Abstract:Power-to-Gas technologies could play an important role in future energy systems, since they make it possible to store surplus electric energy from fluctuating renewable energy sources such as solar and wind. In Power-to-Gas concepts, the first step towards storage is the production of H2 by electrolysis, a possible further step is methanation. The Engler-Bunte-Institute, Fuel Technology at Karlsruhe Institute of Technology is conducting research on catalytic methanation in slurry bubble column reactors, which represent a highly load flexible reactor technology. To obtain experimental data at a semi-industrial scale a methanation pilot plant was built and commissioned. The plant is equipped with various safety valves, which may release the hazardous gases H2, CO and CH4 in the chemical reactor into the environment in the unintended case of overpressure, which may lead to a flammable and/or toxic cloud, threatening the safety of the workers and other humans near the plant. In this work, the safety evaluation of the accidental release in the methanation plant is performed using the numerical tool GASFLOW-MPI. Both toxicity and flammability of the hazardous gas cloud are analyzed and discussed. A local-global two-step simulation strategy, including a local computational model and a global computational model, is employed to calculate the hazardous gas dispersion efficiently and accurately. In the first step, a local detailed computational model with fine mesh is used to calculate the release mass flow through the exhaust tube and the complicated shock waves directly without any further assumption model such as the notional nozzle model. In the second step, a large-scale model with the relatively coarse mesh is chosen to efficiently predict the hazardous gas dispersion around the entire methanation plant. Moreover, the performances of two different types of exhaust pipes are compared and discussed, and the recommended exhaust pipe design is provided. The simulation results show that version B of the exhaust tubes is more recommendable from the viewpoint of safety.

Fire dynamics simulation in a cable spreading room of a nuclear power plant using fire test results of heat release and toxic gas emission

An Approach for Predicting the Toxicity of Smoke

Safety Barrier Performance Assessment by Integrating Computational Fluid Dynamics and Evacuation Modeling for Toxic Gas Leakage Scenarios

Investigation of combustion, smoke, and toxicity characteristics of flame-retardant and fiber-optic cables used in nuclear power plants

Damage mitigation method studies through simulation modeling of chemical accidents

Modeling Fire-Induced Smoke Spread and Carbon Monoxide Transportation in a Long Channel: Fire Dynamics Simulator Comparisons with Measured Data

CFD Simulation of Hazardous Gas Dispersion after Instantaneous Release and Safety Analysis

Numerical simulation of accidental released hazardous gas dispersion at a methanation plant using GASFLOW-MPI

A Study on the Improvement of Safety and Efficiency of Clean Rooms in Semiconductor Factories Through Real Fire Experiments

Investigating the Burning Characteristics of Electric Cables Used in the Nuclear Power Plant by Way of 3-D Transient Fds Code

Experimental Research on the Spatial Distribution of Toxic Gases in the Transport of Fire Smoke

Numerical Investigation on Heat and Mass Transfer of Volatile Flammable Gases Within the Nuclear Reactor Containment

Integrity Assessment of Cables Under Postulated Electrical Fire Accidents in a Zero-Power Research Reactor

Simulation and Analysis of Continuous Leakage and Diffusion of H_2 in Plant

Establishment of a New Dynamic RRC Model in Smoke Toxicity Evaluation and Engineering Application

Cable tray FIRE tests simulations in open atmosphere and in confined and mechanically ventilated compartments with the CALIF3S/ISIS CFD software

Numerical simulation of gas diffusion and explosion limit of VOCs in containment integrated leak rate test

Gas Box Exhaust Design Modification for Accidental Hazardous Gas Releases in Semiconductor Industry

Comparative CFD simulations of a hydrogen fire scenario

AN EXPERIMENTAL AND SIMULATION STUDY ON PLENUM CABLE FIRE

Numerical Simulation on the Optimization of the Ventilation Mode in Subway Tunnel Cable Smoldering Fire