Abstract:The thermal characterization of power devices is an inevitable task in the industry. Thermal transient testing is one of the major tools for this characterization, as it is not only capable of giving information about the actual thermal parameters but may also reveal the root cause of potential device failures. The testing may occur on single packages or modules on a dedicated standard test bench, or "in situ", in an actual assembly. The testing process itself is very fast in both cases, on the order of seconds, but the transient measurement needs to be preceded by a calibration step to determine the temperature dependence of a temperature-sensitive parameter (TSP) of the semiconductor device. This may require a long time, as the device has to be measured at many stabilized temperatures, which in the case of power devices may take hours. It also has to be considered that, especially in "in situ" measurements, reaching the highest device temperatures of power devices may even damage other parts of the surrounding electronics. Moreover, the temperature distribution inside a module will be different at calibration time than during operation with the same junction temperature, as bond wires and copper traces do not reach the chip temperature in the latter case. This paper presents a methodology that can be used to replace the lengthy measurement of one parameter at many temperatures with a fast single I–V characteristics measurement at room temperature. Physics-based calculations assign a unique temperature-sensitive parameter to each item of interest in the system. After the presentation of the theoretical background, the usability of the method is demonstrated by verifying measurements on silicon power devices.

Study On Application Of Power Amplifier For I-V Characteristic

Investigation on conductive electromagnetic pulse (EMP) effects on the breakdown of GaAs MESFET-built power amplifiers (PA)

Electrothermal Effects on Performance of GaAs HBT Power Amplifier During Power Versus Time (PVT) Variation at GSM/DCS Bands

A Cascaded Linear High-Voltage Amplifier Circuit for Dielectric Measurement

A Circuit Design in Piezoelectric Vibration Measurement System

High efficiency class-E RF power amplifier for wireless power transfer system

Ferroelectric materialⅠ-Ⅴcharacteristic measurement system

Measurement on Ferroelectic Performance of Ferroelectic Thin Films

Compare and Experiment on High-Voltage Amplifier Modulated by Sine Wave and Square Wave

On the evaluation of output voltages for quantifying the performance of pyroelectric energy harvesters

Three-phase Measurement System for Electric Energy Parameters Based on Virtual Instrument

Characteristics and Identification of Partial Discharge for Insulation Structures in High Voltage IGBT Modules Under Positive Square Wave Voltage

Analysis And Evaluation Of A High-Voltage Ac Amplifier For Electrostatic Suspension

Development of the Instrument for Testing Active Device's Voltage-Current Characteristic

Influence on Measuring Ionization Chamber's Time Response Speed with Charge Integration Amplifying Circuit

Analytical Prediction of the Thermal Behavior of Semiconductor Power Devices from Room-Temperature I–V Measurements

Wideband Linear Power Amplifier for High-Frequency Ultrasonic Coded Excitation Imaging

Development of a High-Power Testing System for Piezoelectric Ceramic Material

Performance of a High-Voltage DC Amplifier for Electrostatic Levitation Applications

System for On-line Measuring Electric Field on Insulator Surface Based on Kerr Effect

A Simple and Universal Measurement Method for the Efficiency of Pulsed RF Power Amplifiers.