sensor System.

Radiometric Cross Calibration of HY-1C/COCTS Based on Sentinel-3/OLCI