Abstract:Accurate prediction of fatigue performance and life is a key issue in the design and applications of the high strength-to-weight ratio of many contemporary magnesium alloys, which are suitable for ultimate weight reduction purposes in automotive and aircraft components. For example, the ever increasing demands for higher efficiency and light weight typical cases of power generation, aerospace and automotive industries call the maximum exploitation of the material’s properties. The combination of low density (about 1.74 g/ cm3), high specific strength and excellent castability qualifies magnesium alloys as ideal materials for the lightweight constructions [1]. Thus, purely empirical models that heavily rely on larger safety factors are of limited uses. It is now widely recognized that fatigue damage models that are closely related to the microstructural features to provide a more reliable basis for a life prediction, provided that the relevant microstructural damage mechanisms are accurately accounted for. Therefore, there are increasing interests in the fatigue tests combined with the high-resolution microscopic techniques, environmental influencing factors, and especially in understanding their fatigue crack initiation and propagation behaviors with process rationalization [2-4]. Subsequently experimental observations on cast magnesium alloys have accumulatively revealed that the dendrite cell size, pores, secondary phase particles, persistent slip bands and twinning in the dendrite cells considerably affect on the fatigue durability and fatigue cracking behavior or crack growth mechanism of dendritic magnesium alloys [5-8]. The quantitative estimation of small fatigue crack growth rate of cast magnesium alloys is whether simply and effectively to assist the reversed design of cast magnesium alloys or ceaselessly to improve the strength and toughness of cast magnesium alloys. At the same time, it is necessary how to understand that these microstructural features of cast magnesium alloys play role in the fatigue cracking behavior or that the microstructural evolution reacts to the applied loadings. However, it is difficult to use conventional alloying techniques to improve some of their properties, e.g. elastic modulus, elastic-plastic deforming property and the different thermal expansion between phases during the shrinking at the high elevated temperatures. Under these conditions the elastic, and the possible plastic, properties of the secondary phase will influence the mechanical response during an applied loading since the interface of secondary phase will transmit stresses from the matrix around the secondary phase when the interface both the matrix and secondary phase has a compatible strain field. If the elastic

FATIGUE BEHAVIOR OF ROLLED AZ31B MAGNESIUM ALLOY IN AIR AND NaCl SOLUTION

Investigation on corrosion fatigue properties of TA15 alloy in 3.5%NaCl salt spray

Corrosion Fatigue Behavior of the High-Strength Magnesium Alloy AZ 80

Failure Behavior of High Pressure Die Casting AZ91D Magnesium Alloy

Environment-induced Fatigue Cracking Behavior of Aluminum Alloys and Modification Methods

Influence of load frequency and corrosive environments on fatigue behavior of as-extruded Mg–Zn–Zr–Nd alloy

Environment-Assisted Fatigue Crack Growth Along A1-6061/Epoxy Interface

Low-cycle Fatigue Small Crack Initiation and Propagation Behaviour of Cast Magnesium Alloys Based on In-Situ SEM Observations

The Effects of Corrosive Media on Fatigue Performance of Structural Aluminum Alloys

A Study on the Corrosion Fatigue Characteristics of Al 2024-T3 Alloy

Synergistic Effect of Environmental Media and Stress on the Fatigue Fracture Behaviour of Aluminium Alloys

Quantitative assessment of the microstructural factors controlling the fatigue crack initiation mechanisms in AZ31 Mg alloy

Effect of Fatigue and Precorrosion Fatigue on Fatigue Crack Propagation and Fracture Failure Behavior of 5B70 Aluminum Alloy

The Microstructure and Fatigue Initiation of an AA2524-T34 Aluminum Alloy

In-situ Observation Technology and Application of Fatigue Crack Initiation and Propagation for Cast Magnesium Alloys

Fatigue Cracking Behaviors and Influence Factors of Cast Magnesium Alloys

The role of recrystallization on fatigue crack propagation of a high alloying Al-Zn-Mg-Cu alloy

Corrosion fatigue crack propagation of 7XXX series aluminum alloys from key components of high-speed train

Corrosion Fatigue Behavior of Fastening Hole Structure and Virtual Crack Propagation Tests

Investigation of Surface Fatigue Microcrack Growth Behavior of Cast Mg–Al Alloy

STUDY OF CORROSION FATIGUE FOR LY12CZ ALUMINUM ALLOY RIVETED LAP-SPLICE JOINTS