Abstract:The size effect in the fracture of solids represents a highly critical issue with a prolonged history of research. The size effect of traditional quasi-brittle materials can already be well described through the size effect model. However, there is still a lack of research on the size effect of strain-hardening cementitious composites (SHCC), a special type of fibre-reinforced concrete with macro-scale strain-hardening behaviour after first cracking. Being distinct from traditional quasi-brittle materials with softening nature, SHCC is thus expected to behave differently in terms of size effect. In this research, the structural size effect problem of SHCC is comprehensively studied by experimental investigation and theoretical analysis. Geometrically similar notched three-point bending specimens were tested in mode I and mixed mode I/II fracture condition. The whole-process of failure and matrix cracking zone around the main crack was captured with high resolution by digital image correlation technology. Experimental results showed that apparent fracture energy, nominal strength, structural ductility and fracture resistance curve are all structural size-dependent. The apparent fracture energy was shown to arise with specimen size within the tested range. This is related to large-scale pseudo yielding, i.e. enlargement of matrix cracking zone (like the yielding zone in metals) with increasing structural size. It thus provides an indirect method for the estimation of cohesive fracture energy of single crack with constitutive nature. Due to the scaled matrix cracking zone, an intermediate asymptote exists in the size effect curve of nominal strength, in addition to the plastic and LEFM asymptotes in the Bažant original size effect law. This resembles the recent finding of intermediate asymptote in plastic-hardening metal( Dönmez et al. 2023 ). The size-dependence of R-curve was also examined. Though size-dependent, the equivalent LEFM-based R-curves are shown to have three common stages reflecting different cracking processes. Based on experimental results, the size effect of fracture energy and nominal strength are finally modelled theoretically in the Bažant's framework of equivalence between energy release and fracture resistance.

Fracture Mechanics Analysis On Smart-Cut(A (R)) Technology. Part 2: Effect Of Bonding Flaws

Fracture Mechanics Analysis on Smart-Cut ® Technology. Part 1: Effects of Stiffening Wafer and Defect Interaction

Fracture Mechanics Analysis of the Effects of Temperature and Material Mismatch on the Smart-Cut® Technology

Adiabatic Shear Fractures and Fragments of Cylindrical Structures under Internal Explosive Loading

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Cracking Behavior and Acoustic Emission Characteristics of Rock Containing a Single Preexisting Flaw

Mechanics Of Smart-Cut((R)) Technology

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

Residual Stress Concentration Due to Nano-Scaled Particulate Contamination at Direct Bonding Interface with Localized Material Inhomogeneity

Fracture analysis on die attach adhesives for stacked packages based on in-situ testing and cohesive zone model.

Splitting Failure in Brittle Rocks Containing Pre-Existing Flaws under Uniaxial Compression

Experimental and numerical study on splitting failure of brittle solids containing single pore under uniaxial compression

Modeling of Compression-Induced Splitting Failure in Heterogeneous Brittle Porous,Solids

Assessment of the Risk of Crack Formation at a Hybrid Bonding Interface Using Numerical Analysis

Pinning cracks by microstructure design in brittle materials

Theoretical Analysis of Stress Intensity Factors and Interactions of Collinear Flaws with Unequal Lengths in Brittle Solids Under Uniaxial Tensile Conditions

The Effects of Confining Compression on Fracture Coalesence in Rock-like Material

Fracture behavior of PBX simulation subject to combined thermal and mechanical loads

Thermal cracking: clarifying the effects of phases, voids and grains through characterisation and crystal plasticity modelling

Static Shear Fracture Influenced by Historic Stresses Path and Crack Geometries in Brittle Solids

Structural size effect in the mode I and mixed mode I/II fracture of strain-hardening cementitious composites (SHCC)