Abstract:Gecko-like robot (Geckobot), an important branch of bionic robotics, is a robot that simulates gecko's capacity to climb walls and ceilings. The work environment of the traditional wall-climbing robot is greatly limited as the moving structure and adsorption principle of the robot have nothing to do with the real gecko. However, the adsorption principle and moving mode of the real gecko can provide a new way to break through the restrictions of the traditional wall-climbing robot. Inspired by the moving mechanism of geckos, this paper develops the Geckobot with motile body. Two types of Geckobots are addressed: one with compliant flat bar as the body, and the other with prismatic joint as the body. The compliant body not only resembles the moving mode of the real gecko body, but also simplifies the Geckobot's structure. The prismatic joint body is used to adapt the change of body length in ground-to-wall transition. The gait planning on the plane and the transition between perpendicular intersectional planes is discussed, with an emphasis on the analysis of the kinematics degree of freedom (DOF) and body posture. Central pattern generator (CPG) neural network is realized in LabVIEW and utilized to control Geckobot's movement. The CPG scheme in LabVIEW is given, and how CPG is used to control Geckobot to turn or move forward is explored. Simulations are conducted in ADAMS to verify the feasibility of the structure design and gait planning and to acquire some parameters for practical Geckobot development. The experiment with Geckobot-I and Geckobot-II on their crawling capacity on the plane and the ground-to-wall transition finds that the robot can complete the crawling movement and ground-to-wall transition, verifying the feasibility of the structure design, gait planning and the CPG motion control. The Geckobot structure design approach, gait planning and the CPG motion control presented would be useful for the research on wall-climbing robots.

Design of a Quadruped Wall-Climbing Robot (WCR) with a Three-Row Opposed Gripping Mechanism

A Walking and Climbing Quadruped Robot Capable of Ground-Wall Transition: Design, Mobility Analysis and Gait Planning

A Three-Row Opposed Gripping Mechanism with Radial Configuration for Wall-Climbing Robots

A Wall-Climbing Robot Using Gecko-Inspired Dry Adhesives and Underactuated Modular Connecting Mechanism

Design and Experimental Study of a Bioinspired Wall-Climbing Robot with Multi-Locomotion Modes

DESIGN AND TESTING OF A WALL-CLIMBING ROBOT WITH UNDER-ACTUATED FORCE ADJUSTING MECHANISM

Design, Simulation and Experimentation of a Biomimetic Wall-Climbing Robot with Tracked Spines

Study Of A Bioinspired Wall-Climbing Robot: Contact Mechanism And Performance

A Three-row Opposed Gripping Mechanism with Bioinspired Spiny Toes for Wall-climbing Robots

Design and Analysis of Gecko-Like Robot

Design, Modeling and Experimentation of a Biomimetic Wall-climbing Robot for Multiple Surfaces

A Multi-Mode Biomimetic Wall-Climbing Robot

Design and Study of a Biomimetic Wall-Climbing Robot with Spine Wheels and a Vacuum Suction Cup.

Design And Experiment Of A Bioinspired Wall-Climbing Robot Using Spiny Grippers

Analysis, Design and Experiments of A Rough Wall Climbing Robot Based on Grabbing Claws

A 6-DOF Humanoid Wall-Climbing Robot with Flexible Adsorption Feet Based on Negative Pressure Suction

Design and Realization of A Flexible Claw of Rough Wall Climbing Robot

A gecko inspired wall-climbing robot based on electrostatic adhesion mechanism

Grappling Claws for a Robot to Climb Rough Wall Surfaces: Mechanical Design, Grasping Algorithm, and Experiments.

A Modular Biped Wall-Climbing Robot With High Mobility and Manipulating Function

A wall-climbing robot with gecko features