Abstract:The precise evaluation of the potential damage caused by large commercial aircraft crash into civil structures, especially nuclear power plants (NPPs), has become essential design consideration. In this study, impact of Boeing 767 against rigid wall and outer containment building (reinforced concrete) of an NPP are simulated in ANSYS/LS-DYNA by using both force time history and missile target interaction methods with impact velocities ranging from 100 m/s to 150 m/s. The results show that impact loads, displacements, stresses for concrete and steel reinforcement, and damaged elements are higher in case of force time history method than missile target interaction method, making the former relatively conservative. It is observed that no perforation or scabbing takes place in case of 100 m/s impact speed, thus preventing any potential leakage. With full mass of Boeing 767 and impact velocity slightly above 100 m/s, the outer containment building can prevent local failure modes. At impact velocity higher than 120 m/s, scabbing and perforations are dominant. This concludes that in design and assessment of NPP structures against aircraft loadings, sufficient thickness or consideration of steel plates are essential to account for local failure modes and overall structural integrity. Furthermore, validation and application of detail 3D finite element and material models to full-scale impact analysis have been carried out to expand the existing database. In rigid wall impact analysis, the impact forces and impulses from FE analysis and Riera's method correspond well, which satisfies the recommendations of relevant standards and further ensure the accuracy of results in full-scale impact analysis. The methodology presented in this paper is extremely effective in simulating structural evaluation of full-scale aircraft impact on important facilities such as NPPs.

Analytical Research on Impacting Load of Aircraft Crashing Upon Moveable Concrete Target

Experimental and Numerical Study on the Behavior of Circular RC Columns under Impact Loading

Research of Loading Effects of Blast in Air

Numerical Analyses of a Shield Building Subjected to a Large Commercial Aircraft Impact

Finite Element Analyses on the Soft Projectile Impact Testing of a Wall-floor-wall Reinforced Concrete Structure

Optimization analysis of state equation and failure criterion for concrete slab subjected to impact loading

An aircraft accident reconstruction by numerical simulation method and investigations of impact force

Aircraft impact analysis of nuclear safety-related concrete structures: A review

Comparative assessment of impact analysis methods applied to large commercial aircraft crash on reinforced concrete containment

An Integral Numerical Analysis of Impact of a Commercial Aircraft on Nuclear Containment

A STUDY FOR EVALUATING LOCAL DAMAGE TO REINFORCED CONCRETE PANELS SUBJECTED TO OBLIQUE IMPACT PART 2: SIMULATION ANALYSIS OF THE EXPERIMENTAL RESULTS OF LOCAL DAMAGE CAUSED BY IMPACT OF DEFORMABLE PROJECTILES

Analytical Study of Perforation Damage in Reinforced Concrete Slabs Subjected to Oblique Impact by Projectiles with Different Nose Shapes

Analysis of impact force of large commercial aircraft on rigid wall and nuclear power plant containment

Dynamic Analysis of Reactor Containment Subjected to Aircraft Impact Loading

The Shock and Impacting Load Simulation of the Nuclear Power Plant Crashed by the Aircraft

A STUDY FOR EVALUATING LOCAL DAMAGE TO RC PANELS SUBJECTED TO OBLIQUE IMPACT. PART 1: A STUDY FOR EVALUATING LOCAL DAMAGE CAUSED BY OBLIQUE IMPACT OF RIGID PROJECTILES

Numerical Study of CFRP-Bonded Pressure Pipes Subject to Impact Load

Impact Simulations on Local Damage of Reinforced Concrete Panel Influenced by Projectile Nose Shape

Numerical study on craters and penetration of concrete slab by ogive-nose steel projectile

A systematic approach to aircraft crashworthiness and impact surface material models

Numerical Analysis of Deformation and Failure of Penetration into Concrete Target by Projectile