Abstract:This paper presents an in-situ measurement method to accurately characterize the winding loss in high-frequency (HF) transformers, which is challenging to quantify in power electronics applications. This approach adapts the reactive voltage cancellation concept to measure the complete winding loss in HF transformers with the presence of the magnetic core and the load on the secondary side, while this concept was originally brought up for core loss measurement. As an in-situ method, the proposed testing method can factor in the non-linear winding loss elements impacted by the magnetic field interaction between the windings and the core under the large-signal operation, which are not properly assessed in existing approaches. The presented method significantly reduces the sensitivity of the measurement errors linked to the probe phase discrepancy, since the resistive winding loss is well separated out from the core loss. The acquired experimental results are compared and verified with other common empirical measurement methods and three-dimensional (3D) finite element analysis (FEA). As the finding, the measured winding AC resistance is found to be correlated with the load level. Furthermore, treating the complex winding loss and core loss as a black-box problem, this paper proposes a total loss map as an engineering solution to practically distribute the measured loss data of magnetic components to the end-users to enable quick and accurate loss estimationmodelling.

Measurement of Proximity Losses in Litz Wires

Direct Measurements of Propagation Losses in Silver Nanowires

A Loss Measurement Approach of Power Magnetic Components under Practical Power Electronics Conditions

Inhomogeneous Winding for Loosely Coupled Transformers to Reduce Magnetic Loss

An overview of power loss calculation methods for high-frequency litz wires

Modeling and Analysis of Transmission Performance of Bonding Wire Interconnection

Litz-Wire Winding Loss Calculation Method for Optimal Design of High-Frequency Transformers

Novel broadband measurement technique on PCB cells for the field- and stress-dependent impedance in ferromagnetic wires

Litz Wire and Uninsulated Twisted Wire Assessment Using a Multilevel PEEC Method

Development of pulsed wire technology for magnetic field measurement

Noncontact measurement of complex permittivity based on the principle of mid-range wireless power transfer

Fast Simulation of Litz Wire Using Multilevel PEEC Method

LitzImp: A Fast Impedance Extraction Algorithm for Litz Wire Coil

Noncontact Measurement of Complex Permittivity of Electrically Small Samples at Microwave Frequencies

Methodology for Measurement of Submicron Metallic Wire's Local Electrical Conductivity by Applying Four-points AFM Probe Technique

Electromagnetic Characteristics of Bonding Wires in Advanced Electronic Devices Packaging

Broadband Measurements of the Surface Impedance in Ferromagnetic Wires As a Boundary Condition for Scattering Problems

The Direct Measurement Method of Magnetic Winding Losses

AC Loss Analytic Method and Optimization of Litz Winding for High-Speed Electrical Machines

Measurement Method of High-Frequency Winding Loss in Gapped Inductors Based on Magnetic Field Equivalence

In-Situ Measurement and Investigation of Winding Loss in High-Frequency Cored Transformers Under Large-Signal Condition