Abstract:Vertical wall surfaces with obstacles present a serious challenge for wall-climbing robots. Owing to their limitations in overcoming obstacles, these types of robots have not been commercialized yet. Several ideas on novel designs and precise control have been suggested; however, further research is required to achieve enhanced robot capabilities in overcoming obstacles. Specifically, the use of dry adhesive methods by wall-climbing robots to climb over obstacles present tremendous challenges. This study introduces the design of a new linkage-type, wall-climbing robot, based on dry adhesion, for uneven vertical surfaces. Based on a four-bar mechanism, repeated walking is achieved via a single actuator. The robot's most important feature is the linkage design used for climbing over obstacles, which has been adopted from rover running patterns. The symmetric linkage design renders the robot adaptable to uneven surfaces with a compliant motion. Additionally, flat dry adhesives were used for the attachment mechanism. The design parameters were determined based on kinematic and static analyses, and certain important issues in linkage-type wall-climbing robot designs were addressed. The robot's performance was verified using experiments, whereby it was able to climb up and go down stairs with maximum stair heights of 15 mm (equal to 0.6% of the robot's height) during open-loop vertical walking. We expect that the linkage design can extend the accessible area of the wall-climbing robot. This study introduces the design of a new linkage-type, wall-climbing robot, based on dry adhesion, for uneven vertical surfaces. Based on a four-bar mechanism, repeated walking is achieved via a single actuator. The robot's most important feature is the linkage design used for climbing over obstacles, which has been adopted from rover running patterns. The symmetric linkage design renders the robot adaptable to uneven surfaces with a compliant motion. Additionally, flat dry adhesives were used for the attachment mechanism. The design parameters were determined based on kinematic and static analyses, and certain important issues in linkage-type wall-climbing robot designs were addressed. The robot's performance was verified using experiments, whereby it was able to climb up and go down stairs with maximum stair heights of 15 mm (equal to 0.6% of the robot's height) during open-loop vertical walking. We expect that the linkage design can extend the accessible area of the wall-climbing robot. (C) 2018 Elsevier Ltd. All rights reserved.

DESIGN AND TESTING OF A WALL-CLIMBING ROBOT WITH UNDER-ACTUATED FORCE ADJUSTING MECHANISM

A Wall-Climbing Robot Using Gecko-Inspired Dry Adhesives and Underactuated Modular Connecting Mechanism

Analysis and Optimization of the Wall-Climbing Robot with an Adsorption System and Adhesive Belts

Design, Modeling and Experimentation of a Biomimetic Wall-climbing Robot for Multiple Surfaces

Design of a Quadruped Wall-Climbing Robot (WCR) with a Three-Row Opposed Gripping Mechanism

Study Of A Bioinspired Wall-Climbing Robot: Contact Mechanism And Performance

Design and Analysis of a Wall-Climbing Robot Based on a Mechanism Utilizing Hook-Like Claws

Development of a wheeled wall‐climbing robot with an internal corner wall adaptive magnetic adhesion mechanism

Design and Study of a Biomimetic Wall-Climbing Robot with Spine Wheels and a Vacuum Suction Cup.

Survey on Bioinspired Adhesive Methods and Design and Implementation of A Multi-Mode Biomimetic Wall-Climbing Robot.

Design And Realization Of A Bio-Inspired Wall Climbing Robot For Rough Wall Surfaces

Grappling Claws for a Robot to Climb Rough Wall Surfaces: Mechanical Design, Grasping Algorithm, and Experiments.

A Bio-inspired Wall-climbing Robot with Claw Wheels and Adhesive Tracks

Design and Experimental Study of a Bioinspired Wall-Climbing Robot with Multi-Locomotion Modes

A Modular Biped Wall-Climbing Robot With High Mobility and Manipulating Function

Design of Two-Stage Passive Compliant of Wall-Climbing Robot with High Curvature Self-Adaptation

A Biomimetic Wheel-Track Wall-Climbing Robot Based on Rolling Adsorption Mechanism

DP-Climb: A Hybrid Adhesion Climbing Robot Design and Analysis for Internal Transition

AnyClimb-II: Dry-adhesive Linkage-Type Climbing Robot for Uneven Vertical Surfaces

A 6-DOF Humanoid Wall-Climbing Robot with Flexible Adsorption Feet Based on Negative Pressure Suction

Design, Simulation and Experimentation of a Biomimetic Wall-Climbing Robot with Tracked Spines