Abstract:In the high-speed milling of titanium alloys, the combined application of surface texture and coatings can significantly enhance the performance of cemented carbide tools. Investigating the synergistic effect of surface texture and AlSiTiN coating on tool performance is crucial for advancing the development of their integrated preparation process. Therefore, in this study, a cemented carbide ball-end milling cutter is taken as the research object, and a surface-textured AlSiTiN coating is applied to the rake face. The effects of texture and coating parameters on the milling performance of titanium alloys are analyzed, and a regression model is developed to optimize the relevant parameters. The results indicate that the surface texture effectively reduces the actual contact area between the tool and the chip, serves as a storage space for chips, and enhances the wear resistance of the AlSiTiN coating. The coating thickness significantly affects milling force, milling temperature, and surface wear. An increase in coating thickness improves the hardness and integrity of the coating surface, and it also strengthens the adhesion of the texture to the coating. Additionally, precise control of the laser power plays a key role in reducing the milling temperature, while both the number of scans and the scanning speed significantly influence surface wear. Furthermore, maintaining an appropriate distance from the edge is crucial for enhancing the surface roughness of the workpiece. The optimized parameters for surface texture and coating preparation are as follows: coating thickness (h) = 3.0 μm, laser power (p) = 40 W, scanning speed (v) = 1590 μm/min, number of scans (n) = 6, texture diameter (d) = 42 μm, texture spacing (l) = 143 μm, and distance from the edge (l1) = 104 μm. The optimized milling performance of the milling cutter shows a significant improvement.

Anti-Friction and Anti-Wear Mechanisms of Micro Textures and Optimal Area Proportion in the End Milling of Ti6Al4V Alloy

Tool Wear in Disk Milling Grooving of Titanium Alloy

Wear optimization of titanium alloy cutter milled with microtextured ball-end milling cutter

Improving the Performance of Micro-Textured Cutting Tools in Dry Milling of Ti-6Al-4V Alloys

Research on the Milling Performance of Micro-Groove Ball End Mills for Titanium Alloys

Tool Wear Mechanisms in Axial Ultrasonic Vibration Assisted Milling In-Situ TiB2/7050Al Metal Matrix Composites

Optimizing the micro-texture and cutting parameters of ball-end milling cutters to achieve milling stability

Study on the Properties of Sinusoidal Micro-Textured Ball End Milling Cutter for Milling Titanium Alloy

Study on force-thermal characteristics of ball end milling cutter with chamfered edge and micro-textured flank face

Support vector regression and genetic-algorithm-based multiobjective optimization of mesoscopic geometric characteristic parameters of ball-end milling tool

Study on milling behavior of TiAlN coated tool with variable distribution density micro-texture

Micro-texture design criteria for cemented carbide ball-end milling cutters

Performance of carbide tools with micro-texture on titanium alloys cutting in dry conditions

A Simulation Study on the Effect of Micro-Textured Tools During Orthogonal Cutting of Titanium Alloy Ti-6Al-4V

Experimental Study on the Optimization of Ti1023 Milling Parameters

Analysis of Surface Characteristics of Titanium Alloy Milling with Ball-End Milling Cutters Based on Mesoscopic Geometric Features

Study on Mechanical Properties of Titanium Alloy with Micro-Texture Ball-End Milling Cutter under Different Cutting Edges

Effects of tool coating and tool wear on the surface and chip morphology in side milling of Ti2AlNb intermetallic alloys

Effect of Surface-Textured AlSiTiN Coating Parameters on the Performance of Ball-End Milling Cutter in Titanium Alloy Milling

Cutting Performance of Different Coated Micro End Mills in Machining of Ti-6Al-4V

Experimental Investigation on Tool Wear Characteristics of PVD and CVD Coatings During Face Milling of Ti6242S and Ti-555 Titanium Alloys