Abstract:Long-term successful function of artificial hip joint replacements strongly depends on the design parameters of the bearing such as the diameters of femoral head and acetabular cup and the corresponding radial clearance, which determine the lubrication regime experienced in the prostheses. Generally, there are two types of numerical models for elastohydrodynamic lubrication analysis of the bearing in the hip joint replacements: ball-in-socket model and effective ball-on-plane model. As the real hip joint is in ball-in-socket configuration, the ball-in-socket lubrication model should be the reasonable approximation to the real bearing. The ball-in-socket model solves a lubrication problem in spherical coordinates, which means all of governing equations, including Reynolds equation, film thickness and load balance equation, should be written as the spherical coordinate forms. In addition, the calculation of the elastic deformation of the bearing surfaces in artificial joints is not a trial problem. Complex spherical geometries in the joint bearing often require employing the finite element method to determine/extract the displacement influence coefficients at first, and then the deformation is evaluated through using an equivalent discrete spherical convolution model (EDSC). Fortunately, the FFT-based approach is recently developed to speed up the deformation calculation. In comparison with the ball-in-socket model, the effective ball-on-plane model is simple and easy to conduct elastohydrodynamic lubrication analysis. The main characteristic of the effective ball-on-plane model is that the elastic deformation was evaluated under an assumption of semi-infinite solid and certainly without the consideration of the curvature effect associated with the ball-in-socket configuration. In the present study, some typical cases of elastohydrodynamic lubrication analysis for hip joint replacements were conducted to systematically demonstrate the capability of these two models. It was found that the two models were able to provide quite close results in most situations, and the difference may only take place when the head is positioned near the edge of the cup bearing surface.

Experimental And Numerical Studies On Radial Spherical Plain Bearing Based Articulated Joint Subjected To Radial Loading

Elastic Finite Element Analyses and Experiment Research on Welded Spherical Joints with Square Hollow Sections

Experimental and numerical study on compressive behavior of welded hollow spherical joints with external stiffeners

Modeling and simulation of wear for alignment mechanism of large aircraft component

Dynamic Analysis of Double-Row Self-Aligning Ball Bearings Due to Applied Loads, Internal Clearance, Surface Waviness and Number of Balls

Load-Carrying Capacity and Practical Calculation Method for Hollow Cylinder Joints Connected with H-Shaped Beams

Load-carrying capacity of welded hollow spherical joints subject to combined planar tri-directional axial force and bending moment

Load-carrying Capacity and Practical Calculation Method of Welded Hollow Spherical Joints with Square Steel Tubes Subjected to Combined Axial Forces and Biaxial Bending Moments

An approach for calculating the dynamic load of deep groove ball bearing joints in planar multibody systems

Nonlinear Analysis for the Bearing Properties of Multiplanar Tubular Joints with Square and Circular Hollow Sections

Finite Element Analyses and Experiments on Welded Spherical Joints with Rectangular Tubes

Axial Compression Bearing Capacity of Bolted Drum-Shaped Spherical Shell Joints: Experimental and Numerical Analysis

Non-Linear Analysis of Ultimate Loading Capacity of Cast Tubular Y-Joints under Axial Loading

Non-linear Analysis on Cast Tubular T-joint Loaded by In-Plane Bending

Mechanical Properties Analysis of Cylindrical Roller Bearings with Different Profiles under Combined Load

Numerical Lubrication Simulation of Metal-on-Metal Hip Joints: Ball-in-Socket Model and Ball-on-Plane Model

Nonlinear Analysis for the Bearing Properties of Cast Aluminum Joint in the Aluminum Alloy Lattice Shell Structures

Excavation unloading response of cylindrical rock-like specimen with axial joints: laboratory experiment and numerical simulation

Research on the stiffness characteristics and contact status of matched angular contact ball bearings considering the effect of varying spatial position of rolling ball

Non-linear Analysis on Axially Loaded Cast Tubular T-joints Including the Effects of Fillet Parameter

Dynamic contact and stiffness characteristic analysis of angular contact ball bearings under combined external loads