Abstract:<p>Prestressed concrete cylinder pipes (PCCPs) are widely used in large-scale water conveyance projects. It is important to study the mechanical properties and loading response of PCCPs to ensure trouble-free operation. There were insufficient test data pertaining to the deformation of the concrete cores (including the inner and the outer concrete core), the prestressing wire, the mortar coating, especially the steel cylinder. In this paper, a full-scale test was performed on a PCCP under internal water pressure through fiber Bragg grating (FBG) sensing technology. The test results showed that the state of PCCPs would reach three limit-states successively. Firstly, the strains of the concrete cores, the prestressing wire, the steel cylinder and the mortar coating increased linearly with the growth of the internal water pressure. The cracks in the concrete cores indicated the beginning of the serviceability limit-state. The corresponding pressure is 1.8 MPa. The growth of the internal water pressure primarily affected the steel cylinder and the prestressing wire during the continuous period. When the steel cylinder yielded at the pressure of 2.25 MPa, the pipe reached its elastic limit-state. At last, the strength of the pipe decreased obviously as the cracks propagated throughout the concrete cores. The pipe would come to the strength limit-state until the prestressing wire yielded. The test results found that the internal water pressure relieved final prestress of the inner concrete core was different from that of the outer concrete core in the embedded-cylinder pipe (ECP). It was also proved that FBG sensing technology could be the continuous monitoring system for the condition assessment of PCCPs. In particular, the test results demonstrated that the appropriate quality of materials and proper operation guaranteed trouble-free operation of PCCPs. The objective of this research is to provide experimental references for the application of PCCPs and push back safety assessment of this type of large-diameter pipes.</p>

Performance Monitoring of Extreme Large-Diameter Prestressed Concrete Cylinder Pipe with Distributed Fiber Optic Sensors

Towards an Automated Crack Monitoring using Distributed Fiber Optic Sensors

Experimental Research on Monitoring Concrete Expansion and Cracking Induced by Corrosion based on Distributed Optical Fiber Sensor

Surface Crack Detection in Prestressed Concrete Cylinder Pipes Using BOTDA Strain Sensors

An Optical Fiber Sensor Method for Simultaneously Monitoring Corrosion and Structural Strain Induced by Loading

Online Monitoring of Wire Breaks in Prestressed Concrete Cylinder Pipe Utilising Fibre Bragg Grating Sensors

A Novel Method of Embedding Distributed Optical Fiber Sensors for Structural Health Monitoring

Concrete Pavement Monitoring with Ppp-Botda Distributed Strain and Crack Sensors

Experimental Research on Corrosion-Induced Cracking Monitoring Based on Optical Fiber Sensor

Distributed fiber optic sensing for internal strain monitoring in full life cycle of concrete slabs with BOFDA technology

Mechanical properties and loading response of prestressed concrete cylinder pipes under internal water pressure

Low-coherent fiber-optic interferometry for in situ monitoring the corrosion-induced expansion of pre-stressed concrete cylinder pipes

Distributed strain measurement of a large-scale reinforced concrete beam-column assembly under cyclic loading

Deformation monitoring and numerical simulation of prestressed concrete beam with local corrosion and fracture of prestressed steel

Multi-parameter Monitoring for Steel Pipe Structures Using Monolithic Multicore Fibre Based on Spatial-Division-multiplex Sensing

Spiral Deployment of Optical Fiber Sensors for Distributed Strain Measurement in Seven-Wire Twisted Steel Cables, Post-Tensioned against Precast Concrete Bars

Monitoring of Prestressing Forces in Cross-Tensioned Concrete Pavements During Construction and Maintenance Based on Distributed Optical Fiber Sensing

Application of a Distributed Optical Fiber Sensing Technique in Monitoring the Stress of Precast Piles

Full Scale Strain Monitoring of A Suspension Bridge Using High Performance Distributed Fiber Optic Sensors

Experimental Study on Crack Monitoring of PC Structures with Pulse-prepump BOTDA-based Distributed Fiber Optic Sensors

Structural Performance Monitoring of Buried Pipelines Using Distributed Fiber Optic Sensors