Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. After pneumatic shot peening, compressive residual stress is induced on the surface of the target, which will improve the fatigue life. During the process, surface roughness is also induced, which may reduce the fatigue life. To achieve the optimum compressive residual stress with the smallest surface roughness, the formation mechanism of the residual stress field and the surface topography are revealed. Then, pneumatic shot peening is simulated by using a discrete element method–finite element method coupled model. Based on the effects of four variables (the incident angle θ, the initial shot velocity v0, the shot radius R) and the mass flow rate rm on five parameters (the equivalent plastic strain, the equivalent stress, the surface compressive residual stress, the maximum compressive residual stress), the surface roughness is investigated. The results show that it induces a residual elastic–plastic strain after the impact of a single shot, which can form a crater and a hemispherical residual stress field. After the impact of many random shots, scattered craters connect with each other, therewith a rough and continuous surface topography is formed. Scattered residual stress fields couple with each other, and a constant residual stress layer with the compressive residual stress in the surface and the tensile residual stress in the subsurface are formed. All five parameters are determined by the residual elastic–plastic strain, which increases as the augment of the normal impact velocity, the shot mass, and the coverage rate. Along with the increase of θ and rm, these five parameters firstly increase and then decrease; with the increase of v0 and R, these five parameters increase. Therefore, reasonable values of θ, v0, R, and rm should be chosen to obtain the optimum compressive residual stress with as small surface roughness as possible.

A New Numerical Simulation Method for 3D Rough Surface Topography of Shot Peening Parts with Specified 3D Roughness Spatial Parameters

A Study on 3D Micro-Topographical Measurement of FRCMC Grinding Surface

Accurate superposition modeling method of grinding-shot peening surfaces

Numerical Simulation and Experimental Validation of Fixed Abrasive Grinding Pad Topography

A numerical method for generation of shot peened surfaces

An evaluation on SP surface property by means of combined FEM-DEM shot dynamics simulation

A simulation modeling methodology considering random multiple shots for shot peening process

A Simulation Method for Non-Gaussian Rough Surfaces Using Fast Fourier Transform and Translation Process Theory

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

A Novel Simulation Method of Micro-Topography for Grinding Surface.

Numerical modeling of ultrasonic shot peening with an accurate impact velocity

A theoretical model for predicting the surface topography of inhomogeneous materials after shot peening

The Modelling and Simulation of a Rough Surface

A Novel Method of Designing Random Rough Surface Considering Its Contact Force–Deformation Characteristic Requirement

Modelling and experimental study of surface treatment in abrasive waterjet peening of Nickel-based superalloy: Inverse problem

3D bevel surface topography analysis and roughness prediction by considering the cutter-workpiece dynamic interaction

Study on a probabilistic algorithm for the forming and 3D characterization of special-shaped surfaces under profile grinding

A High Precision Modeling Technology of Material Surface Microtopography and Its Influence on Interface Mechanical Properties

Studies on residual stress and surface topography after pneumatic shot peening using discrete element method–finite element method coupled model

Real-time surface roughness estimation and automatic regrinding of ground workpieces using a data-driven model and grinding force inputs

Modified Method for Surface Probabilistic Risk Assessment of Aero Engine Compressor Disks Considering Shot Peening