RCF crack direction assessment in moving ferromagnetic material by DC electromagnetic NDT technique
Fei Yuan,Yating Yu,Jianbo Wu,JianPing Peng,Chao Jiang,Xifeng Fan,Jie Li
DOI: https://doi.org/10.1016/j.ndteint.2023.102882
2023-06-04
Abstract:The rolling contact fatigue (RCF) cracks that initiate from the surface of ferromagnetic materials in aviation bearings and high-speed rails are typically inclined at varying angles, posing a serious threat to safety. Therefore, a rapid and quantitative characterization of inclined cracks is of great importance. This paper investigates the distribution of magnetic fields and motion-induced eddy current (MIEC) in direct current (DC) electromagnetic non-destructive testing (NDT), and proposes an approach for measuring the direction of RCF cracks in moving ferromagnetic materials. The magnetic field and MIEC distributions in the moving ferromagnetic material are initially investigated, followed by a numerical simulation exploring the impact of crack inclination angle and depth on detection signals. The resulting relationship between crack propagation angle, depth, and detection signal is then obtained. Furthermore, a DC electromagnetic NDT platform has been designed and a quantitative detection approach for inclined cracks has been proposed and validated through experiments. Finally, a real scenario detection is carried out. The investigation presented in this paper demonstrates that the DC electromagnetic NDT technique is applicable not only for assessment RCF crack direction in moving ferromagnetic materials, such as rotating aviation bearings, but also for characterizing inclined cracks under conditions of fast relative motion between the probe and the ferromagnetic material (e.g., high-speed rail, pipeline, etc.).
materials science, characterization & testing