Abstract:This work increases our understanding of the effect of plant source on the mechanical and morphological properties of lignin-based polyurethanes (PUs). Lignin is a polymer that is synthesized inside the plant cell wall and can be used as a polyol to synthesize PUs. The specific aromatic structure of the lignin is heavily reliant on the plant source from which it is extracted. These results show that the mechanical properties of lignin-based PUs differ based on lignin’s plant source. The morphology of lignin-based PUs was examined using atomic force microscopy and scanning electron microscopy and the mechanical properties of lignin-based PU samples were measured using dynamic mechanical analysis and shore hardness (Type A). The thermal analysis and morphology studies demonstrate that all PUs prepared form a multiphase morphology. In these PUs, better mixing was observed in the wheat straw lignin PU samples leading to higher moduli than in the hardwood lignin and softwood lignin PUs whose morphology was dominated by larger aggregates. Independent of the type of the lignin used, increasing the fraction of lignin increased the rigidity of PU. Among the different types of lignin studied, PU with wheat straw soda lignin exhibited storage moduli ~2-fold higher than those of PUs incorporating other lignins. This study also showed that during synthesis all hydroxyl groups in the lignin are not available to react with isocyanates, which alters the number of cross-links formed within the PU and impacts the mechanical properties of the material.

Study On Effects Of Isocyanate Index And Plasticizer On Lignin-Based Polyurethane

Modification of Oxygen Alkaline Wheat Straw Lignin and Its Application in Polyurethane Synthesis

Synthesis of Polyurethane by Use of Wheat Straw Oxygen-Alkaline Lignin and its Properties

Characteristics of oxygen-alkali lignin and its application in synthesis of polyurethane

The Effect of Plant Source on the Properties of Lignin-Based Polyurethanes

Optimization of Synthetic Conditions for Lignin-based Polyurethane Film

Preparations and Properties of Polyurethane Adhesives Modified by Corn Straw Lignin

Preparation and Characterization of Lignin-based Polyurethane Prepolymer

Synthesis and Properties of Lignin-Based Polyurethane Hydrogels

Performance characterization of rigid polyurethane foam with refined alkali lignin and modified alkali lignin

Lignin‐Based Polyurethane: Recent Advances and Future Perspectives

Study on Properties of Polyether and Polyester Polyurethane Elastomer

Fractionated lignin as a polyol in polyurethane fabrication

The Use of Lignin As Cross-linker for Polyurethane Foam for Potential Application in Adsorbing Materials

Modification of Renewable Resources-Lignin-by Three Chemical Methods and Its Applications to Polyurethane Foams

Synthetic Conditions and Performance of Lignin Based Polyurethane Film

Highly Resilient Lignin-Containing Polyurethane Foam

Study on Synthesis and Property of Waterborne Polyurethane Based on Polycarbonate Diol

Effect of Lignin Derivatives in the Bio-Polyols from Microwave Liquefied Bamboo on the Properties of Polyurethane Foams

Research Development of Lignin Chemical Modification and Its Application on the Synthesis of Polyurethane

Effects of Lignin-Derived Polycarboxylic Acids on the Properties of Waterborne Polyurethane Elastomers