Abstract:The constitutive model and its material parameters largely determine the effectiveness and accuracy of the finite element (FE) simulation for metal cutting processes. However, even for the same workpiece material, there are multiple constitutive models with different predictive abilities that are applicable to the cutting simulation. Therefore, a method for evaluating the constitutive models based on the coupled Eulerian-Lagrangian (CEL) orthogonal cutting model incorporating the experimentally determined Coulomb friction coefficient is proposed. The evaluation method can effectively avoid the influences of chip separation criteria, damage models, and adaptive remeshing on the evaluation results with the ability to simulate material side flow. This paper evaluates Johnson-Cook (JC) and Zerilli-Armstrong (ZA) constitutive models, which are often applied in cutting simulations. Material parameters for these constitutive models are identified from the constitutive data of the primary or secondary shear zone in cutting tests. A series of FE simulations for orthogonal cutting of 42CrMo4 steel is carried out under various cutting conditions using different constitutive models. The simulated cutting forces, chip thickness, and average temperature over the tool-chip interface are compared with experimental results under the same cutting conditions. The conclusion is that no constitutive model is the most accurate for all predictions. Nevertheless, for 42CrMo4 steel, the ZA model with material parameters identified from constitutive data of the secondary shear zone has the best comprehensive predictive performance. The evaluation method contributes to selecting the most suitable constitutive model and conducting efficient cutting simulations. Furthermore, several feasible approaches for improving the constitutive models are presented through error analysis.

Determination of Constitutive Equation Parameters for Face Milling 3-D Simulation Via Pressure Bar and Orthogonal Cutting Tests

Determination of Constitutive Equation Parameters for Orthogonal Cutting Through Pressure Bar Tests and FEA Method

Finite Element Simulation Of High-Speed Cutting Alloy Cast Iron

Finite Element Simulation and Analysis of Aluminum Alloy Three-Dimensional Milling

Constitutive Model of Aviation Aluminum-Alloy Material in Metal Machining

Simulation of High-Speed Milling Process of Aerospace Aluminum Alloy

Three-dimensional numerical simulation for high speed milling of aerospace aluminum alloy

Simulation of 3d Chip Shaping of Aluminum Alloy 7075 in Milling Processes

Study on the Effect of Tool Inclination Angle in Machining Process Based on Three-Dimensional Thermo-Elastic-Plastic Model

Numerical Simulation Study on Milling Force for Aerospace Aluminum Alloy

Identification of Material Constitutive Parameters Using Orthogonal Cutting Tests and Genetic Algorithm

Finite Element Simulation of Serrated Chip Formation in High-speed Milling of A lloy Cast Iron

Experimental analysis and modeling of cutting power model

Method to obtain material model parameters used in three dimensional-simulating milling process

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

Evaluation of constitutive models used in orthogonal cutting simulation based on coupled Eulerian–Lagrangian formulation

Factor Analysis of Machining Parameters of Fiber-Reinforced Polymer Composites Based on Finite Element Simulation with Experimental Investigation

Three Dimensional Finite Element Simulation for Surface Residual Stress in End Milling Process

Coupled Thermo-mechanical Model for Metal Orthogonal Cutting Process and Finite Element Simulation

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

Multi-physics analytical modeling of the primary shear zone and milling force prediction