High Strain Rate Compressive Behavior Of Cellular Aluminum Alloys

Xq Cao,Zh Wang,Hw Ma,Lm Zhao,Gt Yang

2005-01-01

Abstract:In general, the mechanical properties of foam materials mainly depend on their relative density, but in fact the specimen size and cell structure also affect the properties. In this paper the high strain rate compressive behavior of a kind of cellular aluminum alloys with different relative densities and cell sizes has been investigated using the split Hopkinson pressure bar (SHPB). For comparison, the quasi-static compressive behavior has been tested. The influence of the specimen height, relative density and the cell size on the quasi-static and high strain rate compressive behavior (such as the elastic modulus, plastic modulus, plastic collapse strength and the "plateau" length) as well as the energy absorption characteristic has been studied and some new results have been obtained. It is found that the linear-elastic modulus of the aluminum foam used in the study is not only dependent on the relative density but also dependent on the cell size of the foam,. In the meantime the plastic collapse strength depends also on both the relative density and cell size of aluminum foam. The plastic collapse strength increased as the relative density increased under the same cell size. The plastic collapse strength increased when the cell size increased from 0.9mm to 1.6mm. The specimen size (height) mainly affected the "plateau" length, the larger the height is, the longer the "plateau" length is. So the effect of specimen height should be taken into consideration in practical applications. The strain rate also influenced the property of studied aluminum foam, and its effect is becoming apparent when it is high up to 10(3)s(-1).