Abstract:In order to study the characteristics of pile–rock action of steel pipe driven pile in coral reef limestone stratum, coral reef limestone at the China–Maldives Friendship Bridge site was selected to carry out indoor physical and model tests with red sandstone as the control group. The test outcomes indicate the following: (1) when substantial deformation is permitted, the coral reef limestone has a considerable strength dispersion, a low post-peak stress decrease rate, and a high residual strength, roughly 30% of the peak strength; (2) when the steel pipe pile penetrates the coral reef limestone, the pile top load shows an obvious sawtooth shape, and with the increase in penetration depth, the pile end load of the high-porosity rock sample gradually decreases, and the pile end load of the low-porosity rock sample gradually increases; (3) when the steel pipe pile is penetrated, the strain value of the red sandstone is about twice that of the coral reef limestone at the same position from the steel pipe pile. These findings indicate that the high porosity and heterogeneity cementation characteristics of the coral reef limestone make the extrusion effect during piling significantly less than that of the red sandstone. In addition, the steel pipe pile penetration process is numerically simulated using a four-dimensional discrete spring model method based on the multi-body damage criterion. The numerical simulation results further demonstrate that the pile-side rock fragmentation during steel pipe pile penetration is the primary reason for the lower bearing capacity of steel pipe piles in coral reef limestone stratums. This method provides a novel approach for studying the mechanical properties of reef limestone. The findings can serve as a guide for the design and construction of steel pipe piles in the reef limestone stratum.

Mechanical Properties of Steel Pipe Pile in Foundation Engineering

Statistical research on performance of prestressed concrete pipe piles

Construction Techniques for Reinforcement of Foundation of Existing Bridge Pile with Microsteel-Piped Pile

Behavior of Model Steel H-Pile-To-Pile-Cap Connections

Experimental Studies on Seismic Behavior of Steel Pile-to-Pile-Cap Connections

Study On Characteristics Comparison Between Rigid Pile In Composite Foundation With Rigid-Flexible Piles And That In Free State

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

Application of Large-Diameter Thin-Wall Cast-in-situ Concrete Pipe Piles in Ocean Structures

Seismic Behavior of Cft Column and Steel Pile Footings

Displacement and Force Analyses of Piles in the Pile-Caisson Composite Structure under Eccentric Inclined Loading Considering Different Stratum Features

Field Behavior of Driven Prestressed High-Strength Concrete Piles in Sandy Soils

Caisson-Bored Pile Composite Anchorage Foundation for Long-Span Suspension Bridge: Feasibility Study and Parametric Analysis

Engineering Characteristics Of Composite Foundation With Rigid-Flexible And Long-Short Piles

The engineering characteristic of precast tubular pile and mixing cement pile composite foundation for deep soft ground

Experimental Study on Bearing Capacity Behavior of Deep Large Diameter Cast-in-place Belled Pile

Studies on Bearing Characteristic of Open-Ended and Close-Ended Pipe Piles under High-Speed Railway Loadings

Load-bearing Performance of Caisson-Bored Pile Composite Anchorage Foundation for Long-Span Suspension Bridge: 1-G Model Tests

Construction Study of Steel Pipe Piles in Protection of Highway Bridge Piers in the East Artificial Island of Shen-Zhong Passage

FIELD SURVEY OF COMPOSITE FOUNDATION WITH RIGID PILES UNDER EMBANKMENT

Experimental and Numerical Analysis of Pile–Rock Interaction Characteristics of Steel Pipe Piles Penetrating into Coral Reef Limestone