Low-Threshold Plasmonic Nanolaser Structure Based on Coupled Nanowires

Yusheng Bian,Zheng,Jiansheng Liu,Jinsong Zhu,Tao Zhou

2011-01-01

Abstract:A novel type of plasmonic nanolaser based on coupled nanowires consisting of a gain material and a core/shell metal/dielectric nanowire is proposed. It shows the potential to enable deep-subwavelength lasing with low pump thresholds.

What problem does this paper attempt to address?

Hybrid Photon-Plasmon Nanowire Lasers

Xiaoqin Wu,Yao Xiao,C. Z. Ning,Limin Tong

DOI: https://doi.org/10.1021/nl403325j

IF: 10.8

2013-01-01

Nano Letters

Abstract:Metallic and plasmonic nanolasers have attracted growing interest recently. Plasmonic lasers demonstrated so far operate in hybrid photon-plasmon modes in transverse dimensions, rendering it impossible to separate photonic from plasmonic components. Thus only the far-field photonic component can be measured and utilized directly. But spatially separated plasmon modes are highly desired for applications including high-efficiency coupling of single-photon emitters and ultrasensitivity optical sensing. Here, we report a nanowire (NW) laser that offers subdiffraction-limited beam size and spatially separated plasmon cavity modes. By near-field coupling a high-gain CdSe NW and a 100 nm diameter Ag NW, we demonstrate a hybrid photon-plasmon laser operating at 723 nm wavelength at room temperature, with a plasmon mode area of 0.008λ(2). This device simultaneously provides spatially separated photonic far-field output and highly localized coherent plasmon modes, which may open up new avenues in the fields of integrated nanophotonic circuits, biosensing, and quantum information processing.
Nanowire Based Hybrid Plasmonic Structures for Low-Threshold Lasing at the Subwavelength Scale

Yusheng Bian,Zheng,Xin Zhao,Lei Liu,Jiansheng Liu,Jinsong Zhu,Tao Zhou

DOI: https://doi.org/10.1016/j.optcom.2012.09.043

IF: 2.4

2013-01-01

Optics Communications

Abstract:Novel plasmonic nanolaser structures are proposed by leveraging the efficient guiding properties of hybrid plasmonic modes of nanowire based waveguides. Theoretical investigations reveal that the coupling between the metal nanowire and the high-index dielectric nanostructure with optical gain results in strong field enhancement in the low-index gap region, sufficient modal overlap with the gain medium and low propagation loss, which could enable lasing at the subwavelength scale with low pump threshold. The proposed nanowire-based plasmonic nanolasers are also compatible with standard fabrication technology and could be appealing candidates for active photonic systems.
Simulation Design of a Low Threshold Hybrid Plasmonic Nanolaser

Li Zhi-quan,Feng Dan-dan,Bai Lan-di,Liu Tong-lei,Yue Zhong,Gu Er-dan,Li Wen-chao

DOI: https://doi.org/10.3788/gzxb20174608.0814002

2017-01-01

Abstract:A low threshold nanolaser that contains nanowires, air gap and semicircular-top metal nanoridge structure was proposed. Through the finite element method to model characteristics and the quality of the laser gain factor and threshold for numerical calculation, the characteristic factor was studied with the geometric parameters (air gap, metal ridge width and nanowire radius) change. The results show that the property of the laser is optimized by adjusting the parameters. Under the optimal parameters, the gain threshold can reach 0.47 mu m(-1) and the transmission loss is only about 0. 018. This shows that the nanolaser structure can achieve low threshold sub wavelength lasing and low loss transmission. It has a wide application prospect in the fields of biomedicine, optical communication etc. It provides technical support for miniaturization and integration of nano devices.
Low-Threshold Nanolaser Based on Hybrid Plasmonic Waveguide Mode Supported by Metallic Grating Waveguide Structure

