Super-Hydrophobicity Of Zno/Zn-Al Ldh Micron And Nano Structures On Al Surface

Jiang Jian,Hu Xiao-Yan,Huang Xin-Tang

2007-01-01

Chinese journal of inorganic chemistry

Abstract:A multi-dimension bionic-like super-hydrophobic material, ZnO/Zn-Al LDH, was fabricated by modifying the A1 surface in alkaline conditions at room temperature. After coated by ZnO/Zn-Al LDH, the aluminum surface shows both micro- and nano-bionic-like structures of lotus leaves.

What problem does this paper attempt to address?

A Facile Method to Fabricate Superhydrophobic ZnO Nanostructure with Petal Effect

Min Zhao,Weili Zhu,Jianguo Lv,Yingying Zhang,Yuebing Cheng,Gang He,Miao Zhang,Xiaoshuang Chen,Zhaoqi Sun

DOI: https://doi.org/10.1007/s10854-016-5281-z

2016-01-01

Journal of Materials Science Materials in Electronics

Abstract:ZnO nanostructures were fabricated on glass substrate through a convenient deposition process. Firstly, ZnO seed layers were deposited on glass substrates through sol–gel method. Secondly, the ZnO nanostructures were then grown in a Teflon-lined stainless steel autoclave by immersing the seed layers into aqueous solution containing zinc nitrate hexahydrate and ammonia. The microstructures, morphologies, photoluminescence spectra and hydrophobicity of the nanostructures were analyzed by X-ray diffraction spectrometer, field emission scanning electron microscopy, laser micro-Raman spectrometer and contact angle apparatus, respectively. It can be seen that ZnO nanostructures display different surface morphologies such as ZnO nanorods parallel to the substrate surface, like-pencil ZnO nanorods and bending ZnO nanorods by altering the PH value. The largest intensity ratio of the UV/visible emission and the superhydrophobic surfaces (CA = 156°) with high adhesion can be achieved in the sample grown in the solutions with the PH value of 11.2. The high adhesion may be attributed to the strong capillary force and the ZnO nanostructures with petal effect can be explained by Wenzel model.
Fabrication of Hierarchical ZnO Architectures and Their Superhydrophobic Surfaces with Strong Adhesive Force.

Yanbo Li,Maojun Zheng,Li Ma,Miao Zhong,Wenzhong Shen

DOI: https://doi.org/10.1021/ic7021598

IF: 4.6

2008-01-01

Inorganic Chemistry

Abstract:Grid-structured ZnO microsphere arrays assembled by uniform ZnO nanorods were fabricated by noncatalytic chemical vapor deposition, taking advantage of morphologies of alumina nanowire pyramid substrates and ZnO oriented growth habits. Every ZnO microsphere (similar to the micropapilla on a lotus leaf surface) is assembled by over 200 various oriented ZnO nanorods (similar to the hairlike nanostructures on mircopapilla of a lotus leaf). This lotus-leaf-like ZnO micro-nanostructure films reveal superhydrophobicity and ultrastrong adhesive force to liquid. The realization of this hierarchical ZnO nanostructure film could be important for further understanding wettability of biological surfaces with micro-nanostructure and application in microfluidic devices.
Non-fluorinated superhydrophobic and micro/nano hierarchical Al doped ZnO film: the effect of Al doping on morphological and hydrophobic properties

jingfeng wang,yang li,yi kong,jia zhou,jinzhu wu,xiaohong wu,wei qin,zilong jiao,lixiang jiang

