Abstract:Optical fibers are drawn from preforms (fused silica glass rods) typically made up of two concentric cylinders (the core rod and the clad tube), which are usually joined in a separate fusion process. The setup time and hence manufacturing cost can be significantly reduced if the two cylinders can be joined in the same furnace in which the fiber is drawn. A good understanding of the transient temperature distribution is needed for controlling the feed rate to avoid thermally induced cracks. Since direct measurement of the temperature fields is often impossible, the geometrical design of the preform and the control of the feed rate have largely been accomplished by trials-and-errors. The ability to predict the transient temperature distribution and the thermally induced stresses will provide a rational basis to design optimization and feed rate control of the process. In this paper, we present an analytical model to predict the transient conductive-radiative transfer as two partially joined, concentric glass cylinders with specular surfaces are fed into the furnace. Finite volume method (FVM) is used to solve the radiative transfer equation (RTE). The specular surface reflectivity is obtained by the Fresnel’s law and the Snell’s law. The boundary intensities are obtained through the coupling of the interior glass radiative transfer and the exterior furnace enclosure analysis. The model has been used to numerically study the transient conductive-radiative transfer in the advanced melting zone (AMZ) of an optic fiber drawing process. This problem is of both theoretical and practical interest in the manufacture of optical fibers. The computational method for the radiation transfer developed in this paper can also be applied to the simulation of the fiber drawing process and other glass-related manufacturing processes.

Theoretical and Experimental Analysis of Tapering Large-Diameter Glass Capillary for Optical Fiber Components

Glass Nanofibers for Micro- and Nano-Scale Photonic Devices

Microtube's tapers affect its subwavelength focusing effect

Subwavelength-diameter optical fibers: waveguiding properties and photonic applications

Modeling bending losses of optical nanofibers or nanowires.

Theoretical and Numerical Analysis for Design of High Ratio Fiber Optic Taper Drawing Process

Tapered Optical Fiber Sensing Technology

Theoretical analysis of tapering fused silica optical fibers using a carbon dioxide laser

Optical Fiber Index Taper–Theoretical Analysis and Experiment Demonstration

Fabrication Methods and High-Precision Diameter Control Techniques of Optical Micro-/Nanofibers

Control of Stress Distribution During Large Radius Fiber Optic Taper Drawing Process Based on 2D Simulation

FEM Simulation and Analysis on Molding Process of Infrared Aspheric Lenses

Finite Element Analysis on Non-Isothermal Glass Molding

Novel fiber taper for efficient optical interconnection

Modeling of Advanced Melting Zone for Manufacturing of Optical Fibers

Numerical Simulation of Composite Material Light-Curing Process Based on the Finite Element Analysis Method

An Multi-to-single Mode Conversion Experiment Using the Tapered Fiber

Modeling light propagation through taper-microfiber structures integrated on substrates

A Design of Optical Fiber Microcoupler with Laser-Fused Biconical Tapers

Observation of the Plateau-Rayleigh Capillary Instability in Multi-Material Optical Fibers

A Simple Fabrication Method for Tapered Capillary Tip and Its Applications in High-Speed CE and ESI-MS.