Abstract:The core used to build power inductors and transformers are soft magnetic materials. When there is alternating external field, the magnetic moments rotate and consume energy, which is the core loss. The core loss depends on the AC flux frequency, amplitude, waveform, DC bias and temperature. These dependences are nonlinear and difficult to predict. How to measure, model and analyze the core loss is a challenge for decades. In this dissertation, two new core loss measurement methods are introduced first. These two methods use the reactive cancellation concept to reduce the sensitivity to phase discrepancy, which will destroy the accuracy in classic two-winding method for high frequency high quality factor sample measurements. By using the new measurement techniques the accuracy can be improved by several orders. The first is for sinusoidal waveforms, and the second is for non-sinusoidal wave. The new methods enable high frequency core loss characterization capability, which will help scientists and engineers on material research and inductor/transformer design. Measurement examples, considerations and error analysis are demonstrated and discussed in detail. With the measurement techniques, the core loss under rectangular AC voltage and DC bias current are investigated. A new core loss model named rectangular extension Steinmetz equation (RESE) is proposed based on the measurement results. The new iii model is shown to be more accurate than the existing core loss models. Several commercially available MnZn ferrites are characterized and modeled. Other than conventional MnZn ferrite materials, three commercial LTCC ferrite materials are characterized for integrated power supply applications. Based on characterized properties of these LTCCs, a group of new LTCC ferrites are fabricated and tested. The new LTCC is fabricated by laminating commercial LTCC tapes and co-firing. The new LTCC is demonstrated to have over 50% more inductance over the commercial LTCC materials. This work indicates that the power electronics engineers should work with material engineers to get the optimum material for a given application. In the last part, the core loss of the partially saturated lateral flux planar inductor is analyzed. The challenge of the analysis is the complexity of the distribution of bias field and flux density in a highly biased planar inductor. Each point in the core is working at different excitation and bias condition, and the core loss density is very non-uniform. The proposed method combines the characterization tested in previous chapters and the commercial finite element tool. Experiments verified that the calculation errors are within about 10%. In conclusion, the research in this dissertation proposed a complete solution to measure, model and analyze the high frequency core loss. This solution will not only facilitate fundamental research on physics understanding and material innovation, but also development of power electronics and RF applications.

Measurement Method of High-Frequency Winding Loss in Gapped Inductors Based on Magnetic Field Equivalence

Simplified Analytical Model and Investigation of Open-Circuit AC Winding Loss of Permanent-Magnet Machines.

A Loss Measurement Approach of Power Magnetic Components under Practical Power Electronics Conditions

A Practical Approach for Core Loss Estimation of a High-Current Gapped Inductor in PWM Converters with a User-Friendly Loss Map

The Direct Measurement Method of Magnetic Winding Losses

Calculation Method of Winding Eddy-Current Losses for High-Voltage Direct Current Converter Transformers

Inhomogeneous Winding for Loosely Coupled Transformers to Reduce Magnetic Loss

In-Situ Measurement and Investigation of Winding Loss in High-Frequency Cored Transformers Under Large-Signal Condition

An accurate calculation method for inductor air gap length in high power DC–DC converters

High Frequency Magnetic Core Loss Study

A DC Differential Method for Core Loss Measurement under Sinusoidal Excitation

A novel hysteresis loss calculation method of filter inductor in PWM inverters

Analysis and Calculation of Winding Losses of High Frequency Inductors

Two-Dimensional Winding Loss Analytical Model for High-Frequency Multilayer Air-Core Planar Inductor

Evaluation of Magnetic Materials for Very High Frequency Power Applications

Analysis and Comparison for Inductor Loss of the Critical Conduction Mode Boost PFC Circuit

A Novel Estimation Model for Hysteresis Loss Based on Semi-Minor Loops

Analytical Model and Concept Study of an Air Gap Fringing Shield to Reduce Losses in Gapped Inductors

A Novel DC Differential Method for High Frequency Core Loss Measurement

Improved Calculation Method for Inductance Value of the Air-Gap Inductor