DOI: https://doi.org/10.1039/c5ra15952k

IF: 4.036

2015-01-01

RSC Advances

Abstract:This work reports on the systematic comparison of the crystalline structural, morphological and hydrophobic properties of ZnO and Al-doped ZnO (AZO) thin films fabricated by atomic layer deposition and the hydrothermal method. It was revealed that the surface wettability can be largely modified by Al doping in the zinc oxide film growth process. With Al doping, the morphology of the AZO films became more complex and rough. The water contact angle of a flower-like hierarchical ZnO film (123 +/- 4 degrees) was improved by about 40 degrees via Al doping to 160 +/- 4 degrees. We attributed the variation in surface hydrophobicity with Al doping to changes in the bond angle and distance between ZnO-H2O molecule. The computational simulations have been employed to verify the interfacial distinction between two main crystal orientations of AZO. This result suggests that Al doping can be considered a critical factor in changing the surface morphology of AZO as well as the hydrophobic properties. It is believed that the present route holds promise in the design and application of practical superhydrophobic materials.
Achieving of Bionic Super-Hydrophobicity by Electrodepositing Nano-Ni-pyramids on the Picosecond Laser-Ablated Micro-Cu-cone Surface

Zhaoyang Zhang,Qinming Gu,Wen Jiang,Hao Zhu,Kun Xu,Yunpeng Ren,Chi Xu

DOI: https://doi.org/10.1016/j.surfcoat.2019.02.037

2019-01-01

Abstract:The fabrication of a bionic super-hydrophobic metallic surface without any low-surface-energy modification is investigated, in which picosecond laser ablation, electropolishing and electrodeposition are used sequentially. The micro-cone structure is formed via laser ablation, and then the nano-pyramid structure is electrodeposited on the micro-cone structure, resulting in a hierarchical structure that is important for achieving super-hydrophobicity on an intrinsically hydrophilic material surface. In this study, the surface morphology and material removal mechanism are discussed with respect to the laser-ablated surface and the subsequent electropolished/electrodeposited surfaces. The condensation experiments results show that both types of surfaces are associated with relatively high contact angles (CAs) at normal temperatures, and the CAs are 147 degrees and 160 degrees, respectively. However, the CA on the laser-ablated surfaces at low temperatures decreases to as less as 107 degrees, which may be owing to the easy transition from Cassie state to a metastable state or even the Wenzel state, leading to a degraded hydrophobic surface. By contrast, the CA on the sequentially processed surfaces still maintains at 150 degrees, which should be attributed to the densely distributed nano-scale structures. The sequentially processed surfaces also show excellent long-term durability. Furthermore, this technique has been employed for fabricating super-hydrophobic surfaces with CM > 151 degrees and the sliding angles (SAs) < 8 degrees on the inclined surfaces with the inclination angle alpha < 30 degrees. Overall, the technique presented in this study supply a practical and reliable method for realizing the stable Cassie state and hence super-hydrophobicity on metallic surfaces.
Superhydrophobic surfaces based on ZnO-constructed hierarchical architectures

xiuqing hao,guang wu,li wang,danhui lv,yu luo,liang li,ning he

DOI: https://doi.org/10.1016/j.mee.2015.01.015

IF: 2.3

2015-01-01

Microelectronic Engineering

Abstract:Display Omitted A hydrothermal process of ZnO was proposed to obtain nanorods on planar and non-planar surfaces.The effects of process parameters on the sizes of ZnO nanorods were investigated.This process of ZnO was combined with other techniques to obtain hierarchical architectures.The superhydrophobicity was verified in the plexiglass tube and on the tin-bronze surface. A hydrothermal process of zinc oxide (ZnO), which was suitable for both planar surfaces and non-planar surfaces, was proposed to obtain nanopillars in this work. The effects of process parameters including the growth time and solution concentration on the morphological properties of ZnO nanorods were investigated by experiments. After process optimization, the ZnO arrays were well patterned in large area with vertically aligned orientation. This developed process of ZnO was then introduced to combine with other techniques to obtain various hierarchical structures on different substrates. Furthermore, the superhydrophobicity and self-cleaning effect were respectively verified on the plexiglass tube with ZnO nanopillars and the tin-bronze surface with hierarchical architectures.
Biomimetic fabrication and tunable wetting properties of three-dimensional hierarchical ZnO structures by combining soft lithography templated with lotus leaf and hydrothermal treatments