Xin Zhang,Meng Yan,Tingyin Ning,Lina Zhao,Shouzhen Jiang,Yanyan Huo

DOI: https://doi.org/10.3390/nano11102555

IF: 5.3

2021-09-29

Nanomaterials

Abstract:A high Q-factor of the nanocavity can effectively reduce the threshold of nanolasers. In this paper, a modified nanostructure composed of a silver grating on a low-index dielectric layer (LID) and a high-index dielectric layer (HID) was proposed to realize a nanolaser with a lower lasing threshold. The nanostructure supports a hybrid plasmonic waveguide mode with a very-narrow line-width that can be reduced to about 1.79 nm by adjusting the thickness of the LID/HID layer or the duty ratio of grating, and the Q-factor can reach up to about 348. We theoretically demonstrated the lasing behavior of the modified nanostructures using the model of the combination of the classical electrodynamics and the four-level two-electron model of the gain material. The results demonstrated that the nanolaser based on the hybrid plasmonic waveguide mode can really reduce the lasing threshold to 0.042 mJ/cm2, which is about three times lower than the nanolaser based on the surface plasmon. The lasing action can be modulated by the thickness of the LID layer, the thickness of the HID layer and the duty cycle of grating. Our findings could provide a useful guideline to design low-threshold and highly-efficient miniaturized lasers.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Study of Plasmonic Nanolaser Based on the Deep Subwavelength Scale

Huang Hong,Zhao Qing,Jiao,Liang Gao-Feng,Huang Xiao-Ping

DOI: https://doi.org/10.7498/aps.62.135201

IF: 0.906

2013-01-01

Acta Physica Sinica

Abstract:We have proposed a novel surface plasmonic nanolaser based on a nanowire/air gap/metal thin film hybrid structure to carry out theoretical research and simulation analysis. Opening an air groove in the MgF2 insulating layer, then making a nanowire embedded on the top of the air slot but maintaining a gap between the nanowire and the metal layer, thereby we produce a coupled hybrid plasmonic waveguide and a significant field enhancement effect. This structure enables the realization of an air gap. By simulating the modal properties and the lasing threshold of the hybrid plasmonic mode under different geometric parameters, the capacity of subwavelength scale with low propagation loss and high field confinement is demonstrated. Finally we achieve the nanolaser's optimal structure size. Compared with the general diffraction limit laser, this structure can reduce the physical size of the device and the physical mode. The proposed nanolaser could be easily integrated with various nanophotonic devices, and it may become an appealing candidate for future active plasmonic systems.
Hybrid Plasmonic Structures Based on Cds Nanotubes: A Novel Route to Low-Threshold Lasing on the Nanoscale

Yusheng Bian,Zheng,Xin Zhao,Yalin Su,Lei Liu,Jiansheng Liu,Tao Zhou,Jinsong Zhu

DOI: https://doi.org/10.1088/0022-3727/45/50/505105

2012-01-01

Abstract:Nanowires and nanotubes could become important building blocks in advanced photonic systems owing to their fascinating optoelectronic properties and high compatibility with versatile chemical synthetic methods. Many intriguing studies have been enabled by applying these nanostructures in the construction of various types of active and passive photonic components. Successful examples are the recent demonstration of semiconductor and plasmonic lasers based on CdS nanowires (Duan et al 2003 Nature 421 241–5, Oulton et al 2009 Nature 461 629–32, Ma et al 2010 Nature Mater. 10 110–13), which generate and deliver intense coherent light down to and even below the diffraction-limited scale. Here in this paper, by carrying out a numerical investigation of a novel hybrid plasmonic structure that consists of a CdS nanotube sitting above a metal substrate separated by a nanometric MgF2 layer, we show theoretically that nanotube-based plasmonic structures can also act as highly efficient lasing sources. Optical properties of such a laser configuration including modal behaviour and the lasing threshold is investigated with regard to the variation of key geometrical parameters. Simulation results reveal that the employment of a CdS nanotube may result in improved optical performance compared with the conventional CdS-nanowire-based plasmon laser. Reduced lasing threshold with mitigated modal loss can be achieved simultaneously under carefully engineered geometries. We also explore the feasibility of combining nanowire- and nanotube-based active and passive components for on-chip integrations. As a simple demonstration, monolithic integration of a CdS nanotube laser with a CdS-nanowire-based passive component is shown numerically on a single chip. We expect that these studies could lay the foundations for nanotube- and nanowire-based hybrid integrated photonic components and circuits.
Single-Nanorod Plasmon Nanolaser: A Route Toward A Three-Dimensional Ultraconfined Lasing Mode

Yixiao Gao,Hao Wu,Ning Zhou,Yuxin Yang,Xin Guo,Pan Wang,Jianqiang You,Ying Gu,Guowei Lu,Qihuang Gong,Limin Tong

