Abstract:This paper presents vibration-based damage detection (VBDD) for testing a steel-concrete composite bridge deck in a laboratory using both model-based and non-model-based methods. Damage that appears on a composite bridge deck may occur either in the service condition or in the loading condition. To verify the efficiency of the dynamic test methods for assessing different damage scenarios, two defect cases were designed in the service condition by removing the connection bolts along half of a steel girder and replacing the boundary conditions, while three damage cases were introduced in the loading condition by increasing the applied load. A static test and a multiple reference impact test (MRIT) were conducted in each case to obtain the corresponding deflection and modal data. For the non-model-based method, modal flexibility and modal flexibility displacement (MFD) were used to detect the location and extent of the damage. The test results showed that the appearance and location of the damage in defect cases and loading conditions can be successfully identified by the MFD values. A finite element (FE) model was rationally selected to represent the dynamic characteristics of the physical model, while four highly sensitive physical parameters were rationally selected using sensitivity analysis. The model updating technique was used to assess the condition of the whole deck in the service condition, including the boundary conditions, connectors, and slab. Using damage functions, Strand7 software was used to conduct FE analysis coupled with the MATLAB application programming interface to update multiple physical parameters. Of the three different FE models used to simulate the behavior of the composite slab, the calculated MFD of the shell-solid FE model was almost identical to the test results, indicating that the performance of the tested composite structure could be accurately predicted by this type of FE model.

Dynamic Response Analysis And Shear Stud Damage Identification Of Steel-Concrete Composite Beams

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Composite Shear Behavior of Steel-Concrete Composite Beams under Sagging Moment

Experimental Studies on Shear Strength of Steel–Concrete Composite Beams

Damage Identification of Multi-Box Steel-Concrete Composite Bridges Based on Modal Curvature Difference Method

Accurate FEM of Steel-Concrete Composite Box Girder Bridge for Damage Identification Based on Dynamical Experimental Study

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Investigation of the shear resistances of steel-concrete-steel composite structures with bidirectional webs

Theoretical and Numerical Investigation of Damage Sensitivity of Steel–Concrete Composite Beam Bridges

Influence analysis of group studs stiffness in accelerated construction steel-concrete composite small box girder bridges

Vibration-Based Damage Detection of a Steel-Concrete Composite Slab Using Non-Model-Based and Model-Based Methods

Dynamic Analysis and Model Test on Steel-Concrete Composite Beams under Moving Loads

Numerical simulation on structural behavior of FRP profile‐concrete hybrid beams with bolt shear connector

Static Behavior of Stud Shear Connectors with Initial Damage in Steel-Uhpc Composite Bridges

Finite Element Modeling of Steel-concrete Composite Beams with Different Shear Connection Degrees

Time-dependent response of continuous steel-concrete composite beams under sustained loading

Investigating the shear behaviors of hollow core beams strengthened with ESS-HCC and shear steel rebars

Experimental and Numerical Study of Curved SFRC and ECC composite beams with Various Connectors

Shear resistance of steel-concrete-steel deep beams with bidirectional webs

Experimental and numerical investigation on the column-beam connection in the corrugated steel plate-concrete composite frame

Experiment-Based Fatigue Behaviors and Damage Detection Study of Headed Shear Studs in Steel–Concrete Composite Beams