Shuxi Dai,Dianbo Zhang,Qing Shi,Xiao Han,Shujie Wang,Zuliang Du

DOI: https://doi.org/10.48550/arXiv.1303.3117

2013-03-13

Materials Science

Abstract:Three-dimensional hierarchical ZnO films with lotus-leaf-like micro/nano structures were successfully fabricated via a biomimetic route combining sol-gel technique, soft lithography and hydrothermal treatments. PDMS mold replicated from a fresh lotus leaf was used to imprint microscale pillar structures directly into a ZnO sol film. Hierarchical ZnO micro/nano structures were subsequently fabricated by a low-temperature hydrothermal growth of secondary ZnO nanorod arrays on the micro-structured ZnO film. The morphology and size of ZnO hierarchical micro/nano structures can be easily controlled by adjusting the hydrothermal reaction time. Wettability of hierarchical ZnO thin films was found to convert from superhydrophilicity to hydrophobicity after a low-surface-energy fluoroalkylsilane modification. Improved wetting properties from hydrophobic to superhydrophobic can be tuned by increasing the growth of ZnO nanorods structures.
Superhydrophobic or Superhydrophilic Surfaces Regulated by Micro-Nano Structured Zno Powders

Xingfu Zhou,Xuefeng Guo,Weiping Ding,Yi Chen

DOI: https://doi.org/10.1016/j.apsusc.2008.09.080

IF: 6.7

2008-01-01

Applied Surface Science

Abstract:The present study demonstrates a simple technique to decorate a surface for superhydrophobic or superhydrophilic properties by randomly coating an inorganic oxides powder. The superior properties are stable in air for more than half a year. The particulates of the powder are made from aligned single crystalline ZnO nanorods, which aggregate to microspheres with (0001¯) ends pointed outside of the spheres. The density of surface hydroxyls of ZnO nanorods and the micro-nanostructures of the particulates are responsible for their superior properties.
ChemInform Abstract: Preparation of Lotus‐Like Hierarchical Microstructures on Zinc Substrate and Study of Its Wettability.

Huijie Wang,Zhou Yang,Jing Yu,Yizhi Wu,Weijia Shao,Tongtong Jiang,Xiaoliang Xu

DOI: https://doi.org/10.1002/chin.201449219

2014-01-01

ChemInform

Abstract:AbstractSuperhydrophobic Zn/ZnO films are prepared by soaking HCl‐etched Zn sheets in pure warm water (60—90 °C, 0.5—12 h).
Fabrication of ZnO/Al2O3 core–shell nanostructures and crystalline Al2O3 nanotube

J HUANG,S LIU,Y WANG,Z YE

DOI: https://doi.org/10.1016/j.apsusc.2008.03.150

IF: 6.7

2008-01-01

Applied Surface Science

Abstract:We have demonstrated the crystalline ZnO–Al2O3 core–shell nanowire structure by atomic layer deposition (ALD) at a temperature 100°C. The core–shell structure could have potential applications in the fabrication of ZnO field effect transistor. After dissolving the ZnO core, shape defined, rigid and robust crystalline Al2O3 shelled nanostructures have been fabricated. Nanowire ZnO nanostructures have been replicated by alumina shell. This is one of the most effective techniques for producing core–shell or shell/hollowed nanostructures of any desired objects. The Al2O3 shelled nanostructures could have potential applications as space confined nanoreactors, drug delivery, nanofluidic channels and optical transmitting.
Synthesis of zinc hydroxyl acetate nanosheet-assembled honeycomb-like and flower-like structures by chemical bath deposition method for the construction of hydrophobic surfaces

