Abstract:Internal insulation defects of oil-immersed transformers are common because of flaws in both manufacturing and transportation process. Partial discharge (PD) activity caused by insulation defects may occur at rated voltage condition, leading to deterioration of material, which results in breakdown of insulation. Feature parameters of PD are closely related to the performance of insulation materials. Therefore, the parameter changes under long-term AC voltage due to the decrease in electrical properties of material. It is effective to acquire insulation condition of materials by analyzing changes in the parameters of PD. The present thesis studied partial discharge in insulation defect of oil-paper insulation under long-term AC voltage. The PD tests were performed on specimens of 1 mm thickness which was placed between the needle-to-plane electrodes in an oil cup. The specimen was impregnated with oil in vacuum with treatment of hot air drying in order to remove moisture. Feature parameters of PD, such as phase-resolved partial discharge analysis and equivalent time-frequency, were recorded during the test process. When the feature parameters of PD are significantly changed, some specimens were removed. The surface appearance of these specimens was studied by scanning electron microscope. The measurement provides a theoretical basis for the analysis of the changes in the feature parameters of PD, which is helpful for the estimation of remaining life of insulation material. Test results indicate that as the AC voltage applied, cellulose depolymerisation continuously happened at the surface of paper. Cellulose in some area is carbonized by PD, and particulates are created. As the PD developed, the discharge magnitude is increased at the beginning while decreased rapidly just before breakdown of the paper, and the distribution phase of discharges is almost unchanged.

Partial Discharge Characteristics Of Palm Fatty Acid Ester For Dissolved Gas Analysis

Gas Production Characteristics of Natural Ester Insulating Oil under Surface Partial Discharge

Study on Gas Production Difference of Natural Ester Insulating Oil under Partial Discharge Fault

A Dissolved Gas Analysis Investigation of Natural Ester under Electrical Breakdown Faults

Difference Analysis of Dissolved Gas in Natural Ester Insulating Fluids under Typical Electrical and Thermal Faults: an Experimental Study

Investigation of Saturation Moisture in the PD Behavior in the Biodegradable Ester Oil

Partial Discharge characteristics of mineral oil using needle — Plane and needle — Sphere electrode configuration base on pulse current measurement

Partial Discharge Characteristics over Differently Aged Oil/pressboard Interfaces

Partial discharge features and parameters characterization under typical defect geometries in oil-paper insulation: Considering the aging states

Research Progress of the Dissolved Gas Analysis in Synthetic Ester Insulating Oil under Electrical Faults

Partial discharge characteristics of oil/polypropylene film with a needle-plate electrode excited by impulse voltages

Gas Generation in Environment-Friendly Insulating Fluid under Partial Discharge and Sparking Faults

Partial-Discharge Characteristics of Free Spherical Conducting Particles under AC Condition in Transformer Oils

Evolution of Partial Discharge of Oil-Paper Insulation under Long-Term AC Voltage

Partial Discharge Suppression of the Oil-impregnated Paper by Depositing PTFE Thin Film via Magnetron Sputtering

Evolutionary Characteristics of Surface Discharge Within Oil-paper Insulation Under Different Thermally Aged Conditions

Research on partial discharge characteristic in oil-film insulation with pulse voltage

Partial Discharge Characteristics of Needle-plate Electrodes in Aging Oil-paper Insulation Under Combined AC-DC Voltage

Partial Discharge Characteristics over Oil/Paper Interface

Influence of Partial Discharge on Oil-Impregnated Insulation Pressboard Surface

Partial Discharge Statistical Characteristics of Oil-Paper Insulation under High Frequency Stress