Abstract:Journal of Low Frequency Noise, Vibration and Active Control, Ahead of Print. The panel cavity structure is one of the key components of the aircraft (vehicle) body and is among the main noise transmission pathways. Based on the modal superposition and Galerkin method, this paper realizes the theoretical model of sound insulation of the clamped, double-panel structure. The non-dominated sorting genetic algorithm-II (NSGA-II) is used to realize the sound insulation of the clamped double-panel structure. Through optimization, the fitting function and law of structural surface density and the optimized normal weighted sound insulation Pareto fronts were obtained. The results show that among the optimization, for the Pareto front cases, their double-panel thickness ratio h1/h2 is relatively far away from 1, and the corresponding cavity thickness H is relatively large. The influence of boundary conditions and size effects of lightweight sound insulation optimization are also discussed. The research on the influence of boundary and size indicates that the difference in the optimal weighted sound insulation Pareto fronts corresponding to the same surface density is mostly within the 1 dB range. Both the boundary and thickness of the panel will affect the frequency STL, while the boundary conditions or structure size changed, even the total thickness of panels needs to be the same, and the structure can also have similar weighted sound transmission loss (Rw) when the thickness ratio of the double-panel structure is chosen properly. The difference of material effects is also discussed. This research provides a method for the sound insulation optimization of clamped double-panel structures concerning the boundary and size effect.

Research On Low Noise Optimization Method Of Aircraft Cabin

Active Radiation Noise Control of Airplane's Cabin Using Piezoelectric Elements

Experimental Research of Noise Control in the Fighter Cockpit Using Microperforated Panel Absorber Structure

Noise Pollution Reduction Through a Novel Optimization Procedure in Passive Control Methods

Noise Reduction in Helicopter Cabins Using Microperforated Panel Composite Sound Absorption Structures

Acoustic Modelling and Analysis of Vehicle Interior Noise Based on Numerical Calculation

Low-noise structure optimization of a heavy commercial vehicle cab based on approximation model

Sound transmission loss optimization of clamped double-panels

Prediction of aircraft interior noise

Numerical Analysis and Measurement Techniques for Aircraft Cabin Noise Using JAXA's Jet-FTB "HISHO"

Coupled optimization of internal combustion engine radiated noise and interior noise

Study on active noise control inside automobile cabin

Research on Interior Noise Control of the Rear Seats in Vehicle

Acoustic Topology Optimization of a Truck Cab Based on Coupled Panel Contribution Analysis

A novel optimization method for maintaining aerodynamic performances in noise reduction design

Acoustic optimisation design for suspension characteristics based on the method of dynamic subsystem modification

An acoustic design procedure for controlling interior noise of high-speed trains

Research on prediction and optimization of low-frequency noise in loader cabs

Cabin Noise Source-Path Identification for AD-200 Ultralight Aircraft

Developments of Aeroacoustic Investigation on High-Lift Device for Large Aircrafts

Development of an innovative noise generation system for turboprop aircraft fuselage testing