Rulin Dong,Jingyu Tan,Yiyi Ji,Zhixin Qi,Zhidong Chen,Yukai Chen

DOI: https://doi.org/10.1016/j.tsf.2024.140569

IF: 2.1

2024-11-13

Thin Solid Films

Abstract:Layered zinc hydroxyl acetate (LZHA) nanosheet-assembled honeycomb-like and flower-like structures were synthesized by a chemical bath deposition method using aqueous zinc acetate solution as the bath solution and a porous ZnO coating as the substrate. The morphology of LZHA architectures growing on the surface of the substrate depends on the type of LZHA nucleation. The homogeneous nucleation facilitates the adsorption of crumpled LZHA nanosheets generated in the solution onto the substrate surface, whereas heterogeneous nucleation promotes the formation of flat LZHA nanosheets on the substrate surface. The crumpled and flat LZHA nanosheets serving as the seeds undergo cyclic "growth-division" processes to evolve into LZHA nanosheet-assembled honeycomb-like and flower-like structures, respectively. The hierarchical architecture features of the LZHA honeycombs and flowers can be topologically inherited without any crack and collapse when converted into ZnO by calcination. The LZHA honeycomb-like and Ag nanoparticle modified ZnO flower-like structures were characterized by a scanning electron microscope, field-emission scanning electron microscope, energy dispersive X-ray spectrometer and X-ray diffractometer. The synthesized ZnO honeycomb-like and flower-like structures show excellent hydrophobic properties owning to the appropriate roughness provided by the hierarchical structures. In particular, the surface assembled by ZnO honeycombs derived from their LZHA precursors with deposition time of 4 h shows a higher water contact angle of 162.3°. In addition, the Ag nanoparticle modification on the petals of ZnO flowers results in the formation of multi-scale rough surfaces, and thus increases the water contact angle. The synthesized superhydrophobic surfaces exhibit promising applications in fields such as anti-icing, anti-corrosion and reducing fluidic drag.

materials science, multidisciplinary,physics, applied, condensed matter, coatings & films
Photoluminescent Hierarchical Zno Micro‐flower and Its Surface Wettability

X. B. Ji,W. C. Lu,H. P. Ma

DOI: https://doi.org/10.1002/crat.201200276

2012-01-01

Crystal Research and Technology

Abstract:The flower‐like ZnO with micro‐nano hierarchical structure is successfully obtained by a simple hydrothermal synthesis, using sodium dodecyl benzene sulfonate (SDBS) as a structure direct agent. The resulted ZnO micro‐flowers are very uniform in morphology with particle sizes around 1 µm. A number of techniques, including X‐ray diffraction (XRD), field emission scan electron microscopy (FESEM), energy‐dispersive spectroscopy (EDS), fourier transform infrared (FTIR) spectra and thermogravimetry analysis (TGA), are used to characterize the obtained ZnO. The self‐assemble of ZnO nano‐sheets under the direction of SDBS leads to the formation of ZnO micro‐flowers. The room temperature photoluminescence property of the obtained flower‐like ZnO exhibits a broad visible light emission. The surface of as‐made ZnO shows a very hydrophilic property, while the special micro‐nano hierarchical structure enables the ZnO micro‐flower a superhydrophobic surface after modification of fluoroalkylsilane.
Wetting Behavior and Drag Reduction of Superhydrophobic Layered Double Hydroxides Films on Aluminum

Haifeng Zhang,Liang Yin,Xiaowei Liu,Rui Weng,Yang Wang,Zhiwen Wu

DOI: https://doi.org/10.1016/j.apsusc.2016.01.208

IF: 6.7

2016-01-01

Applied Surface Science

Abstract:We present a novel method to fabricate Zn-Al LDH (layered double hydroxides) film with 3D flowerlike micro-and nanostructure on the aluminum foil. The wettability of the Zn-Al LDH film can be easily changed from superhydrophilic to superhydrophobic with a simple chemical modification. The as-prepared superhydrophobic surfaces have water CAs (contact angles) of 165 +/- 2 degrees. In order to estimate the drag reduction property of the surface with different adhesion properties, the experimental setup of the liquid/solid friction drag is proposed. The drag reduction ratio for the as-prepared superhydrophobic sample is 20-30% at low velocity. Bearing this in mind, we construct superhydrophobic surfaces that have numerous technical applications in drag reduction field. (C) 2016 Elsevier B.V. All rights reserved.
Facile Synthesis of Superhydrophobic Surface of ZnO Nanoflakes: Chemical Coating and UV-induced Wettability Conversion

