Abstract:Fatigue as a mechanical process of material degradation is the result of microstructural evolution and damage accumulation under fluctuating loading conditions. The progressive deterioration of material strength in fatigue can be regulated by chemistry, temperature and pressure of the environment. The notion of environmentally-assisted fatigue (EAF) is closely related to engineering problems such as stress corrosion cracking (SCC), hydrogen embrittlement (HE), and corrosion fatigue (CF). The integration of environmental effects into the initiation and propagation of fatigue cracks introduces interplay between deformation, failure of materials and transport, reaction of chemical species. The whole process is usually very complex and sensitive to the materials and environment. Exploring the process of EAF at small scale allows to identify the key physical processes by excluding the microstructural and environmental complexities of materials. On the other hand, EAF was also shown to be a detrimental process for the micro- and nanostructures, where the environmental effects become even more significant for the reduced dimension and large surface-to-volume ratios. The presentation will be focused on the general principles that improve the understanding and prediction of material behaviors under environmental attacks. Section “Physics of Environmentally-Assisted Fatigue” outlines the fundamentals of fatigue and the environmental effects, which lays the ground for following discussions. Section “Techniques and Methods” introduces the experimental and simulation techniques that are used to resolve the complexity of EAF at small scales. Section “Environmentally-Assisted Fatigue at Small Scales” summarizes the state-of-the-art knowledge of EAF at small scale, followed by a list of perspectives in Section “Summary and Outlook”.

Environment-Assisted Fatigue Crack Growth Along A1-6061/Epoxy Interface

Environment-induced Fatigue Cracking Behavior of Aluminum Alloys and Modification Methods

Environmentally-assisted Fatigue Crack Growth in AA7050-T73511 Al Alloy and AA2050-T84 Al-Cu-Li Alloy

Fatigue damage evolution and failure of pre‐corroded aluminum alloy 7075‐T651 under air and corrosion environments

Relationship between electrochemical processes and environment-assisted crack growth under static and dynamic atmospheric conditions

Environmentally Assisted Fatigue Behavior of 308L Weld Metal in Borated and Lithiated High-Temperature Water

Fatigue crack growth behavior of aerospace and ship-grade aluminum repaired with composite patches in a corrosive environment

Propagation of corrosion induced fatigue crack in aluminum alloy

Environmentally-Assisted Fatigue at Small Scales

Impact of alternating corrosion and fatigue on the fatigue life of a 7475-T7351 aluminum alloy in an aircraft beam structure

Synergistic Effect of Environmental Media and Stress on the Fatigue Fracture Behaviour of Aluminium Alloys

Effect of environmental media on the growth rate of fatigue crack in TC4 titanium alloy: Seawater and air

Short Surface Crack Growth of High-Strength Aluminum Alloy in Corrosion Fatigue.

Environment assisted cracking of 308L weld metal in high temperature water

Corrosion Fatigue Behavior of Fastening Hole Structure and Virtual Crack Propagation Tests

Small fatigue crack propagation in Al-Cu alloy laminated structure via ultrasonic consolidation

The effect of variable humidity on corrosion fatigue of AA7085-T7451 with surface salt deposits

In-situ scanning electron microscopy studies of small fatigue crack growth in ultrasonic consolidation bonded aluminum 2024 laminated structure

Investigation on Corrosion Fatigue Crack Growth Rate in 7075 Aluminum Alloy

STUDY OF INTERACTION BETWEEN LOADS DURING CORROSION FATIGUE

FATIGUE BEHAVIOR OF ROLLED AZ31B MAGNESIUM ALLOY IN AIR AND NaCl SOLUTION