Abstract:Advances in Structural Engineering, Ahead of Print. To investigate the fatigue reliability of reinforced concrete (RC) bridges under stochastic traffic loading and the effectiveness of limiting the truck load, this study presented an analysis method for evaluating the bridge fatigue reliability under the action of random traffic flows based on truck weight limits. Firstly, a simply RC T-beam bridge was selected as an example to illustrate the presented approach, and the traffic-induced stress spectrum of the tensile rebars in the critical girder of the bridge was obtained. Secondly, based on the collected traffic data from two specific areas, the corresponding random traffic flow was simulated respectively, and then calibrated using the weight limit referring to the current regulation and overload violation rates (VR) to exclude overweight trucks. Finally, based on the S–N curve from Eurocode 3 and Miner's cumulative damage model, the effects of violation rate, average daily truck traffic (ADTT) and truck weight limit (TWL) on the fatigue reliability index of the bridge were studied. The results show that heavy duty trucks will induce serious cumulative fatigue damage, and degrade the durability of RC bridges, while limiting the truck weight can obviously slow down the reduction of the fatigue reliability index. Both the ADTT and the VR can significantly affect the fatigue reliability of the bridge. More specifically, the bridge fatigue reliability index shows a clear downward trend with the increase in the ADTT and the VR. Furthermore, the performance to satisfy the target fatigue reliability of the bridge was compared between TWL for each type of trucks and unified TWL for all the trucks, and then the unified TWL for all the trucks are determined to ensure the target reliability index of the RC bridge after 100 years' service life.

Study on Standard Fatigue Vehicle Load Model

Site-Specific Fatigue Load Spectrum for Urban Bridges

Bridge Vehicle Load Model on Different Grades of Roads in China Based on Weigh-in-Motion (WIM) Data

Statistical Analysis of Site-specific Traffic Load Using Weigh-in-Motion Data

Fatigue Performance Assessment of Composite Arch Bridge Suspenders Based on Actual Vehicle Loads

General Reduced Vehicle Model for Simulating Truck-Bridge Pier Collisions

Fatigue load model of orthotropic steel deck for port highway in China

Measurement-Based Vehicle Load Model for Urban Expressway Bridges

Reduced Models for Simulating Collisions Between Trucks and Bridge Piers

Vibration-Induced Probabilistic Fatigue Life Assessment of A Suspension Bridge Carrying Both Railway and Highway Traffic

ANN and LEFM-Based Fatigue Reliability Analysis and Truck Weight Limits of Steel Bridges after Crack Detection

Monitoring-Based Fatigue Reliability Assessment of Steel Bridges: Analytical Model and Application

Fatigue Damage Analysis on Existing Reinforced Concrete Bridge under Overloading

Vehicle survey and local fatigue analysis of a highway bridge

Incorporating Site-Specific Weigh-in-motion Data into Fatigue Life Assessment of Expansion Joints under Dynamic Vehicle Load

WIM-based vehicle load models for urban highway bridge

Fatigue Performance Evaluation for an Orthotropic Steel Bridge Deck Based on Field Hotspot Stress Measurements

Probabilistic fatigue life assessment of bridge welded joints considering steel corrosion

Vehicle models for fatigue loading on steel box-girder bridges based on weigh-in-motion data

Fatigue reliability assessment of welded joints in steel bridges considering multiple effects

Fatigue reliability evaluation of reinforced concrete bridges under stochastic traffic loading based on truck weight limits