Lujun Yao,Maojun Zheng,Changli Li,Li Ma,Wenzhong Shen

DOI: https://doi.org/10.1186/1556-276x-7-216

2012-01-01

Nanoscale Research Letters

Abstract:This work reports an oriented growth process of two-dimensional (2D) ZnO nanoflakes on aluminum substrate through a low temperature hydrothermal technique and proposes the preliminary growth mechanism. A bionic superhydrophobic surface with excellent corrosion protection over a wide pH range in both acidic and alkaline solutions was constructed by a chemical coating treatment with stearic acid (SA) molecules on ZnO nanoflakes. It is found that the superhydrophobic surface of ZnO nanoflake arrays shows a maximum water contact angle (CA) of 157° and a low sliding angle of 8°, and it can be reversibly switched to its initial superhydrophilic state under ultraviolet (UV) irradiation, which is due to the UV-induced decomposition of the coated SA molecules. This study is significant for simple and inexpensive building of large-scale 2D ZnO nanoflake arrays with special wettability which can extend the applications of ZnO films to many other important fields.
Superhydrophobic Multi-Scale ZnO Nanostructures Fabricated by Chemical Vapor Deposition Method

Ming Zhou,Chengheng Feng,Chunxia Wu,Weiwei Ma,Lan Cai

DOI: https://doi.org/10.1166/jnn.2009.m34

2009-01-01

Journal of Nanoscience and Nanotechnology

Abstract:The ZnO nanostructures were synthesized on Si(100) substrates by chemical vapor deposition (CVD) method. Different Morphologies of ZnO nanostructures, such as nanoparticle film, micropillar and micro-nano multi-structure, were obtained with different conditions. The results of XRD and TEM showed the good quality of ZnO crystal growth. Selected area electron diffraction analysis indicates the individual nano-wire is single crystal. The wettability of ZnO was studied by contact angle admeasuring apparatus. We found that the wettability can be changed from hydrophobic to super-hydrophobic when the structure changed from smooth particle film to single micro-pillar, nano-wire and micro-nano multi-scale structure. Compared with the particle film with contact angle (CA) of 90.7 degrees, the CA of single scale microstructure and sparse micro-nano multi-scale structure is 130-140 degrees, 140-150 degrees respectively. But when the surface is dense micro-nano multi-scale structure such as nano-lawn, the CA can reach to 168.2 degrees. The results indicate that microstructure of surface is very important to the surface wettability. The wettability on the micro-nano multi-structure is better than single-scale structure, and that of dense micro-nano multi-structure is better than sparse multi-structure.
Ni-Al Layered Double Hydroxides (ldhs) Coated Superhydrophobic Mesh with Flower-Like Hierarchical Structure for Oil/water Separation

Luhong Zhang,Ziqiang Gong,Bin Jiang,Yongli Sun,Zhenxing Chen,Xiang Gao,Na Yang

DOI: https://doi.org/10.1016/j.apsusc.2019.06.064

IF: 6.7

2019-01-01

Applied Surface Science

Abstract:Recently, there is an urgent demand to remove oil and organic solvents with low surface tension from oily wastewater, which promotes the application of interface biomimetic materials in oil/water separation. In our work, a novel NiAl LDHs coated superhydrophobic and superoleophilic stainless steel mesh (SS-SSM) with efficient oil/water separation performance was successfully prepared. The 3D flower-like structure intercalated by LDHs monocrystalline flakes was anchored on metallic wires in urea solution by a hydrothermal method and decorated with low surface energy molecules. The as-prepared mesh exhibited perfect superhydrophobicity with water contact angle of 156° and sliding angle of 5°, thus achieving self-cleaning property. In addition, the separation efficiency for a series of oil/water mixtures of the coated mesh was studied, which was up to 98% for most sample oils. More importantly, even treated under severer conditions such as ultrasonic, abrasion and chemical etching solution, the as-prepared meshes possessed good reproducibility in terms of contact angles and separation efficiencies. It is expected that the designed mesh could provide a b brand-new method for superhydrophobic surface coating, making it a potential functional material for self-cleaning, anti-corrosion, fluid drag reduction and oil/water separation.
Preparation and Properties of ZnS Superhydrophobic Surface with Hierarchical Structure

