Abstract:By boosting the emission strength by a factor of 100, a new hybrid photonic‒plasmonic architecture is successfully demonstrated to realize low‐threshold room‐temperature UV nanolasers that can be monolithically integrated into silicon. The synergistic engineering of the metal‒semiconductor heterojunction, the modal reflectivity, and the intermodal coupling engender the realization of electrically driven nanolasers. The metal‒semiconductor heterojunction is imperative for the realization of electrically driven nanolasers for chip‐level platforms. Progress in developing such nanolasers has hitherto rarely been realized, however, because of their complexity in heterojunction fabrication and the need to use noble metals that are incompatible with microelectronic manufacturing. Most plasmonic nanolasers lase either above a high threshold (101‒103 MW cm−2) or at a cryogenic temperature, and lasing is possible only after they are removed from the substrate to avoid the large ohmic loss and the low modal reflectivity, making monolithic fabrication impossible. Here, for the first time, record‐low‐threshold, room‐temperature ultraviolet (UV) lasing of plasmon‐coupled core‒shell nanowires that are directly grown on silicon is demonstrated. The naturally formed core‒shell metal‒semiconductor heterostructure of the nanowires leads to a 100‐fold improvement in growth density over previous results. This unprecedentedly high nanowire density creates intense plasmonic resonance, which is outcoupled to the resonant Fabry‒Pérot microcavity. By boosting the emission strength by a factor of 100, the hybrid photonic‒plasmonic system successfully facilitates a record‐low laser threshold of 12 kW cm−2 with a spontaneous emission coupling factor as high as ≈0.32 in the 340‒360 nm range. Such architecture is simple and cost‐competitive for future UV sources in silicon integration.

A Low-Threshold Miniaturized Plasmonic Nanowire Laser with High-Reflectivity Metal Mirrors

Hybrid Photon-Plasmon Nanowire Lasers

Design and Simulation of Low-Threshold Miniaturized Single-Mode Nanowire Lasers Combined with a Photonic Crystal Microcavity and Asymmetric Distributed-Bragg-Reflector Mirrors

Miniaturized GaAs Nanowire Laser with a Metal Grating Reflector

Enhanced Reflection of GaAs Nanowire Laser Using Short-Period, Symmetric Double Metal Grating Reflectors

Low-threshold Single-Mode Nanowire Array Flat-Band Photonic-Crystal Surface-Emitting Lasers with High-Reflectivity Bottom Mirrors.

Ultra-small Low-Threshold Mid-Infrared Plasmonic Nanowire Lasers Based on N-Doped GaN

Simulation Design of a Low Threshold Hybrid Plasmonic Nanolaser

Low-Threshold Plasmonic Nanolaser Structure Based on Coupled Nanowires

Nanowire Based Hybrid Plasmonic Structures for Low-Threshold Lasing at the Subwavelength Scale

Tunable Plasmonic Nanolaser Based on Graphene

Room-Temperature Low-Threshold Plasmonic Nanolaser through Mode-Tailoring at Communication Wavelengths

On‐Chip Monolithically Integrated Ultraviolet Low‐Threshold Plasmonic Metal‒Semiconductor Heterojunction Nanolasers

Novel graphene enhancement nanolaser based on hybrid plasmonic waveguides at optical communication wavelength

Low-Threshold Nanolaser Based on Hybrid Plasmonic Waveguide Mode Supported by Metallic Grating Waveguide Structure

Plasmonic and Photonic Lasers Based on Semiconductor Nanowires: Low-loss and High Mode-tunablity

Near-infrared Hybrid Plasmonic Multiple Quantum Well Nanowire Lasers.

Single-Nanorod Plasmon Nanolaser: A Route Toward A Three-Dimensional Ultraconfined Lasing Mode

Semiconductor Nanowire Plasmonic Lasers

Novel SPP Nanolaser with Two Modes of Electromagnetic for Optoelectronic Integration Device

Room temperature plasmonic lasing in a continuous wave operation mode from an InGaN/GaN single nanorod with a low threshold