Abstract:The characteristics of electrical treeing in ice-water quenched high-density polyethylene (HDPE) film under AC voltage of different frequency ranging from 50 Hz to 90 kHz was studied. The electrical treeing experiments are carried out at room-temperature. The processes of electrical treeing during the experiment are observed via a digital micro-observing system. It was found that under different frequency of applied voltage the initiation shape of electrical tree was different, it means the different mechanisms of electrical tree initiation. There are 4 kinds of trees in inception period: branch tree, trunk tree, bush tree and breakdown tree. Trunk tree and breakdown tree with high initiation speeds are special kinds appearing in high frequency (HF). The branch tree is the primary shape in the range of low frequency, while the bush tree is the primary shape in the range of HF. With the increase of frequency, the occurrence ratio of branch tree decreases, while the occurrence ratio of bush tree increases. It was also shown that as the propagation of electrical tree, the conversion of tree shape is strongly affected by the frequency. The electrical tree usually has a simple shape and rarely changes under low frequency in one hour or more. However, in the case of a higher frequency, the electrical tree shape changes more frequently and has a large probability to breakdown. The result also showed that there were 4 steps in the electrical tree propagating process: initiation step, stagnation step, growth step and breakdown step. Under the same voltage, high frequency could accelerate the electrical tree propagation. Higher frequency could speed up the tree growing and increase the probability of breakdown caused by electrical tree. The influence of frequency on material polarization process, fatigue and thermo effect were considered as the main causes of the experiment results. The more serious destruction caused by high frequency electrical treeing degradation can well explain the reason of insulation premature inactivation in mid-frequency or high-frequency electrical equipment.

Annealing Effects on the Tree Initiation Voltage of Polyethylene at High Temperature

Annealing effect on the morphology of polyethylene materials and the tree initiation voltage

Electrical Treeing Behavior of DC and Thermally Aged Polyethylenes Utilizing Wire-Plane Electrode Geometries

The Effect of DC Electro-thermal Ageing on Electrical Treeing in Polyethylene

Electrical treeing behavior at high temperature in XLPE cable insulation samples

AC and DC Pre-Stressed Electrical Trees in LDPE and Its Aluminum Oxide Nanocomposites

Trees in 110 kV XLPE cable insulation at high temperature

Annealing Effect on DC Conduction in Polyethylene Films

Effects of Annealing on the Hierarchical Crystalline Structures and Mechanical Properties of Injection‐molded Bars of High‐density Polyethylene

Morphology Change and Tree Initiation of Polyethylene

Annealing of melt-crystallized polyethylene and its influence on microstructure and mechanical properties: A comparative study on branched and linear polyethylenes

Annealing behavior of gel-spun polyethylene fibers at temperatures lower than needed for significant shrinkage

Investigation on Tree Initiation in Polyethylene Films Exposed to Thermo-oxidation

Effects of Crystallinity on the Space Charge Properties of Polyethylene

Annealing Effects on Space Charge Properties of LDPE

Electrical Treeing Initiation In Polypropylene Under Low Temperature With Different Power Frequencies

Thermorheology and crystallization behaviors of polyethylenes: Effect of molecular attributes

Studies on the Free-Volume Change in Annealed Ultra-High Molecular Weight Polyethylene by the Positron Annihilation Technique

Dependence of Electrical Treeing Behavior on Cross-Linking Temperature of Xlpe

Effect of Frequency on Electrical Treeing Characteristicsof High-density Polyethylene