Lujun Yao,Maojun Zheng,Shuanghu He,Li Ma,Mei Li,Wenzhong Shen

DOI: https://doi.org/10.1016/j.apsusc.2010.10.098

IF: 6.7

2011-01-01

Applied Surface Science

Abstract:A novel ZnS hierarchical structure composed of nanorod arrays with branched nanosheets and nanowires grown on their upside walls, was synthesized over Au-coated silicon substrate via chemical vapor deposition technique. Contact angle and sliding angle of this hierarchical film with no surface modification were measured to be about 153.8 degrees and 9.1 degrees for 5 mu l water droplets. Self-cleaning behavior and dynamic water-repelling performance were clearly demonstrated. In addition, electrowetting transition phenomenon from superhydrophobic to hydrophilic state happened when a critical bias similar to 7.0 V was applied. Below this threshold voltage, the contact angle change is little. This work for the first time reports the creation of ZnS superhydrophobic surface and could enrich its research field as surface functional materials. (C) 2010 Elsevier B.V. All rights reserved.
Synthesis of Hierarchical Flower-Like Particles and Its Application As Super-Hydrophobic Coating

Xinzhi Wang,Yurong He,Xing Liu,Jiaqi Zhu

DOI: https://doi.org/10.1016/j.powtec.2017.07.005

IF: 5.64

2017-01-01

Powder Technology

Abstract:Zinc oxide (ZnO) nanostructures present great potential for application in optical, sensing, and piezoelectric devices owing to their nanometric diameter and large specific surface area. To obtain well-designed and well-constructed ZnO micro/nano-architecture via a facile and inexpensive procedure is still a major challenge. Here, a sonochemical method was proposed for the synthesis of hierarchical flower-likepolystyrene-ZnOmicro/nano-particles (HFPs). Abundant thermal energy for the aqueous hydrothermal growth of ZnO nanorods (NRs) and sufficient ultrasonic irradiation to maintain the homogeneous dispersion of the produced particles were supplied by the sonochemical process. Moreover, the effects of precursor concentration, reaction time, and molar ratio of Zn(NO3)2 to hexamethylenetetramine (HMT) on the synthesis of hierarchical flower-likeparticles were investigated. The mechanism of the hierarchical flower-like particle formation was presented, and the best morphology was obtained at a concentration of 25mM Zn(NO3)2 and 25mM HMT with a reaction time of 2h. Finally, the potential of using HFPs as superhydrophilic or superhydrophobic coating was investigated to tailor the wettability of a surface.
Superhydrophobic Surfaces Via Controlling the Morphology of ZnO Micro/nano Complex Structure

Gong Mao-Gang,Xu Xiao-Liang,Yang Zhou,Liu Yan-Song,Liu Ling

DOI: https://doi.org/10.1088/1674-1056/19/5/056701

2010-01-01

Chinese Physics B

Abstract:ZnO micro/nano complex structure films, including reticulate papillary nodes, petal-like and flake-hole, have been self-assembled by a hydrothermal technique at different temperatures without metal catalysts. The wettability of the above film surfaces was modified with a simple coating of heptadecafluorodecyltrimethoxy-silane in toluene. After modifying, the surface of ZnO film grown at 50 °C was converted from superhydrophilic with a water contact angle lower than 5° to superhydrophobic with a water contact angle of 165°. Additionally, the surface of reticulate papillary nodes ZnO film grown at 100 °C had excellent superhydrophobicity, with a water contact angle of 173° and a sliding angle lower than 2°. Furthermore, the water contact angle on the surface of petal-like and flake-hole ZnO films grown at 150 °C and 200 °C were found to be 140° and 120°, respectively. The wettability for the samples was found to depend strongly on the surface morphology which results from the growth temperature.
Bionic Superhydrophobic and Drag‐Reduction Properties on ZnO‐Nanostructured Functional Surfaces

