Influence of Scandium on Corrosion Properties and Electrochemical Behaviour of Mg Alloys in Different Media

Ning Ma,Qiuming Peng,Xuejun Li,Hui Li,Jinghuai Zhang,Yongjun Tian

DOI: https://doi.org/10.1016/s1452-3981(23)17973-9

IF: 1.541

2012-01-01

International Journal of Electrochemical Science

Abstract:Corrosion behaviour of Mg-xSc (x=0, 3, 5, wt.%) alloys prepared by zone purifying solidification technique has been investigated by immersion test and electrochemical measurement in both 0.9 wt.% NaCl solution and simulated body fluid. The results of immersion test show the corrosion resistance of Mg-3wt.%Sc alloy in both conditions is much higher than that of pure Mg or Mg-5wt.%Sc alloy. Moreover, the released hydrogen gas per day of Mg-3wt.%Sc alloy is equivalent, which indicates that the corrosion process is homogeneous. Compared with pure Mg and Mg-5wt.%Sc alloy, the oxide film is more uniform and compact. The oxide film includes Mg(OH)(2) and the sediment of Ca (H2PO4)(2) in simulated body fluid. The potentiodynamic polarization curves show that a current plateaus is only observed in Mg-3wt.%Sc alloy due to the stable protective corrosion film. The electrochemical impendence spectroscopy curves of Mg-3wt.%Sc alloy are mostly composed of two capacitive loops in high and low frequency regions because of the existence of stable double-layer capacitance controlled by diffusion. It is demonstrated that the improved corrosion properties of Mg-3wt.%Sc alloy are essentially attributed to the reduction of the cores of pitting corrosion.