DOI: https://doi.org/10.1103/PhysRevA.102.063520

IF: 2.971

2020-01-01

Physical Review A

Abstract:A single-nanoparticle plasmon laser with ultratight optical confinement in all three dimensions is a long-cherished but yet to be realized goal. Here we propose an experimentally realizable plasmon laser using a single nanorod. We show that, by harnessing a Au-nanorod cavity with a large gain from a Purcell-enhanced stimulated emission rate and greatly suppressed high-order mode dissipation, it is possible to implement a dipole-mode plasmon laser with accessible material parameters. Our approach may lead to a real single-nanoparticle plasmon laser with three-dimensional ultraconfinement and offers an opportunity to explore and utilize the enhanced light-matter interaction at a lower dimension.
Deep-Subwavelength Hybrid Plasmonic Waveguide with Metal-Semiconductor Ribs for Nanolaser Applications

Zhiquan Li,Ruiqi Piao,Jingjing Zhao,Xiaoyun Meng,Wenchao Li,Liyong Niu,Erdan Gu

DOI: https://doi.org/10.1088/2040-8978/17/12/125008

IF: 2.1

2015-01-01

Journal of Optics

Abstract:We propose a novel hybrid plasmonic waveguide with metal-semiconductor ribs. We investigated the modal properties of the proposed structure and the threshold property for plasmonic nanolaser applications by using the finite element method. The results reveal that the structure enables deep-subwavelength mode confinement with low propagation loss and low threshold. By optimizing the geometric parameters of the structure, the mode area can reach 0.000 29λ2 with a threshold of 700.9/cm at the wavelength of 1.55 μm. Compared to the previously studied hybrid plasmonic waveguide, tighter mode confinement and lower propagation loss is simultaneously achieved for the structure with the same geometric parameters. The designed structure can be used as a low-threshold nanolaser and has promising potential for applications in active plasmonic systems and optoelectronic integrated circuits.
Low-threshold plasmonic lasing based on high-Q dipole void mode in a metallic nanoshell.

J Pan,Z Chen,J Chen,P Zhan,C J Tang,Z L Wang

DOI: https://doi.org/10.1364/OL.37.001181

IF: 3.6

2012-01-01

Optics Letters

Abstract:We propose a novel type of plasmonic lasing nanostructure consisting of a metallic shell and a gain core. We demonstrate numerically that highly localized void modes of such metallodielectric core-shell nanoparticles have a very high quality factor. We found that the dipole void mode has a lasing threshold as low as 128 cm(-1) at 800 nm as a result of the unique mode distribution within the shell, due to a maximum field enhancement around the void center. The lasing condition for a symmetry-reduced silver nanocup is also investigated and the low plasmonic lasing threshold is sustained provided that the opening angle of the nanocup is smaller than 10 degrees. Our proposal presents a new path toward plasmonic lasers with low gain threshold. (C) 2012 Optical Society of America
Deep-subwavelength coplanar plasmonic laser based on an edge-coupled hybrid plasmon waveguide

Yusheng Bian,Zheng Zheng,Ya Liu,Jinsong Zhu,Tao Zhou

DOI: https://doi.org/10.1364/fio.2010.fthc8

2010-01-01

Abstract:A novel coplanar plasmonic laser based on an edge-coupled hybrid plasmon waveguide is proposed. The easy-to-fabricate structure could enable deep-subwavelength lasing with low pump thresholds and be readily integrated with other plasmonic structures.
Double-wavelength Nanolaser Based on Strong Coupling of Localized and Propagating Surface Plasmon

Yanan Wu,Junqiao Wang,Mengke Ren,Wenhan Zhao,Ran Li,Chun Zhen Fan,Erjun Liang,Yan Li,Pei Ding,Jinna He

DOI: https://doi.org/10.1088/1361-6463/ab6571

2019-01-01

Journal of Physics D Applied Physics

Abstract:We theoretically demonstrate a kind of plasmon coupled cavity to achieve a nanolaser with high intensity and low threshold. The plasmon cavity is composed of the gold film substrate and gold disk array, which supports two strong coupled resonance modes (i.e. surface plasmon polariton (SPP) and localized surface plasmon (LSP)). Compared with the nanolaser with the LSP resonance structure, the scattering cross-section of the LSP-SPP coupled laser is 80 times higher. The coupled cavity nanolaser with different wavelengths can be excited with different plasmon resonance modes by selecting the appropriate gain medium. In addition, a compact tunable dual-wavelength laser can be developed using this coupled structure.
A Low-Threshold Miniaturized Plasmonic Nanowire Laser with High-Reflectivity Metal Mirrors

