Abstract:The C=C double bonds in the main chain of hydroxyl-terminated polybutadiene (DHTPB), obtained by the degradation of polybutadiene rubber, were partially epoxided using m-chloroperoxybenzoic acid (mCPBA) as epoxidation reagent. A series of epoxided HTPBs (EHTPB) with different epoxy contents (5%, 10% and 15%) were prepared by tuning the molar ratio of mCPBA to C=C double bonds. The structures of EHTPBs were characterized by Fourier transform-infrared (FTIR), nuclear magnetic resonance (H-1-NMR) spectroscopy and gel permeation chromatography (GPC). The epoxy percent in EHTPBs from H-1-NMR spectra was in accordance with the design. In addition, a series of EHTPB-based polyurethane elastomers (EPU) were prepared by the reaction between EHTPB and 4,4'-diphenylmethane diisocyanate with 1,4-butanediol as a chain extender. Mechanical and thermal properties of the EPU samples were characterized by tensile test, differential scanning calorimetry (DSC) and thermal gravity analysis (TGA). With increased epoxy percent in EHTPB, the Young's modulus and the tensile strength of the EPU samples increased, whereas the elongation at break decreased. The sample EPU10 prepared with 10% of epoxy had the best mechanical properties with 8.82 MPa as Young's modulus, 7.83 MPa as tensile strength, and (485 +/- 23)% as elongation at break. The elasticity recovery of the EPU sample was slightly better than HTPB-based PU (EPU0). The results with TGA test showed that the thermal degradation of EPU, similar to EPU0, was divided into three stages. However, the EPU samples had better thermal stability with the initial degradation temperature at 210 degrees C, about 30 degrees C higher than that of EPU0. The DSC results showed that the glass transition temperature (T-g) of EPU gradually increased as epoxy percent was increased, though still lower than that of HTPB (FHTPB) based PUs prepared by free-radical polymerization.

Study on Properties of Polyether and Polyester Polyurethane Elastomer

Preparation and Properties of Epoxided Hydroxyl-terminated Polybutadiene Based Polyurethane Elastomers

Effect of soft segment structure on properties of polyurethane elastomers

Effect of Hard and Soft Segment on Structure-Property of Thermoplastic Polyurethane Elastomer

Mechanical Property Study on Lightly Crosslinked Thermoplastic Polyurethane Elastomers

Preparation and Properties of Mdi-Based Polyester Polyurethane Elastomer

聚酯型聚氨酯弹性体的合成及性能研究 Synthesis and Performance Research of Polyester Polyurethane Elastomers

Study on Properties and Preparation of Thermoplastic Polyurethane Hot-Melt Adhesive

Design and Performance of Polyurethane Elastomers Composed with Different Soft Segments

Research on polyurethane elastomer to improve heat resistance

Morphology and Properties of Novel Thermoplastic Polyurethane Elastomer

Synthesis and Characterization of XDI-based Thermoplastic Polyether Polyurehtane Elastomers

Morphology and Properties of Thermoplastic Polyether Polyurethane Based on IPDI

Synthesis and Properties of IPDI-Based TPU and HMDI-Based TPU

Study on Mechanical Properties of Polyurethane Cross-Linked P(E-co-T)/PEG Blended Polyether Elastomer

Synthesis and Properties of Cast PU Elastomers with Molecularly Uniform Hard Segments Based on TDI and DMTDA

Effects of Polyether and Polyester Polyols on the Hydrophobicity and Surface Properties of Polyurethane/Polysiloxane Elastomers

Morphology and properties of high molecular weight polyisobutylene and thermoplastic polyurethane elastomer

Macro Properties of Polyurethane Elastomers Based on Different Polyols

Synthesis and Properties of Non-Isocyanate Aliphatic Thermoplastic Polyurethane Elastomers with Polycaprolactone Soft Segments

Study on POM Modification by Thermoplastic Polyurethane Elastomer