Abstract:To investigate the influenced area of hydrogen chloride release and dispersion in different release modes,tank and pipeline release were simulated with ALOHA based on heavy gas model of DEGADIS.It can be found that hydrogen chloride concentration is decreasing with the increasing distance for the three tank release modes which including continuous release through small opening,release through big opening as well as instantaneous release at the same condition of leakage quantity and meteorology.The instantaneous release mode exhibits maximum influenced distances including the downwind distance and crosswind distance and also maximum influenced areas which including the dead area,serious injured area and slight injured area.It shows the fastest dispersion speed if compared to other two modes.Furthermore,the variations of the indoor and outdoor concentration with the dispersion time at the same location are different for the three tank release modes.In the mode of continuous release through small opening,the outdoor concentration increases to the maximum value and then roughly stays at the same level with little decrease,while the indoor concentration is always increasing with the time.In the modes of release through big opening and instantaneous release,the outdoor concentrations for both cases increase to the maximum value first,and then decrease promptly to zero after the transmission of hydrogen chloride vapor cloud moves towards the downwind direction.However,the indoor concentrations for both conditions present an increasing trend up to the maximum value.For the pipeline release modes,the influenced area of infinite source release mode is larger than that of limited source release mode,but it does not follow a linear function with leakage quantity.The results of simulation in the infinite source pipeline release mode and the limited source release mode are similar with that of continuous tank release mode through small opening and big opening,respectively.Through the comparison,it can be concluded that the tank instantaneous release mode and pipeline infinite source release mode exhibit bigger hazardous area than other modes.

Analysis On Releasing Of Hcl And Hcn In Fire Smoke

Analysis of Temporal and Spatial Distribution Characteristics of Ammonium Chloride Smoke Particles in Confined Spaces

The Release Pattern of Hcl from the Combustion of Pvc

Experimental and Kinetic Study of the Effects of CO2 and H2O Addition on PAH Formation in Laminar Premixed C2H4/O2/Ar Flames

A Thorough Theoretical Exploration of the Effect Mechanism of Fe on HCN Heterogeneous Formation from Nitrogen-Containing Char

Influence of Ventilation on the Release of CO_2 and CO in Fire Smoke

Experimental Study and Numerical Analysis on the Smoke Toxicity Transportation Within Typical Building

The Spatial Distribution of Toxicant Species in Fires in a Long Corridor

Hazard analysis of flue gases generate by coal mining conveyor belt fires

Fire dynamics simulation in a cable spreading room of a nuclear power plant using fire test results of heat release and toxic gas emission

The CO Concentrations Research Based on the Gaussian Plume Diffusion Model of the High-rise Building Fire Smoke

Transport of Smoke from Compartment Fires in Adjacent Corridor

Study on the Chemical Analysis Methods of Ignitable Residue in Fire Places

Establishment of a New Dynamic RRC Model in Smoke Toxicity Evaluation and Engineering Application

Computational Simulation of Smoke Temperature Diffusion in High-rise Buildings Fires

Research on Early Fire Smoke Movements and Detection Method in Stable Thermally Stratified Environments

Reliability study of fire suppression using dodecafluoro-2-methylpentan-3-one in small-sized confined space: From a temperature and gaseous products viewpoint

A review of chlorinated hydrocarbon combustion

Accident Consequence Analysis of Toxic Gas Leak in Different Release Modes

HEAT RELEASE RATE OF TYPICAL COMBUSTIBLE IN THE CONFINE

Experimental Study on Fire Smoke Movement in a Multi-Floor and Multi-Room Building