The Ionospheric Delay Correction Methods in Sbas of Beidou
Shan Wang,Fanchen Meng,Bocheng Zhu
2015-01-01
Abstract:With the development of Global Navigation Satellite System (GNSS), the accuracy and integrity of GNSS are insufficient when applying in civil aviation. As a way of enhancement, Satellite Based Augmentation System (SBAS) can improve the positioning performance of civil aviation users among wide area. However, ionospheric delay error is the largest error source as well as the most difficult to estimate; also it is the key technology in SBAS. In the future, BeiDou Navigation Satellite System (BDS) will certainly develop its SBAS technology, while up to now the research on ionospheric delay correction technology of SBAS is deficient. Thus, this subject will research on the ionospheric delay correction technology and the integrity monitoring methods in SBAS of BDS.Under BDS, the most significant characteristic for ionospheric delay correction is that the ionospheric pierce points (IPPs) formed by GEO satellites are motionless, thus the IPPs in an update period could just reflect the ionospheric temporal variation. Since Kalman filter is the minimum mean square error estimation, it is adopted to generate more accurate Grid Ionospheric Vertical Delay (GIVD) at each usable ionospheric grid point (IGP). However, its calculation amount is somewhat complicated, thus when the IPPs around the IGP being estimated is not motionless, we use the planar fit method to calculate the GIVE. Through the simulated data as well as measured data from Crustal Movement Observation Network of China (CMONOC), we can conclude that the accuracy of ionospheric delay correction is improved, which contributes to the system accuracy and availability.Five sections are included in the paper and the corresponding contents are as follows:In the first section, firstly, we will introduce the ionospheric delay correction theory in SBAS, and then give a short description on SBAS development in the world and the ionospheric delay correction methods that advancing in Wide Area Augmntation System (WAAS), Multi-Functional Satellite Augmentation System (MSAS), European Geostationary Navigation Overlay Service (EGNOS), GPS and GEO Augmented Navigation (GAGAN) and System for Differential Corrections and Monitoring (SDCM). Finally, we will discuss on the ionospheric delay correction in BDS that has been planned and included in BDS Signal in Space Interface Control Document Version 2.0 (BDS-SIS-ICD-2.0).In the second section, as the basis of ionospheric delay correction in SBAS, we will research on the data processing in reference stations. 27 base stations in CMONOC are taken as the reference stations in SBAS, and their dual frequency GPS observation data are processed to generate the ionosperic delay on each IPP. After that we will discuss on the ionospheric delay spatial correlationship, which will be used for the subsequent ionospheric delay calculation on IGPs.In the third section, we will discuss on the ionospheric delay correction methods in SBAS of BDS. Since that the constellation constitution of BDS is special from that of GPS, it has 5 GEO satellites, whose IPPs formed by the reference station is moveless, we will use a filtering process in each update interval. The IGPs on the ionospheric thin shell model of BDS is different from that of WAAS, the IGPs are 5 degrees in longitude by 2.5 degrees in latitude, forming 320 IGPs over China mainland. In order to decrease the calculated amount, when the IPPs around the IGP being estimated are not motionless, we will use a planar fit method to calculate the ionospheric delay.In the fourth section, the model of ionospheric delay in BDS will be built, and the ionospheric delay correction algorithm will be analyzed and discussed through simulation. First of all, the 27 station selected from COMONC are treated as the reference station in SBAS of BDS. Then the users are chosen at several stations in CMONOC. Comparing the users' ionospheric delay and the interpolated value through IGPs, we can get the ionospheric delay correction error. Finally, the results through simulation are shown. The performance of ionospheric delay correction methods is evaluated.In the final section, the conclusion and research prospect on ionospheric delay in SBAS are shown. The filtering method can make more accuracy when there are motionless IPP around the IGP being estimated, while the planar fit method is of more simple calculation. This paper will give suggestions for the implement of SBAS in BDS, and also it will make progress for the SBAS implementation in China.