Abstract:The core used to build power inductors and transformers are soft magnetic materials. When there is alternating external field, the magnetic moments rotate and consume energy, which is the core loss. The core loss depends on the AC flux frequency, amplitude, waveform, DC bias and temperature. These dependences are nonlinear and difficult to predict. How to measure, model and analyze the core loss is a challenge for decades. In this dissertation, two new core loss measurement methods are introduced first. These two methods use the reactive cancellation concept to reduce the sensitivity to phase discrepancy, which will destroy the accuracy in classic two-winding method for high frequency high quality factor sample measurements. By using the new measurement techniques the accuracy can be improved by several orders. The first is for sinusoidal waveforms, and the second is for non-sinusoidal wave. The new methods enable high frequency core loss characterization capability, which will help scientists and engineers on material research and inductor/transformer design. Measurement examples, considerations and error analysis are demonstrated and discussed in detail. With the measurement techniques, the core loss under rectangular AC voltage and DC bias current are investigated. A new core loss model named rectangular extension Steinmetz equation (RESE) is proposed based on the measurement results. The new iii model is shown to be more accurate than the existing core loss models. Several commercially available MnZn ferrites are characterized and modeled. Other than conventional MnZn ferrite materials, three commercial LTCC ferrite materials are characterized for integrated power supply applications. Based on characterized properties of these LTCCs, a group of new LTCC ferrites are fabricated and tested. The new LTCC is fabricated by laminating commercial LTCC tapes and co-firing. The new LTCC is demonstrated to have over 50% more inductance over the commercial LTCC materials. This work indicates that the power electronics engineers should work with material engineers to get the optimum material for a given application. In the last part, the core loss of the partially saturated lateral flux planar inductor is analyzed. The challenge of the analysis is the complexity of the distribution of bias field and flux density in a highly biased planar inductor. Each point in the core is working at different excitation and bias condition, and the core loss density is very non-uniform. The proposed method combines the characterization tested in previous chapters and the commercial finite element tool. Experiments verified that the calculation errors are within about 10%. In conclusion, the research in this dissertation proposed a complete solution to measure, model and analyze the high frequency core loss. This solution will not only facilitate fundamental research on physics understanding and material innovation, but also development of power electronics and RF applications.

Analytical Model and Concept Study of an Air Gap Fringing Shield to Reduce Losses in Gapped Inductors

Analytical fringing field model for efficient winding loss calculation in gapped foil inductors

Analytical Modeling and Analysis of Open-Circuit Magnet Loss in Surface-Mounted Permanent-Magnet Machines

Simplified Analytical Model and Investigation of Open-Circuit AC Winding Loss of Permanent-Magnet Machines.

Analytical Model of Eddy Current Loss in Windings of Permanent-Magnet Machines Accounting for Load

Analytical investigation of open-circuit eddy current loss in windings of PM machines

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

Measurement Method of High-Frequency Winding Loss in Gapped Inductors Based on Magnetic Field Equivalence

2-D Analytical Copper Loss Model for PCB and Copper Foil Magnetics with Arbitrary Air Gaps

AC Copper Loss Reduction in Planar Inductors with Magnetic Building Blocks-Based Gapless Parallel Symmetrical Magnetoresistance Structure

Two-Dimensional Winding Loss Analytical Model for High-Frequency Multilayer Air-Core Planar Inductor

An Improved Winding Loss Analytical Model of Flyback Transformer

Modelling and Optimisation of Planar Matrix Transformer for High Frequency Regulated LLC Converter

The Faraday Shields Loss of Transformers

An accurate calculation method for inductor air gap length in high power DC–DC converters

Fringing Field Analytical Calculation of High Frequency Planar Magnetic Components

Simplified 2-D analytical model for winding loss analysis of flyback transformers

Predicting Iron Losses in Laminated Steel with Given Non-Sinusoidal Waveforms of Flux Density

Parameter Modeling Analysis of a Cylindrical Ferrite Magnetic Shield to Reduce Magnetic Noise

High Frequency Magnetic Core Loss Study

Modeling and Design of High-Frequency Magnetic Components with Large Air Gaps for Electric Vehicle Charger Application