Abstract:The study of the dynamic response characteristics of "W"-type deep canyon terrain to double-span concrete arch bridges under earthquake action holds great practical significance. In this research, a bridge in Sichuan Province is taken as the object of study. The boundary-integral equation method and peak frequency shift method are combined to apply an embedded linear time–history analysis algorithm to the finite element spatial dynamic calculation model of the entire bridge, resulting in an improved model. By comparing these two methods with model test results, the seismic response characteristics of the middle part of a "W" concrete arch bridge under different foundation depths and seismic intensities are examined. The boundary integral equation method was utilized to calculate ground motion response at any point on site, revealing a significant amplifying effect of increased seismic wave intensity on acceleration response at the top of the arch bridge. When input seismic wave intensity increased from 0.1 g to 0.3 g, maximum acceleration at buried depths of 3 m and 8 m in the middle of the arch bridge foundation increased by 102.63% and 79.16%, respectively, indicating that shallow buried depth structures are more sensitive to seismic wave intensity. Furthermore, using peak frequency shift rules for analyzing seismic wave propagation characteristics in "W"-type deep canyon topography confirms the sensitivity of shallow buried depth structures to seismic wave intensity and reveals the mechanism through which topography influences seismic wave propagation. This study provides a helpful method for understanding the propagation law and energy distribution characteristics of seismic waves in complex terrain. It was observed that the displacement at the top of the arch bridge increased significantly with an increase in seismic intensity. When subjected to 0.1 g, 0.2 g, and 0.3 g EI-Centro seismic waves, the maximum displacement at the top of the arch bridge model with a foundation buried depth of 3 m was 8 mm, 32 mm, and 142 mm, respectively. For arch bridge models with an 8-m foundation buried depth, these displacements were measured at 6.2 mm, 21 mm, and 68 mm, respectively. The results from model tests verified that increasing the depth of foundation burial effectively reduces the displacement at the top of the structure. Furthermore, by combining a boundary-integral equation method and peak-frequency shift method, this study accurately predicted significant influences on W-shaped double deep canyon topography from seismic response, and successfully captured stress concentration and seismic wave amplification/focusing effects on arch foot structures. The calculated results from both methods align well with model test data which confirm their effectiveness and complementarity when analyzing seismic responses under complex terrain conditions for bridge structures.

Analysis Of Dynamic Property And Seismic Response On Leaning Arch Bridge

Study on FE Models in Elasto-Plastic Seismic Performance Evaluation of Steel Arch Bridge

Damage Characteristics of Thin-Walled Steel Arch Bridges Subjected to In-Plane Earthquake Action

Effect of Transverse Earthquake Action on Development of Seismic Damage of Steel Arch Bridges

Seismic design for steel trussed arch to multi-support excitations

Stochastic seismic responses analysis of long-span rigid-framed bridge with high piers considering travelling wave effect

Investigation of elasto-plastic seismic response analysis method for complex steel bridges

Impact Factor Characteristics Of Double Parabolic Arch Ribs In A Cfst Arch Bridge Due To Vehicle Loads

Residual seismic performance of steel bridges under earthquake sequence

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Seismic Analysis of Long Span Continuous Rigid-Frame Bridge with Thin-Walled High Piers

SEISMIC ANALYSIS OF MULTI-SPAN CONTINUOUS REINFORCED CONCRETE RIGID-FRAME ARCH-BRIDGE

A Simplified Analysis Method for Reinforced Concrete Arch Bridge under Exceptionally Serious Earthquake

Random Seismic Response Analysis of Long-Span Arch Bridge under Three-Dimentional Multi-Supports Excitation

Strain-temperature Correlation Analysis of a Tied Arch Bridge Using Monitoring Data

Seismic performance analysis of a concrete filled steel tubes arch bridge: A parametric study

Analysis of Traveling Wave and Combined Site Effect of Long-Span Upper-Bearing Concrete-Filled Steel Tubular Arch Bridge

An Investigation into the Impact of Time-Varying Non-Conservative Loads on the Seismic Stability of Concrete-Filled Steel-Tube Arch Bridges

Aseismatic Analysis Of The Steel Structure Of Tianjin Bengbu Bridge

Study on Ground Motion Amplification in Upper Arch Bridge Due to "W"-Type Deep Canyon Using Boundary-Integral and Peak Frequency Shift Methods

The Influence of Long Span CFST Arch Bridge Deck under Seismic Load