Abstract:In order to predict flow behavior and find the optimum hot working processing parameters for 5754 aluminum alloy, the experimental flow stress data obtained from the isothermal hot compression tests on a Gleeble-3500 thermo-simulation apparatus, with different strain rates (0.1⁻10 s⁻1) and temperatures (300⁻500 &deg;C), were used to construct the constitutive models of the strain-compensation Arrhenius (SA) and back propagation (BP) artificial neural network (ANN). In addition, an optimized BP⁻ANN model based on the genetic algorithm (GA) was established. Furthermore, the predictability of the three models was evaluated by the statistical indicators, including the correlation coefficient (R) and average absolute relative error (AARE). The results showed that the R of the SA model, BP⁻ANN model, and ANN⁻GA model were 0.9918, 0.9929, and 0.9999, respectively, while the AARE of these models was found to be 3.2499⁻5.6774%, 0.0567⁻5.4436% and 0.0232⁻1.0485%, respectively. The prediction error of the SA model was high at 400 &deg;C. It was more accurate to use the BP⁻ANN model to determine the flow behavior compared to the SA model. However, the BP⁻ANN model had more instability at 300 &deg;C and a true strain in the range of 0.4⁻0.6. When compared with the SA model and BP⁻ANN model, the ANN⁻GA model had a more efficient and more accurate prediction ability during the whole deformation process. Furthermore, the dynamic softening characteristic was analyzed by the flow curves. All curves showed that 5754 aluminum alloy showed the typical rheological characteristics. The flow stress rose rapidly with increasing strain until it reached a peak. After this, the flow stress remained constant, which demonstrates a steady flow softening phenomenon. Besides, the flow stress and the required variables to reach the steady state deformation increased with increasing strain rate and decreasing temperature.

Simulation Of Elastoplastic Behavior Of Casting Aluminum Alloy Using Artificial Neural Network

Simulation of High-Speed Milling Process of Aerospace Aluminum Alloy

Artificial neural network approach for mechanical properties prediction of as-cast A380 aluminum alloy

Prediction of Mechanical Properties by Artificial Neural Networks to Characterize the Plastic Behavior of Aluminum Alloys

Modeling Mechanical Properties of Aluminum Composite Produced Using Stir Casting Method

Construction of aluminum alloy constitutive model based on BP neural network and the study of non-isothermal hydroforming

A Self-Training-based Approach for Aluminum Alloy Casting Quality Prediction

A Novel Neural Network-based Alloy Design Strategy: Gated Recurrent Unit Machine Learning Modeling Integrated with Orthogonal Experiment Design and Data Augmentation

Hot Deformation Flow Behaviour Modelling of Cast-Extruded Al 7075 Alloy Using Arrhenius Equations and Artificial Neural Network

Modeling the Hot Deformation Behaviors of As-Extruded 7075 Aluminum Alloy by an Artificial Neural Network with Back-Propagation Algorithm

Composition design of high-performance copper alloy by coupling artificial neural network and genetic algorithm

Application of neural network in micromechanical deformation behaviors of Inconel 740H alloy

Hybrid Artificial Neural Network-Based Models to Investigate Deformation Behavior of AZ31B Magnesium Alloy at Warm Tensile Deformation

Competition of systematically optimized deep neural networks for the estimation of tensile behavior of aluminum-magnesium alloy

Artificial neural network prediction to the hot compressive deformation behavior of Al–Cu–Mg–Ag heat-resistant aluminum alloy

A Modified Back Propagation Artificial Neural Network Model Based on Genetic Algorithm to Predict the Flow Behavior of 5754 Aluminum Alloy

Microstructural evolution and constitutive analysis of Al-Mg-Zn-Er-Zr based on arrhenius-type and machine-learning algorithm

Artificial Neural Network and Genetic Algorithms for Discontinuously Reinforced Aluminum Composites Frictional Behaviour Prediction

Prediction of Mechanical Properties and Optimization of Friction Stir Welded 2195 Aluminum Alloy Based on BP Neural Network

Modeling of microstructure and constitutive relation during superplastic deformation by fuzzy-neural network

Prediction of the mechanical behavior of steel-aluminum flow drill screw joints using artificial neural network