Abstract:The gradation and mechanical properties of aggregates impressively affect the load carrying capacity and rutting resistance of asphalt mixtures. They are able to provide some fundamental parameters that are linked to mixture performance. In order to accurately detect critical controlled sizes and obtain more fundamental parameters that can characterize load carrying capacity and rutting resistance of asphalt mixtures, this paper aims to develop a mechanics-based approach to evaluate aggregate gradation, which contains the theoretical packing analysis and discrete element simulation. An extended theoretical morphology framework is developed by checking the local and global interlock of graded aggregates in the theoretical packing analysis. The sieve size range of primary structure which has an interactive interlock can be determined in the local interlock check model. The relationship between the transferred force and the induced force is proposed in the densest and loosest packing arrangements, respectively. The morphological parameters of disruption factor and weighted average size for the global scale are also proposed in theoretical packing analysis. Then the discrete element method is used to validate the theoretical framework. The advanced gradation input algorithm procedure is established in the discrete element simulation to simulate the compression test of graded aggregates. The mechanical parameters of contact force, contact points and stress-strain curves are extracted from the simulation results. The results show that the discrete element method can validate the theoretical framework and output the performance related parameters. The contact force analysis shows that the aggregates retaining on sieve sizes of 2.36 and 4.75 mm provide more than 50% contribution to resist load, and the aggregates retaining on sieve sizes of 1.18, 0.6 and 0.3 mm provide more than 50% contribution to stabilize the structure. The coordination number analysis suggests that the gradation with more fine aggregates might lead to a greater number of voids but smaller air-void size when the asphalt content and porosity remain constant. The stress-strain curve analysis shows that the modulus and secondary strain are highly related to the rutting performance of an asphalt mixture. (C) 2019 Elsevier Ltd. All rights reserved.

Quantitative Characterization Of The Roughness Of Four Artificially Prepared Gravel Surfaces

Statistical Significance of Spatial Correlation Patterns in Armoured Gravel Beds

Influence of particle shape on surface roughness: Dissimilar morphological structures formed by man-made and natural gravels

Scaling Behavior of Gravel Surfaces

The Modelling and Simulation of a Rough Surface

Mechanical Evaluation of Aggregate Gradation to Characterize Load Carrying Capacity and Rutting Resistance of Asphalt Mixtures

Characterization of the surface roughness of sand particles using an advanced fractal approach

SIMULATION AND CHARACTERIZATION OF FRACTAL ROUGH SURFACES

Fractal Characterization on Anisotropy and Fractal Reconstruction of Rough Surface of Granite Under Orthogonal Shear

Grain size of gravel: recent progress on sampling, analysis and calculation

Characterization of Irregularly Micro-Structured Surfaces Related to Their Wetting Properties

3D Morphology Distribution Characteristics and Discrete Element Simulation of Sand-Gravel Mixtures

Three-dimensional characterization method of pile–rock interface roughness based on fractal geometry

Quantitative Characterization of Solute Transport in Fractures with Different Surface Roughness Based on Ten Barton Profiles

Quantitative Characterisation of Surface Texture

Analysis of granular mechanical parameters characteristics in graded gravel triaxial test

Rough Correlations: Meta‐Analysis of Roughness Measures in Gravel Bed Rivers

3D Voxel-Based Approach to Quantify Aggregate Angularity and Surface Texture

Investigation of the compaction behaviour of sand-gravel mixtures via DEM: Effect of the sand particle shape under vibration loading

Quantitative Characterization of Surface Topography Using an Improved Deterministic Method

A New Numerical Simulation Method for 3D Rough Surface Topography of Shot Peening Parts with Specified 3D Roughness Spatial Parameters