Jiahui Zheng,Xin Yan,Wei Wei,Chao Wu,Nickolay Sibirev,Xia Zhang,Xiaomin Ren

DOI: https://doi.org/10.3390/nano10101928

IF: 5.3

2020-09-27

Nanomaterials

Abstract:A reflectivity-enhanced hybrid plasmonic GaAs/AlGaAs core-shell nanowire laser is proposed and studied by 3D finite-difference time-domain simulations. The results demonstrate that by introducing thin metal mirrors at both ends, the end facet reflectivity of nanowire is increased by 30–140%, resulting in a much stronger optical feedback. Due to the enhanced interaction between the surface charge oscillation and light, the electric field intensity inside the dielectric gap layer increases, resulting in a much lower threshold gain. For a small diameter in the range of 100–150 nm, the threshold gain is significantly reduced to 60–80% that of nanowire without mirrors. Moreover, as the mode energy is mainly concentrated in the gap between the nanowire and metal substrate, the output power maintains >60% that of nanowire without mirrors in the diameter range of 100–150 nm. The low-threshold miniaturized plasmonic nanowire laser with simple processing technology is promising for low-consumption ultra-compact optoelectronic integrated circuits and on-chip communications.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Direct Coupling of Plasmonic and Photonic Nanowires for Hybrid Nanophotonic Components and Circuits.

Xin Guo,Min Qiu,Jiming Bao,Benjamin J. Wiley,Qing Yang,Xining Zhang,Yaoguang Ma,Huakang Yu,Limin Tong

DOI: https://doi.org/10.1021/nl902860d

IF: 10.8

2009-01-01

Nano Letters

Abstract:We report direct coupling of plasmonic and photonic nanowires using ultracompact near-field interaction. Photon-plasmon coupling efficiency up to 80% with coupling length down to the 200 nm level is achieved between individual Ag and ZnO nanowires. Hybrid nanophotonic components, including polarization splitters, Mach-Zehnder interferometers, and microring cavities, are fabricated out of coupled Ag and ZnO nanowires. These components offer relatively low loss with subwavelength confinement; a hybrid nanowire microcavity exhibits a Q-factor of 520.
Hybrid Structure Laser Based on Semiconductor Nanowires and a Silica Microfiber Knot Cavity

Qing Yang,Xiaoshun Jiang,Xin Guo,Yuan Chen,Limin Tong

DOI: https://doi.org/10.1063/1.3093821

IF: 4

2009-01-01

Applied Physics Letters

Abstract:We demonstrate a hybrid structure laser consisting of a single or multiple zinc oxide (ZnO)nanowires attached to a silica microfiber knot cavity, which is pumped by 355 nm wavelength laser pulses. The laser threshold is lower than 0.2 μ J / pulse . The measured linewidth of the lasing mode is about 0.04 nm. The hybrid structure combines advantages of high gain of semiconductornanowires and high quality factor of microfiber knot cavities. Additionally, the design offers convenient and efficient approach to both pumping and collection of the semiconductornanowire lasers.
Low-Threshold Multiwavelength Plasmonic Nanolasing in an "H"-Shape Cavity

Chenyang Li,Xutao Zhang,Ruixuan Yi,Ziyuan Li,Fanlu Zhang,Kaihui Liu,Xuetao Gan,Lan Fu,Fajun Xiao,Jianlin Zhao,Hark Hoe Tan,Chennupati Jagadish

