Abstract:Local temperature non-uniformity is a critical limit to power in large-area semiconductor lasers, playing a larger role than the conversion efficiency and temperature sensitivity in the most efficient modern devices. For the specific case of kilowatt-level edge-emitting diode laser bars, we demonstrate that laterally re-distributing current locally within each emitter using a customized micro-structuring of the electrical contact can flatten the thermal profile, based on the thermal design using COMSOL. The concept is demonstrated experimentally in adapted bars that contain eight broad-area emitters, each having wide (∼1100 μm) stripes and a 4 mm long resonator. Each emitter in the laser bar has an electrical contact layer that is electrically structured into parallel sub-contacts using implantation, essential to prevent lateral lasing, implemented here with a period of 29 μm. The width of the individual sub-contacts is narrowed in the device center and then monotonically increased toward the emitter edges to collect a higher proportion of heat at the edges, for a fivefold reduction in the thermal lens, despite a significant (20%) overall increase in electrical and thermal resistance. Two performance benefits are observed. First, the slope varies more slowly with average temperature, recovering (here) around half of the efficiency penalty from in-stripe temperature non-uniformity, and hence increasing the power conversion efficiency at 800 W optical output power by around 5%. Second, the lateral far field (95% power content) is narrowed by around 2° at 800 W optical output power, corresponding to a reduction of around half of the thermal contribution.

Micro-stripe Broad-Area Infrared Diode Lasers Without Deterioration of Output Power

Hybrid Integrated Narrow-Linewidth Semiconductor Lasers

Micro-structured lateral thermal lens for increased output power and narrowed beam divergence in kilowatt-class 9xx nm diode laser bars

Double-Junction Cascaded GaAs-Based Broad-Area Diode Lasers with 132W Continuous Wave Output Power

Spectrum Improvement of A High-Power Broad-Area Laser Diode Based on A Grating Semi-Feedback External Cavity Scheme

High Performance GaSb Based Digital-Grown InGaSb/AlGaAsSb Mid-Infrared Lasers and Bars

A High Power InGaN-Based Blue-Violet Laser Diode Array with a Broad-Area Stripe

High-efficiency and high-brightness broad area laserdiodes with buried implantation current blocking

High-power operation and lateral divergence angle reduction of broad-area laser diodes at 976 nm

A novel compact side-pumped bonded slab microchip laser

Diode pumped thin slab solid-state lasers

High brightness edge-emitting laser diode with wavelength self-organization in ultra-broad emitting area

Ultra-stable and low-divergence high-power antimonide light emitters with on-chip mode filter

High-Efficiency Diode Lasers at High Output Power

2 μm wave-band InGaAsSb/AlGaAsSb wide stripe MQW diode laser

High-power Single-Longitudinal-mode Double-Tapered Gain-Coupled Distributed Feedback Semiconductor Lasers Based on Periodic Anodes Defined by I-Line Lithography

High-efficiency edge-emitting laser diodes with oxidation confinement stripe structure

High-Power, Spectrally Stabilized, Near-Diffraction-Limited 970 Nm Laser Light Source Based on Truncated-Tapered Semiconductor Optical Amplifiers with Low Confinement Factors

990 Nm High-Power High-Beam-Quality DFB Laser with Narrow Linewidth Controlled by Gain-Coupled Effect

Extreme Double/Triple Asymmetric Epitaxial Structure Based Diode Lasers for High Powers and High Efficiencies

High Brightness Diode Laser Based on V-Shaped External Cavity and Beam-Waist Splitting Polarization Combining