Abstract:The addition of Sc and Zr endows selective laser melted Al-Mg-based alloys with exceptional properties, which are predominately related to the Al3(ScxZr1-x) precipitates. The Al3(ScxZr1-x) precipitates formed in different stage of processing are identified as primary- Al3(ScxZr1-x) and aged- Al3(ScxZr1-x) according to different crystallographic characteristics. The experimental results show most of primary Al3(ScxZr1-x) particles located in the grain boundaries with incoherent interface and irregular shape, which is seldom reported in conventional casting. In contrast, the subsequent aging brings out more spherical Al3(ScxZr1-x) with coherent interface emerged in the grains. Combined the first-principle calculations with pseudo binary-diagram, we search the possible structures of Al3(ScxZr1-x) based on their formation enthalpy and binding energy, whose space group should be altered as Sc enters the Al3Zr (DO23) dispersoids. The most possible structure of primary Al3(ScxZr1-x) phase is evaluated as Al12Sc3Zr, and the calculated crystallo-graphic parameters are consistent with the experimental results. As the primary Al3(ScxZr1-x) is hard to act as nucleation particle, it can be inferred that the grain refinement resulting from the modification and hindrance of these particles during grain growth. A corresponding ultimate tensile strength and ductility is separately about 521.26 +/- 12.30 MPa and 15.83 +/- 0.94% after aging at 325 degrees C for 4 h. The results demonstrate the difference between the primary Al3(ScxZr1-x) and the aged Al3(ScxZr1-x) as well as the formation of primary Al3(ScxZr1-x), which offer a new idea to design new alloy for additive manufacturing.

Sc3+-Lu3+-Doped Alpha-Sialons

Sc3+–Lu3+‐Doped Α‐sialons

Effects of Sc on the Vacancy and Solute Behaviours in Aluminium

High-temperature strength and oxidation behavior of Sc3+/Lu3+ co-doped α-sialon

Preparation and Photoluminescence Properties of Eu3+-Doped Al2O3 Films on Silicon Substrates by the Sol-gel Method

Microstructure Characteristics And High-Temperature Performance Of In-Situ Reinforced Alpha-Sialon Ceramics

Composition controlled microstructure and mechanical properties of Yb/Lu co-doped SiAlON

Microstructure and Properties of Self-Reinforced Α-Sialon Ceramics Doped with Lu2O3

Effect of Post Heat Treatment on Microstructure and Mechanical Properties of Lu-doped Α-Sialons

Sintering Behavior, Microstructure and Mechanical Properties of Various Fluorine-Containing Y-SiAlON Glass-Ceramics

Microstructure of Different Rare-Earth-Doped α-Sialon Ceramics

Modification Mechanism And Growth Process Of Al-3(Sc, Zr) Particles In As-Cast Al-Si-Mg-Cu-Zr-Sc Alloy

High Infrared Transmission of Y3+–Yb3+-doped Α-Sialon

Effect of Different Rare-Earth on Microstructure and Properties of alpha-Sialon Ceramics

Multiscale Characterization of the Nucleation and 3D Structure of Al3Sc Phases Using Electron Microscopy and Synchrotron X-ray Tomography

Optical properties of in situ toughened ScLu–α-SiAlON

Synthesis And Characterization Of Single-Crystalline Phase Li-Alpha-Sialon

Microstructure and Mechanical Properties of Al–Si–Mg–Cu–Ti Alloy with Trace Amounts of Scandium

Mechanical Properties And Thermal Shock Resistance Of Refractory Self-Reinforced Alpha-Sialons Using Barium Aluminosilicate As An Additive

The Evolution and Characterizations of Al3(ScxZr1-x) Phase in Al–Mg-based Alloys Proceeded by SLM

Synthesis of alpha-Sialon by High Temperature Nitridation Reaction