DOI: https://doi.org/10.1002/lpor.202300187

2023-01-01

Abstract:Multiwavelength plasmonic nanolasers are central to the quest for ultradense and versatile photonic integrations. However, the insufficient optical feedback and mode selection strategies result in a high lasing threshold and multi-mode operation with limited spectral purity and stability. Here, a multiwavelength near-infrared plasmonic nanolaser with high mode purity by leveraging a nontrivial "H"-shape plasmonic cavity is demonstrated. The nanolaser is constructed by inserting InGaAs/GaAs multi-quantum-disk (MQD) nanowires into a metallic Fabry-Perot cavity consisting of a pair of Ag nanowires positioned on an ultrasmooth Au film. The design is endowed with strong optical feedback to enhance the energy transfer between the exciton and plasmon, rendering a significant reduction of the lasing threshold. More importantly, the "H"-shape cavity is featured with a large flexibility in tuning the resonance wavelength, where multiwavelength lasing with the virtues of single-mode is realized at room temperature. The results make a crucial step toward near-infrared multiwavelength plasmonic nanolasers and open up exciting opportunities for applications such as ultracompact photonic integrated circuits and high-throughput biochemical sensing.
Low-threshold Lasing in a Plasmonic Laser Using Nanoplate InGaN/GaN

Ting Zhi,Tao,Xiaoyan Liu,Junjun Xue,Jin Wang,Zhikuo Tao,Yi Li,Zili Xie,Bin Liu

DOI: https://doi.org/10.1088/1674-4926/42/12/122803

2021-01-01

Journal of Semiconductors

Abstract:Plasmonic nanolaser as a new type of ultra-small laser,has gain wide interests due to its breaking diffraction limit of light and fast carrier dynamics characters.Normally,the main problem that need to be solved for plasmonic nanolaser is high loss induced by optical and ohmic losses,which leads to the low quality factor.In this work,InGaN/GaN nanoplate plasmonic nanolaser with large interface area were designed and fabricated,where the overlap between SPs and excitons can be en-hanced.The lasing threshold is calculated to be ～6.36 kW/cm2,where the full width at half maximum (FWHM) drops from 27 to 4 nm.And the fast decay time at 502 nm (sharp peak of stimulated lasing) is estimated to be 0.42 ns.Enhanced lasing charac-ters are mainly attributed to the strong confinement of electromagnetic wave in the low refractive index material,which im-prove the near field coupling between SPs and excitons.Such plasmonic laser should be useful in data storage applications,bio-logical application,light communication,especially for optoelectronic devices integrated into a system on a chip.
Hybrid Plasmonic Waveguides for Low-Threshold Nanolaser Applications

Hongbo Lv,Yumin Liu,Zhongyuan Yu,Chunwei Ye,Jie Wang

DOI: https://doi.org/10.3788/col201412.112401

2014-01-01

Abstract:We propose new types of hybrid plasmonic waveguides for low-threshold nanolaser applications. Modal properties and lasing threshold under different geometric shapes and parameters are investigated and analyzed by the finite element method, aiming to realize both low propagation and high field confinement. Results show that a smaller gap width and a larger round corner radius of the metal film reduce the lasing threshold. These new structures can open up new avenues in the fields of active plasmonic circuits.
Triangular Metal Wedge/groove Based Hybrid Plasmonic Structures for Low-Threshold Deep-Subwavelength Lasing

Yusheng Bian,Zheng,Ya Liu,Jiansheng Liu,Jinsong Zhu,Tao Zhou

DOI: https://doi.org/10.1364/fio.2011.ftuu6

2011-01-01

Abstract:We propose triangular metal wedge/groove based hybrid plasmonic structures for lasing applications. Theoretical studies show the laser’s properties could be tuned by controlling the tip angle of the metallic substrate.
Low-threshold upconversion plasmonic lasers based on CsPbBr3 nanoplates

Quanlong Zhang,Jixin Zhai,Chenxi Liu,Qianqian Zhong,Zhiqiang Ji,Xiao Yi,Yangguang Zhong,Chenglin He,Ziyu Luo,Liancheng Wang,Shula Chen,Anlian Pan

DOI: https://doi.org/10.1007/s40843-024-2966-5

2024-06-16

Science China Materials

Abstract:Upconversion lasers offer a robust platform for the new generation of highly integrated nonlinear optoelectronic applications. They are central in addressing the ongoing pursuit of miniaturization, low loss, and high-quality nonlinear light sources required for modern photonic integrated circuits. However, the endeavor to minimize volume and threshold poses inevitable challenges to the anti-Stokes process within upconversion lasers. In this study, we report a potential room-temperature upconversion plasmonic nanolaser utilizing CsPbBr 3 nanoplates. This device exhibits a significant decrease in threshold over a wide volume range while maintaining a high-quality factor. More excitingly, we have successfully fabricated the miniaturized upconversion plasmonic lasers with a thickness as low as 70 nm, breaking down the optical diffraction limit to the deep sub-wavelength regime. Through carefully plotted simulations of two-photon (TP) excitation light fields, we have revealed the intricacies of the plasmon-assisted lasing process. Furthermore, our experiments, which vary the thicknesses of the insulating SiO 2 layer, have unveiled the tunable properties of the TP excitation light confinement intensity and the Purcell effect. These findings open up promising avenues for fine-tuning the performance of plasmonic devices. Our research underscores the efficiency and low-threshold attributes of upconversion plasmonic nanolasers, heralding them as potent candidates for on-chip nonlinear light sources.

