Abstract:Micro-electromechanical systems and nano-electromechanical systems have attracted a great deal of attention in recent years. The flow and heat transfer behaviors of micromachines for separation applications are usually different from that of macro counterparts. In this paper, heat and mass transfer characteristics of rarefied nitrogen gas flows in microchannels are investigated using direct simulation Monte Carlo with improved pressure boundary conditions. The influence of aspect ratio and wall temperature on mass flowrate and wall heat flux in microchannels are studied parametrically. In order to examine the aspect ratio effect on heat and mass transfer behaviors, the wall temperature is set constant at 350 K and the aspect ratio of the microchannel varies from 5 to 20. The results show that as the aspect ratio increases, the velocity of the flow decreases, so does the mass flowrate. In a small aspect ratio channel, the heat transfer occurs throughout the microchannel; as the aspect ratio of the microchannel increases, the region of thermal equilibrium extends. To investigate the effects of wall temperature (Tw) on the mass flowrate and wall heat flux in a microchannel, the temperature of the incoming gas flow (Tin) is set constant at 300 K and the wall temperature varies from 200 K to 800 K while the aspect ratio is remained unchanged. Results show that majority of the wall heat flux stays within the channel entrance region and drops to nearly zero at the halfway in the channel. When TwTin, the molecular number density of the flow drops rapidly near the inlet and the temperature of the gas flow increases along the channel. As Tw increases, the flow becomes more rarefied, the mass flowrate decreases, and the resistance at the entrance region increases. Furthermore, when Tw>Tin, a sudden jump of heat transfer flux and temperature are observed at the exit region of the channel.

Investigation Of Flow And Heat Transfer Characteristics In Rectangular Small/Microchannels

Detailed Heat Transfer Measurements of Curved Fin Channels

HEAT TRANSFER CHARACTERISTICS OF WATER FLOWING THROUGH MICROCHANNELS

A numerical study of laminar convective heat transfer in microchannel with non-circular cross-section☆

An Experimental and Numerical Study of Forced Convection in A Microchannel with Negligible Axial Heat Conduction

Numerical investigation on slip-flow and heat transfer characteristics in the entrance region of elliptical microchannels

Experimental Study and Analysis About Flow and Heat Transfer in Micro-tubes

Single-phase flow and heat transfer in micro-channels

Experimental Investigation on Flow and Heat Transfer in Rough Microtube

Experimental and Numerical Analysis on Heat Transfer Performance of Slug Flow in Rectangular Microchannel

Experimental investigation on heat transfer of micro-cylinders-group at low reynolds number

Experimental Study of Single-Phase Flow and Heat Transfer in Rectangular Channels under Uniform and Non-Uniform Heating

Experimental Study on Thermal-Hydraulic Performance of Single-Phase Water Flow in Narrow Rectangular Channel

Three Dimensional Numerical Simulation Of Gas Heat Transfer In Rectangular Microchannels

Experimental and Numerical Studies of Liquid Flow and Heat Transfer in Microtubes

An experimental study of convective heat transfer in silicon microchannels with different surface conditions

Heat Transfer Enhancement and Entropy Generation of Nanofluids Laminar Convection in Microchannels with Flow Control Devices.

Numerical investigations of heat transfer augmentation in a microchannel heat sink with different shaped periodic reentrant cavities on channel sidewalls

Simultaneously developing flow and heat transfer in circular and parallel-plates microchannels with velocity slip and temperature jump

Using Direct Simulation Monte Carlo with Improved Boundary Conditions for Heat and Mass Transfer in Microchannels

Numerical Investigation Of Laminar Flow And Heat Transfer In Micro-Cylinder-Groups