Ming Zhou,Jian Li,Cheng-Cheng Feng,Chun-Xia Wu,Run Yuan,Lan Cai

DOI: https://doi.org/10.1002/cvde.200904276

2010-01-01

Chemical Vapor Deposition

Abstract:Communication: This manuscript reports the drag reduction of the surface coated with Zinc Oxide nanostructures. The surface is prepared by chemical vapor deposition on a silicon substrate and characterized by scanning electron microscopy. Then the slip lengths of the surface in three liquids with different viscosities are measured using a rheometer system.
Superhydrophobicity of Hierarchical Zno Nanowire Coatings

Maogang Gong,Zhou Yang,Xiaoliang Xu,Daniel Jasion,Shin Mou,Hongdi Zhang,Yunze Long,Shenqiang Ren

DOI: https://doi.org/10.1039/c3ta14102k

IF: 11.9

2014-01-01

Journal of Materials Chemistry A

Abstract:Hierarchical superhydrophobic surfaces were constructed by growing various lengths of ZnO nanowires on micro-scale Si pyramids produced by chemical etching. The nano-size effect on wettability of nano/micro complex structures has been investigated by adjusting the ZnO nanowire length. As the nanowire length on the Si pyramid surface increases, a transition from the Wenzel state to the Cassie state occurs. A water contact angle as high as 169.1 degrees, with a contact angle hysteresis less than 1.3 degrees, was formed by growing ZnO nanowires of a suitable length on Si micro-pyramids. Compression and impact experiments further demonstrate the robust superhydrophobicity of ZnO nanowire-Si pyramid hierarchical structures.

Super-Hydrophobicity Of Zno/Zn-Al Ldh Micron And Nano Structures On Al Surface

A Facile Method to Fabricate Superhydrophobic ZnO Nanostructure with Petal Effect

Fabrication of Hierarchical ZnO Architectures and Their Superhydrophobic Surfaces with Strong Adhesive Force.

Non-fluorinated superhydrophobic and micro/nano hierarchical Al doped ZnO film: the effect of Al doping on morphological and hydrophobic properties

Achieving of Bionic Super-Hydrophobicity by Electrodepositing Nano-Ni-pyramids on the Picosecond Laser-Ablated Micro-Cu-cone Surface

Superhydrophobic surfaces based on ZnO-constructed hierarchical architectures

Biomimetic fabrication and tunable wetting properties of three-dimensional hierarchical ZnO structures by combining soft lithography templated with lotus leaf and hydrothermal treatments

Superhydrophobic or Superhydrophilic Surfaces Regulated by Micro-Nano Structured Zno Powders

ChemInform Abstract: Preparation of Lotus‐Like Hierarchical Microstructures on Zinc Substrate and Study of Its Wettability.

Fabrication of ZnO/Al2O3 core–shell nanostructures and crystalline Al2O3 nanotube

Synthesis of zinc hydroxyl acetate nanosheet-assembled honeycomb-like and flower-like structures by chemical bath deposition method for the construction of hydrophobic surfaces

Photoluminescent Hierarchical Zno Micro‐flower and Its Surface Wettability

Wetting Behavior and Drag Reduction of Superhydrophobic Layered Double Hydroxides Films on Aluminum

Facile Synthesis of Superhydrophobic Surface of ZnO Nanoflakes: Chemical Coating and UV-induced Wettability Conversion

Superhydrophobic Multi-Scale ZnO Nanostructures Fabricated by Chemical Vapor Deposition Method

Ni-Al Layered Double Hydroxides (ldhs) Coated Superhydrophobic Mesh with Flower-Like Hierarchical Structure for Oil/water Separation

Preparation and Properties of ZnS Superhydrophobic Surface with Hierarchical Structure

Synthesis of Hierarchical Flower-Like Particles and Its Application As Super-Hydrophobic Coating

Superhydrophobic Surfaces Via Controlling the Morphology of ZnO Micro/nano Complex Structure

Bionic Superhydrophobic and Drag‐Reduction Properties on ZnO‐Nanostructured Functional Surfaces

Superhydrophobicity of Hierarchical Zno Nanowire Coatings