materials science, multidisciplinary
Near-infrared Hybrid Plasmonic Multiple Quantum Well Nanowire Lasers.

Jiamin Wang,Wei,Xin Yan,Jinnan Zhang,Xia Zhang,Xiaomin Ren

DOI: https://doi.org/10.1364/oe.25.009358

IF: 3.8

2017-01-01

Optics Express

Abstract:The lasing characteristics of hybrid plasmonic AlGaAs/GaAs multiple quantum well (MQW) nanowire (NW) lasers beyond diffraction limit have been investigated by 3D finite-difference time-domain simulations. The results show that the hybrid plasmonic MQW NW has lower threshold gain over a broad diameter range in comparison with its photonic counterpart. Beyond the diffraction limit, the hybrid plasmonic MQW NW has a lowest threshold gain of 788 cm-1 at a diameter of 130 nm, and a cutoff diameter of 80 nm, half that of the photonic lasers. In comparison with the hybrid plasmonic core-shell NWs, the hybrid plasmonic MQW NWs exhibit significantly lower threshold gain, higher Purcell factor, and smaller cutoff diameter, which are attributed to the superior overlap between the hybrid plasmonic modes and gain medium, as well as a stronger optical confinement due to the grating-like effect of MQW structures. Moreover, the hybrid plasmonic MQW NW has a lower threshold gain than that of the core-shell NW over a broad wavelength range. The hybrid plasmonic MQW NW structure is promising for ultrasmall and low-consumption near-infrared nanolasers.

Low-Threshold Plasmonic Nanolaser Structure Based on Coupled Nanowires

Hybrid Photon-Plasmon Nanowire Lasers

Nanowire Based Hybrid Plasmonic Structures for Low-Threshold Lasing at the Subwavelength Scale

Simulation Design of a Low Threshold Hybrid Plasmonic Nanolaser

Low-Threshold Nanolaser Based on Hybrid Plasmonic Waveguide Mode Supported by Metallic Grating Waveguide Structure

Study of Plasmonic Nanolaser Based on the Deep Subwavelength Scale

Hybrid Plasmonic Structures Based on Cds Nanotubes: A Novel Route to Low-Threshold Lasing on the Nanoscale

Single-Nanorod Plasmon Nanolaser: A Route Toward A Three-Dimensional Ultraconfined Lasing Mode

Deep-Subwavelength Hybrid Plasmonic Waveguide with Metal-Semiconductor Ribs for Nanolaser Applications

Low-threshold plasmonic lasing based on high-Q dipole void mode in a metallic nanoshell.

Deep-subwavelength coplanar plasmonic laser based on an edge-coupled hybrid plasmon waveguide

Double-wavelength Nanolaser Based on Strong Coupling of Localized and Propagating Surface Plasmon

A Low-Threshold Miniaturized Plasmonic Nanowire Laser with High-Reflectivity Metal Mirrors

Direct Coupling of Plasmonic and Photonic Nanowires for Hybrid Nanophotonic Components and Circuits.

Hybrid Structure Laser Based on Semiconductor Nanowires and a Silica Microfiber Knot Cavity

Low-Threshold Multiwavelength Plasmonic Nanolasing in an "H"-Shape Cavity

Low-threshold Lasing in a Plasmonic Laser Using Nanoplate InGaN/GaN

Hybrid Plasmonic Waveguides for Low-Threshold Nanolaser Applications

Triangular Metal Wedge/groove Based Hybrid Plasmonic Structures for Low-Threshold Deep-Subwavelength Lasing

Low-threshold upconversion plasmonic lasers based on CsPbBr3 nanoplates

Near-infrared Hybrid Plasmonic Multiple Quantum Well Nanowire Lasers.