Abstract:This paper presents a study of bioinspired wall-climbing robot (WCR) using spiny toes. The first part of the paper describes a design of a flexible spiny toe inspired by the features of a typical wall-climbing insect Serica orientalis Motschulsky's tarsal system. A simple contact model of the spiny toe is proposed by considering the contact asperities as spheres. With the help of the finite element method (FEM), the stiffness matrices as well as the directional adhesive properties of the spiny toe are obtained. A single spiny toe and its array are fabricated via fast prototyping. The adhesive forces and pull-off positions of the single toe are measured with a homebuilt apparatus using displacement-control method under different compressive deformations. As for the spiny array, the effect of the dragging path on the adhesive forces is evaluated. The results show that, both the single toe and array exhibit directional adhesive features. The value of compressive deformation of the single toe influences the contacting angle, as a consequence the directional adhesive behavior is achieved. When forming an array with numerous spiny toes, the adhesive ability is strengthened, which is also affected by the random distribution of the surface asperity height.In the second part of the paper, a prototype of bioinspired WCR is designed and fabricated based on a fully understanding of the spiny contact mechanism. The robot has two feet, each of which has spring-actuated gripper. An inchworm gait is generated according to the trajectory planning of the feet. Using the proposed spiny arrays, the robot archives scaling on vertical and inverted rough surfaces, and can also transition between vertical and ceiling walls. The performance of the prototype of bioinspired WCR shows promising in developing an intelligent and maneuverable WCR system in practical applications.

Design and Study of a Biomimetic Wall-Climbing Robot with Spine Wheels and a Vacuum Suction Cup.

Development of a Bio-inspired Wall-Climbing Robot Composed of Spine Wheels, Adhesive Belts and Eddy Suction Cup

Design And Realization Of A Bio-Inspired Wall Climbing Robot For Rough Wall Surfaces

Design, Modeling and Experimentation of a Biomimetic Wall-climbing Robot for Multiple Surfaces

Design, Simulation and Experimentation of a Biomimetic Wall-Climbing Robot with Tracked Spines

Design and Experimental Study of a Bioinspired Wall-Climbing Robot with Multi-Locomotion Modes

A Multi-Mode Biomimetic Wall-Climbing Robot

Survey on Bioinspired Adhesive Methods and Design and Implementation of A Multi-Mode Biomimetic Wall-Climbing Robot.

A Biomimetic Wheel-Track Wall-Climbing Robot Based on Rolling Adsorption Mechanism

Study Of A Bioinspired Wall-Climbing Robot: Contact Mechanism And Performance

A Bio-inspired Wall-climbing Robot with Claw Wheels and Adhesive Tracks

Design And Experiment Of A Bioinspired Wall-Climbing Robot Using Spiny Grippers

Development of a wall climbing robot with wheel-leg hybrid locomotion mechanism

A Novel Worm-inspired Wall Climbing Robot with Sucker-microspine Composite Structure.

A Wheeled Wall-Climbing Robot with Bio-Inspired Spine Mechanisms

A wheeled wall-climbing robot with a climbing leg

A Leg-Wheel Wall-Climbing Robot Utilizing Bio-Inspired Spine Feet

Design of Permanent Magnetic Wheel-Type Adhesion-Locomotion System for Water-Jetting Wall-Climbing Robot

Design and Analysis of a Wall-Climbing Robot Based on a Mechanism Utilizing Hook-Like Claws

DESIGN AND TESTING OF A WALL-CLIMBING ROBOT WITH UNDER-ACTUATED FORCE ADJUSTING MECHANISM

Development and Experimental Study of Multi-Motion Model Robot with Wheel-Track Compound Structure