Abstract:High level aerodynamic performance has been always expected for the axial flow compressors, and it is the consistent goal for axial flow compressor research. To achieve such a goal, the incorporation of CFD with optimization algorithm and surrogate model in blade geometry optimization has become a common practice and been used extensively. But the conventional surrogate model based on merely initial sampling often deviates from the real optimization problem during optimization process and then brings the optimizer to search locally, leading to the compromised optimal results. There are yet much to do to improve such optimization design method. An optimization method of surrogate model being updated by sequential sampling strategy is developed to achieve global optimal design geometry and permit high-level of aerodynamic performance for axial flow compressor. Preliminary Kriging surrogate model is constructed with a small number of selected DOE samplings, where the multiple optimization objective functions are obtained based on CFD simulations. The optimization is performed on the surrogate model with NSGA-II optimization algorithm and Pareto fronts successively obtained. To improve the surrogate model, the MSE (Mean Squared Error) criteria is used to select the refinement point from the newest Pareto front, and it is used to update and improve the surrogate model gradually during the optimization. Such adaptive feature of the surrogate model has enabled the optimizer to search globally. The method is used to optimize transonic Rotor 37 at design flow rate, where the blade shape is varied simultaneously in terms of sweep and lean, and the geometry is optimized. In the converged Pareto front, abundant candidate designs with significant performance gains are produced. Three points over the Pareto front are selected and analyzed to take an insight into the optimization effectiveness. Overall performance curves of optimized geometries are predicted over the entire flow range and they are significantly improved compared with the original ones. Significant overall performance gains arising from the blade optimization are supported by the improved flow behavior. The overall pressure ratio or efficiency gains of the optimized blades are attributed to the significant improvement in the radial distribution of aerodynamic parameters. Further research shows that the shock structure is changed and separation zone is reduced with the optimized blades, which are the major reasons for the improvement of the aerodynamic performance of optimized blades.

Analysis And Redesign Of The Fractured Blade In An Axial Compressor

Cause Analysis of the Rupture of the Blades of the Axial-Flow Compressors and Their Retrofit Design

Development of Mach Scale Rotors with Tailored Composite Coupling for Vibration Reduction

Effect and Mechanism of Roughness on the Performance of a Five-Stage Axial Flow Compressor

Research on the Influence of Crack Parameters on the Vibration Characteristics of Gas Turbine Compressor Blades

Blade Fracture Analysis of a Motor Cooling Fan in a High-Speed Reciprocating Compressor Package

Aerodynamic Analysis and Three-Dimensional Redesign of a Multi-Stage Axial Flow Compressor

Experimental study on blade containment with prefabricated crack method for single stage axial compressor

Design Method of Blade Passage for Axial Compressor by Lofting along Flow Direction

Numerical Research on Blade Dynamic Stress and Resonance under Different Rotor Circumferencial Positions in A Multi-stage Compressor

Analysis of Overall Aerodynamic Performance of Axial-Flow Compressor with Attenuated Blade Tip

Mechanism Analysis of the Influence of Blade Thickness Deviation on The Performance of Axial Flow Compressor

Axial flow compressor blade optimization through flexible shape tuning by means of cooperative co-evolution algorithm and adaptive surrogate model

Rotor Rupture Analysis Of 330da3 Centrifugal Compressor

Dynamic modeling and verification of rotating compressor blade with crack based on beam element

THREE-DIMENSIONAL BLADE SHAPE OPTIMIZATION FOR A TRANSONIC AXIAL FLOW COMPRESSOR THROUGH INCORPORATING SURROGATE MODEL AND SEQUENTIAL SAMPLING

Blade-end Treatment to Improve the Performance of Axial Compressors: an Overview

Impact of Defective Blades on Aerodynamic Performance of Transonic Compressor Rotor

Shape Optimization of Multi-Stage Axial Compressor Blades Using Adjoint Method with Static Pressure Constraint at Blade Row Interface

Transient Response Analysis of the Impact on the Rotor Blade

Peridynamics-based Analysis on Fracture Behaviors of a Turbine Blade Shroud