Abstract:The fourth stage Automatic Depressurization System (ADS-4) enables controlled depressurization of reactor coolant system during small break LOCA. However, the coolant may be entrained into the containment through the ADS-4 branch line simultaneously, which reduces the coolant inventory in the primary loop and poses great threats to reactor core uncovering and melting. To make up for the deficiency of liquid entrainment database in advanced passive safety PWR, the Automatic Depressurization and Entrainment TEst Loop (ADETEL) modeled after AP1000 with a scaling ratio 1:5.6 was constructed, and the test data of ADS-4 entrainment and upper plenum entrainment were collected and analyzed. The experiments were conducted at atmospheric pressure with the maximum steam flow rate of 700kg/h. The entrainment processes were recorded by a high speed camera and interesting details were captured. A clear difference exists between ADETEL ADS-4 entrainment onset data and available correlations, which may caused by the differences in fluids physical properties, horizontal pipe flow conditions, determination methods of entrainment onset and geometries (e.g., diameter ratio between branch and hot leg, d/D). The upper plenum entrainment test data shows that the entrainment deposition effect of the reactor internals is smaller than the entrainment promotion effect due to the decrease of flow area and acceleration of steam in the upper plenum. Using the visualization information gained from experiments, the authors develop a model for predicting the entrainment onset in upward tee branch. The model is compared against the experimental data and shows good agreement.

Experimental and Simulative Investigation of Ads-4 Depressurization Process in Ap1000

Experimental Simulation of Liquid Entrainment in Ads-4 Depressurization Line in Ap1000

Experimental Simulation Analysis of ADS-4 Entrainment and Depressurization in AP1000

Experimental Investigation of Liquid Entrainment in ADS-4 Depressurization Line with Steam–water

Experimental Investigation of Liquid Entrainment in AP1000 ADS-4 Branch Line with Air–water

Experimental and Theoretical Research on Liquid Entrainment in AP 1000 ADS Blowdown Phase of SBLOCA

Experimental Investigation of ADS-4 Entrainment in AP1000 with Air-water

Experimental Investigation Of Liquid Entrainment In Ads-4 Branch Line

Experimental Investigation and Model Analysis on Upper Plenum Entrainment in AP1000

Experimental investigation of upper plenum entrainment in AP1000

Experimental Research of Liquid Entrainment through ADS-4 in AP1000

Analyses of Liquid Entrainment Through ADS-4 in AP1000 During a Typical Small Break LOCA Transient

Theoretical Investigation of Liquid Entrainment through ADS-4 in AP1000

Experimental and theoretical investigation of liquid entrainment through small-scaled ADS-4 in AP1000

Scaling Analysis of AP1000 ADS-4 Entrainment and Depressurization

Experimental Study on Effect of Pressure on Ads-4 Liquid Entrainment Characteristics in T-Junction

Comparative study on effect of air–water and steam–water mediums on liquid entrainment through ADS-4 in AP1000

CFD Modeling of Liquid Entrainment Through Vertical T-junction of Fourth Stage Automatic Depressurization System (ADS-4)

Development and Applicability Analyses of ADS-4 Entrainment Model in Large Advanced PWR

CFD Study on Onset of Liquid Entrainment Through ADS-4 Branch Line in AP1000

Experimental Investigation of Tee Branch Entrainment with Double Gas Inlets